Application Type Bond 1 Part or 2 Part 1 Part Material Form Brick Substrate Fabric, Foam, Metal, Plastic, Paper, Wood Manufacturer 3M Chemistry Hot melt Cure Method Hot melt Viscosity (cPs) 18,000 Color Light Tan, Brick High Temperature Resistance (°C) 49 Key Specifications FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): FDA 21 CFR 175.105
Technical Data for 3M 3794 Hi Tack PSA
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Other - Brick
- Dispenser - Application equipment
- Flow - Flow equipment
- Hotmelt - Hot melt
- Brown - Light Tan
- Red - Brick
- FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): 175.105 - FDA 21 CFR 175.105
Viscosity (cPs) 18,000 Test Method Work / Pot Time (min) >1.00
General Bond Strength (psi) High
High Temperature Resistance (°C) 49
Specific Gravity 0.900 Flash Point (°F) 510.8 % Solids (%) 100
Shelf Life Details Store product below 120°F (49°C). When stored at the recommended conditions, this product has a shelf life of 12 months from the date of manufacture. Shelf Life Temperature (°F) <120 Shelf Life Type From the date of manufacture Shelf Life (mon) 12
Best Practices for 3M 3794 Hi Tack PSA
3M™ Jet-melt™ Adhesive 3794 is designed for application using a hand-held applicator, such as PAM HB700, or with most hot-melt bulk applicators. Apply to one surface in either a bead or a spray application. Although open time exceeds one minute, the bond strength is maximized when open time is reduced. After the bond is made there is immediate strength and no clamping is necessary. Optimum bond strength may require up to 24 hour dwell time.
Comparable Materials for 3M 3794 Hi Tack PSA
Spec Engine® Results
Closest Results from this Manufacturer
Questions about this material?
Get personal assistance with your specific application needs.