3M 08578 (Strip-Calk Black)
Application Type Bond 1 Part or 2 Part 1-Part Material Form Putty Substrate Aluminum, Glass, Bare Metal, Primed Metal Industry other non-visible automotive seams, gaps, and joints, engine compartments seams Manufacturer 3M Chemistry Butyl rubber, Solvent-free, Synthetic rubber Cure Method Pressure Snesitive Color Black High Temperature Resistance (°C) Excellent high temperature resistance, 93 Low Temperature Resistance (°C) -29 Density (g/cm³) 16.0 Appx. (Lbs/Gallon)
Technical Data for 3M 08578 (Strip-Calk Black)
- Adhesive - Bond
1 Part or 2 Part
- Automotive - other non-visible automotive seams, gaps, and joints
- Engine - engine compartments seams
- Other - for filling in joints, seams, voids, gaps, firewall, in areas requiring resistance to high temperatures
- Pressure Sensitive (min) - Pressure Snesitive
High Temperature Resistance (°C) Excellent high temperature resistance, 93 Low Temperature Resistance (°C) -29
% Solids (%) 100 Test Method Density (g/cm³) 16.0 Appx. (Lbs/Gallon)
Shelf Life Details Storage and Handling: Store at room temperature. Rotate stock on a "first-in-first-out" basis.;When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 12 months. Shelf Life Temperature (°F) 77 Shelf Life (mon) 12
Best Practices for 3M 08578 (Strip-Calk Black)
Always apply over automotive primer whenever possible. Applying product to bare metal will not provide additional corrosion protection Acid etching primer is not recommended, if used, be sure to allow to fully cure before applying seam sealer, as residual acid can weaken the bond.
If necessary, clean and dry surface with 3M™ General Purpose Adhesive Cleaner, PN 08984. Do not use an adhesive cleaner until the primer has fully cured.
Press bead of 3M™ Strip Caulk into area to be sealed smooth with finger or putty knife. For large openings, press several beads together.
Comparable Materials for 3M 08578 (Strip-Calk Black)
Spec Engine® Results
Closest Results from this Manufacturer