Application Type Bond 1 Part or 2 Part 1 Part Material Form Liquid Substrate Fabrics, Latex foams, Plastic, Flexible polyurethane, Galvanized steel, Wood, Aluminum, Galvanized steel, Many Plastic, Plywood Manufacturer 3M Chemistry Inorganic Salt, water-based Cure Method Pressure Sensitive, Solvent Viscosity (cPs) Water thin Color Clear High Temperature Resistance (°C) Heat resistance, 107 Low Temperature Resistance (°C) -34
Technical Data for 3M 1 Fastbond
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Furniture / Wood-Working - Wood, Plywood
- Other - Plastic laminate
- Other - Inorganic Salt
- Spray - Co-Spray
- Other - Hand
- Pressure Sensitive (min) - Pressure Sensitive
- Clear / Transparent - Clear
Viscosity (cPs) Water thin Fixture or Handling Strength Time (min) Immediate Work / Pot Time (min) No limited
High Temperature Resistance (°C) Heat resistance, 107 Low Temperature Resistance (°C) -34
Not Good For
Don't Use With bare steel surfaces (unless force dried and protected from moisture), Primed steel surfaces, painted steel surfaces
Best Practices for 3M 1 Fastbond
When using 3MTM FastbondTM Contact Adhesive 2000-NF with Spray Activator #1, it is required that at least one of each pair of substrates to be bonded be porous or water permeable.
Surfaces must be clean, dry and dust free.
Comparable Materials for 3M 1 Fastbond
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.