Loxeal 82-13 Datasheet Loxeal 82-13

CONTACT REP
Information provided by Gluespec

  • Description for Loxeal 82-13

    Loxeal 82-13 is a 1-Part Anaerobic Anaerobic methacrylate Liquid used to Retain Compounds Metal surfaces and Bolt M10 x 20 Zn

    *See Terms of Use Below

    Chemical Resistance Highly resistant to gases, Chemical Resistance: Fluid Resistance: Highly resistant to water, Highly resistant to hydrocarbons, Highly resistant to many chemicals
    Application Type Retaining, Sealing, Locking, Bond
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Substrate Metal surfaces, Bolt M10 x 20 Zn
    Industry For locking threads, For sealing threads
    Manufacturer Loxeal
    Chemistry Anaerobic methacrylate
    Cure Method Anaerobic, Room temperature
    Gap Fill (in) 0.004
    Cure Temperature (°C) 25, 25
    Cure Time (min) 720 to 1,440, 1,440 to 0.00
    Viscosity (cPs) 120 to 180
    Fluorescent Under blue light
    Color Green
    Torque (psi) 15 - 25 (N m), 35 - 45 (N m)
    Oil Resistance Highly resistant to oils
    High Temperature Resistance (°C) Highly resistant to heat, 150 to 0
    Low Temperature Resistance (°C) -55

  • Technical Data for Loxeal 82-13

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance : Fluid Resistance : Water Resistance - Highly resistant to water
      • Chemical Resistance - Highly resistant to many chemicals, Highly resistant to hydrocarbons, Highly resistant to gases
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Substrate
      • Metal - Metal surfaces
      • Zinc - Bolt M10 x 20 Zn
    • Industry
      • Mechanical Fastening Parts - For sealing threads, For locking threads
      • Industrial - For retaining of cylindrical components
    • Chemistry
    • Cure Method
      • Room Temperature / Air Dry - Room temperature
      • Anaerobic
    • Color
      • Green
    Specifications
    Cure Specs
    Gap Fill (in) 0.004
    Cure Temperature (°C) 25, 25 Test Method
    Cure Time (min) 720 to 1,440, 1,440 to 0.00 Test Method
    Viscosity (cPs) 120 to 180 Test Method
    Fixture or Handling Strength Time (min) 30 to 60 Test Method
    Fluorescent Under blue light
    Bond Strength
    Torque (psi) 15 - 25 (N m), 35 - 45 (N m)
    General Bond Strength (psi) High strength
    Shear Strength (psi) 2,176 to 4,351 Test Method
    Impact Strength (psi) 15 (kJ/m²) Test Method
    Material Resistance
    Oil Resistance Highly resistant to oils
    Non-Corrosive Highly resistant to corrosion
    Environmental Resistance Environmental resistance
    High Temperature Resistance (°C) Highly resistant to heat, 150 to 0 Test Method
    Low Temperature Resistance (°C) -55 Test Method
    Vibration Resistance/Shock Resistance Highly resistant to vibrations
    Other Properties
    Flash Point (°F) >212.0
    Business Information
    Shelf Life Details 1 year in original unopened packaging
    Shelf Life Temperature (°F) 77
    Shelf Life (mon) 12
    Not Good For
    Don't Use For Can damage coating
    Don't Use With Can damage some plastics, Can damage elastomers, Can damage some thermoplastics

  • Best Practices for Loxeal 82-13

    *See Terms of Use Below

    1. Surface Preparation

      Clean and degrease parts before bonding with Loxeal Cleaner 10.

    2. Application

      Apply product to fill completely the gap, assemble parts and hold on for curing time.

    3. Curing

      Curing rate depends on the assembly clearance, material surfaces and temperature. Functional strength is usually reached in 1 - 3 hours and full curing takes 24 - 36 hours. In case of passive surfaces and/or low temperature a fast cure can be obtained using Loxeal activator 11.

    4. Removal

      Remove any residue of cured product mechanically and clean parts with Acetone.

  • Comparable Materials for Loxeal 82-13

    *See Terms of Use Below

    Spec Engine® Results

    • Loxeal
      83-21(Loxeal)

      Loxeal 83-21 is a 1-Part Pressure sensitive Methacrylate Liquid used to Adhere Aluminum, Steel and Nickelled brass

    • Loxeal
      85-21(Loxeal)

      Loxeal 85-21 is a 1-Part Pressure sensitive Anaerobic methacrylate Liquid used to Adhere Steel pins/collars and Bolt M10 x 20 Zn

    • Loxeal
      85-02(Loxeal)

      Loxeal 85-02 is a 1-Part Pressure sensitive Methacrylate Liquid used to Adhere Aluminum, Steel and Zinc plated steel

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

Anaerobic Adhesives

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Viscosity Test Methods
Viscosity Temperature
120 to 180 cPs 25°C
Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time Fixture-Handling Strength Test Method Fixture-Handling Strength Time Temperature
30 to 60 min Bolt M10 x 20 Zn - quality 8.8 - nut h = 0,8 d, Handling cure time, Curing 25°C
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
25°C Bolt M10 x 20 Zn - quality 8.8 - nut h = 0,8 d, Functional cure time, Curing
25°C Bolt M10 x 20 Zn - quality 8.8 - nut h = 0,8 d, Full cure time, Curing
Cure Time Test Methods
Cure Time Test Method
720 to 1,440 min Bolt M10 x 20 Zn - quality 8.8 - nut h = 0,8 d, Functional cure time, Curing
1,440 to 0.00 min Bolt M10 x 20 Zn - quality 8.8 - nut h = 0,8 d, Full cure time, Curing
Impact Strength Test Methods
Impact Strength Cure Temperature Substrate Test Method
15 (kJ/m²) 25°C Bolt M10 x 20 Zn ASTM D950, Quality 8.8 - nut h = 0,8 d, Curing
Shear Strength Test Methods
Shear Strength Cure Temperature Substrate Test Method
2,176 to 4,351 psi 25°C Bolt M10 x 20 Zn ISO 10123, Quality 8.8 - nut h = 0,8 d, Curing
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
Highly resistant to heat
150 to 0°C Bolt M10 x 20 Zn - quality 8.8 - nut h = 0,8 d at +25°C, Curing
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-55°C Bolt M10 x 20 Zn - quality 8.8 - nut h = 0,8 d at +25°C, Curing