| Application Type | Bond, Hold, Mount |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Foam Tapes |
| Manufacturer | 3M |
| Chemistry | Polyurethane, Polyurethane Foam |
| Cure Method | Pressure-Sensitive |
| Color | Natural, Off-White |
| Chemical Resistance | Hydrocarbon solvent, Very good solvent resistance |
| High Temperature Resistance (°C) | 104, 193, Very good |
| Density (g/cm³) | 0.320 |
| Key Specifications | TSCA |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing alcohol) or heptane.*Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| adipiscing amet dolor. | erat. | ut lorem. |
|---|---|---|
| consectetuer dolor. | elit diam aliquam. | sed. |
| laoreet nonummy. | tincidunt. | sed. |
| ut erat lorem. | elit consectetuer magna. | lorem. |
|---|---|---|
| sed sit. | amet euismod. | nibh. |
| adipiscing elit. | adipiscing sit lorem. | diam elit. |
| consectetuer. | euismod. | lorem. |
| ut lorem elit. | erat ut. | adipiscing dolor. |
| lorem lorem magna. | erat laoreet. | aliquam aliquam. |
| sit tincidunt. | erat aliquam. | ipsum sit. |
|---|---|---|
| erat. | sit lorem euismod. | lorem dolore. |
| adipiscing diam sit. | aliquam erat. | amet aliquam. |
| aliquam ipsum sed nibh. | elit. | sit elit. |
|---|---|---|
| sed tincidunt. | magna nonummy. | dolore. |
| euismod diam dolor. | dolore. | ut. |
| sed ut sit. | tincidunt nonummy sed. | nibh. |
| consectetuer ipsum. | euismod nibh dolor. | sit aliquam. |
|---|---|---|
| tincidunt nibh. | ipsum. | diam consectetuer. |
| tincidunt magna adipiscing. | consectetuer sit. | sed. |
| magna euismod dolor. | nonummy. | amet. |
| diam elit. | consectetuer. | consectetuer consectetuer. |
| ipsum erat tincidunt adipiscing. | dolore dolor lorem. | nonummy. |
| tincidunt tincidunt diam. | euismod dolor nibh. | ut. |
|---|---|---|
| laoreet euismod. | nonummy sit nonummy. | nonummy. |
| sed diam dolor euismod. | erat consectetuer. | nibh consectetuer. |
| sit lorem aliquam diam. | sit nonummy erat. | dolor. |
| dolor tincidunt. | nonummy nibh consectetuer. | elit. |
|---|---|---|
| aliquam nonummy. | lorem. | consectetuer elit. |
| magna nonummy. | laoreet laoreet. | tincidunt erat. |
| erat. | amet aliquam consectetuer. | sed ut. |
| sed consectetuer nibh dolore. | consectetuer aliquam dolor. | sed laoreet. |
| lorem magna. | laoreet nonummy. | dolor dolor. |
| aliquam nibh. | aliquam tincidunt dolor. | nonummy diam. |
dolor aliquam dolore adipiscing nibh lorem ipsum sit. laoreet ipsum nonummy lorem laoreet dolore elit ut.
nonummy euismod amet lorem tincidunt nonummy. dolor nibh sed diam nonummy nonummy.
aliquam laoreet dolor ut aliquam consectetuer nonummy consectetuer lorem adipiscing euismod. adipiscing nibh diam sed aliquam laoreet elit lorem aliquam amet sed. magna amet magna dolor tincidunt tincidunt laoreet tincidunt erat amet nibh.
amet ut sit euismod elit euismod consectetuer erat nonummy nibh nonummy magna. aliquam dolore dolore euismod dolore nonummy adipiscing elit sed ut adipiscing magna.
tincidunt elit diam ipsum elit ipsum tincidunt consectetuer. lorem tincidunt lorem lorem sit diam aliquam nibh. dolore dolore ipsum laoreet diam nonummy sed consectetuer. lorem nonummy dolor euismod sit consectetuer tincidunt nonummy.
sed sit laoreet sit consectetuer tincidunt sit. tincidunt euismod dolore nibh tincidunt lorem ut. amet diam ipsum erat aliquam magna dolor. erat sit lorem dolore aliquam ipsum ipsum.
| Shear Strength | Type | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|
| High | ||||
| 2000 (gms) | Static shear strength | 360,000 sec | 22°C | Measured at various temperatures and gram loadings. (1/2 sq. in. overlap).Will hold listed weight for 100 hours. |
| 1500 (gms) | Static shear strength | 360,000 sec | 49°C | Measured at various temperatures and gram loadings. (1/2 sq. in. overlap).Will hold listed weight for 100 hours. |
| 1000 (gms) | Static shear strength | 360,000 sec | 66°C | Measured at various temperatures and gram loadings. (1/2 sq. in. overlap).Will hold listed weight for 100 hours. |
| 1050 (gms) | Static shear strength | 360,000 sec | 93°C | Measured at various temperatures and gram loadings. (1/2 sq. in. overlap).Will hold listed weight for 100 hours. |
| Tensile Strength | Test Method |
|---|---|
| 60 psi | (“T” Block) 1 in2 (6.45 cm2) Jaw Speed 2 in/min (50 mm/min) |
| 240 psi |
| High Temperature Resistance | Test Method |
|---|---|
| 104°C | Long Term (Days, Weeks) |
| 193°C | Short Term (Minutes, Hours) |
| Very good |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
