Application Type Bond 1 Part or 2 Part 1 Part Material Form Tape Pad Substrate Steel Manufacturer 3M Chemistry polypropylene, Hot-melt rubber-resin Cure Method Pressure Sensitive Color Tan, Transparent
Technical Data for 3M 3750P
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Tape - Tape Pad
- Other - Fiberboard
- Other - polypropylene, Hot-melt rubber-resin
- Pressure Sensitive (min) - Pressure Sensitive
- Brown - Tan
- Clear / Transparent - Transparent
Application Temperature (°F) 68 to 77
General Bond Strength (psi) 55 (oz./in.) Test Method Tensile Strength (psi) 35 (lbs./in.), 70 (lbs./in.) Test Method
Abrasion Resistance Strong Environmental Resistance Weather Impact Resistance Impact Resistance Vibration Resistance/Shock Resistance Shock
Elongation (%) 160 Test Method
Shelf Life Details Storage Conditions: Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40-50% relative humidity are recommended. Shelf Life Temperature (°F) 104 to 176
Best Practices for 3M 3750P
3M™ ScotchPad™ Tape Pad 3750P should be removed one at a time by grasping the end with a liner and pulling the sheet free from the pad. Place the far end of the sheet in the desired location and allow the sheet to adhere from that end back to the tabbed end. Flip out the tab and press the whole sheet flat.
The pad can be adhered in a convenient location when the back sheet of the pad is peeled away and the pad is placed on a vertical surface or on a table, then only one hand is needed to dispense tape sheets for use.
Application of ScotchPad Tape Pad 3750P is easiest at room temperature. At colder temperatures, approaching 32°F (0°C), the adhesive becomes more firm. Once applied, tape sheets perform well throughout the normal temperature ranges typically encountered by packaged products in shipping and storage environments.
Comparable Materials for 3M 3750P
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.
Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of MaterialsRead Article
Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:Read Article
Tensile Strength Test Methods
|Tensile Strength||Test Method|
|35 (lbs./in.)||ASTM D-3759, Machine Direction, width|
|70 (lbs./in.)||ASTM D-3759, Cross Direction, width|
General Bond Strength Test Methods
|General Bond Strength||Substrate||Test Method|
|55 (oz./in.)||Steel||ASTM D-3330, width|
Elongation Test Methods
|160 %||ASTM D-3759, at Break|