Application Type Bond 1 Part or 2 Part 1 Part Material Form Liquid, Synthetic Elastomer Substrate fabrics, metal, rubber, Steel, most porous substrates, non-porous substrates, EPDM rubber, painted metal, many substrates Industry Automobile openings such as doors, Rubber weatherstripping, EPDM weatherstripping Manufacturer 3M Chemistry Synthetic Elastomer, Petroleum Distillate, Toluene, Ethyl Alcohol Cure Method Room Temperature Cure Viscosity (cPs) 7,500 to 18,000 Color Black Creep Resistance good creep resistance High Temperature Resistance (°C) high-heat resistant, 121 Density (g/cm³) 6.8 (Lbs/Gallon)
Technical Data for 3M 08011
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Elastomer - Synthetic Elastomer
- Automotive Door - Automobile openings such as doors
- Weatherstrip - Rubber weatherstripping, EPDM weatherstripping
- Other - Synthetic Elastomer, Petroleum Distillate, Toluene, Ethyl Alcohol
- Room Temperature / Air Dry - Room Temperature Cure
Application Temperature (°F) >60 Viscosity (cPs) 7,500 to 18,000 Test Method
General Bond Strength (psi) High Peel Strength (piw) 15, 15 Test Method
Creep Resistance good creep resistance High Temperature Resistance (°C) high-heat resistant, 121
Flash Point (°F) -6.0 Test Method % Solids (%) 36 Test Method Density (g/cm³) 6.8 (Lbs/Gallon) Test Method
Shelf Life Details Store at room temperature. Rotate stock on a "first-in-first-out" basis. When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 24 months. Shelf Life Temperature (°F) 77 Shelf Life (mon) 24
Best Practices for 3M 08011
Thoroughly clean surfaces to be bonded. Wiping with 3M™ General Purpose Adhesive Cleaner, P.N. 08984, or 3M™ Gasket Prep and Parts Cleaner, P.N. 08901, will aid in removing oil and dirt from the surfaces to be bonded. Apply a thin uniform coat of adhesive on each surface. Allow adhesive to dry until tacky but will not transfer to your knuckle when touched.
Press surfaces together to insure intimate contact.
Excess adhesive can be cleaned off with 3M™ General Purpose Adhesive Cleaner.
Comparable Materials for 3M 08011
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.
Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of MaterialsRead Article
Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:Read Article
Viscosity Test Methods
|7,500 to 18,000 cPs||Brookfield Viscometer|
Peel Strength Test Methods
Density Test Methods
Flash Point Test Methods
|Flash Point||Test Method|
% Solids Test Methods
|% Solids||Test Method|