3M 4104

CONTACT REP

Description for 3M 4104

Adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized) as tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time.

*See Terms of Use Below

Chemical Resistance	Acetone, Chemical Resistance: MEK, Gasoline, JP-4 (jet fuel)
Application Type	Bond
1 Part or 2 Part	1-Part
Material Form	Single coated tape
Substrate	Acrylic, Aluminum, Glass, PVC (non-plasticized), Enameled steel, Latex-painted wood, Stainless steel, ABS, Lacquered wood
Manufacturer	3M
Chemistry	Acrylic, Urethane
Cure Method	Pressure Sensitive
Application Temperature (°F)	70 to 100
Color	Natural-white
High Temperature Resistance (°C)	93, 177
Low Temperature Resistance (°C)	-18
Density (g/cm³)	High, 0.192

Best Practices for 3M 4104

Register for FREE to view more details

Why register?

View Technical Details
View Test Methods
View Key Specifications
View Similar Materials
Save your Project Searches

See what Gluespec offers

Sign up now Already registered? Sign in!

Email: *

Password: *

Confirm Password: *

Do you prefer to see data in °F or °C?

First Name: *

Last Name: *

Phone: *

Company Name: *

Address: *

Postal Code: *

Country: *

Job Function: *

Industry: *

Describe: *

I agree to the terms of use *

*: Required

Technical Data for 3M 4104

*See Terms of Use Below

Overview

Chemical Resistance
- Chemical Resistance - Acetone, Gasoline, JP-4 (jet fuel)
- Chemical Resistance : Relative Solvent Resistance - MEK
Application Type
- Adhesive - Bond
1 Part or 2 Part
- 1-Part
Material Form
- Tape - Single coated tape
Substrate
- Glass
- Aluminum
- Steel - Enameled steel
- Acrylic (PMMA) - Acrylic
- Polyvinyl chloride (PVC) - PVC (non-plasticized)
- ABS
- Wood - Latex-painted wood, Lacquered wood
- Stainless Steel
Industry
- Industrial
Chemistry
- Acrylic
- Polyurethane - Urethane
Application Method
- Contact
Cure Method
- Pressure Sensitive (min) - Pressure Sensitive
Color
- White - Natural-white

Specifications

Cure Specs

Application Temperature (°F)	70 to 100

Bond Strength

Shear Strength (psi)	Excellent
Tensile Strength (psi)	115	Test Method

Material Resistance

High Temperature Resistance (°C)	93, 177
Low Temperature Resistance (°C)	-18

Conductivity

Dielectric Strength (V/mil)	50	Test Method
Thermal Conductivity (W/m°K)	0.86	Test Method
Surface Resistivity (O)	1e15 (ohms/sq), 1e15 (ohms/sq)	Test Method

Hardness

Elongation (%)	100	Test Method
Shore OO Hardness	75	Test Method

Other Properties

Density (g/cm³)	High, 0.192	Test Method

Business Information

Shelf Life Details	Storage: Store in the original cartons at 60-80°F (15-27°C) and 50% relative humidity.
Shelf Life Temperature (°F)	140 to 176
Shelf Life Type	From date of manufacture
Shelf Life (mon)	18

Best Practices for 3M 4104

*See Terms of Use Below
1. Surface Preparation
  
  To obtain optimum adhesion, the bonding surface must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol and heptane.
  
  Be sure to follow the solvent manufacturer’s precautions and directions for use when handling solvents.
2. Application
  
  Bond strength is dependent upon the amount of adhesive-to-surface contact. Firm application pressure develops better adhesive contact and helps improve bond strength.
  
  Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
Comparable Materials for 3M 4104

*See Terms of Use Below

Spec Engine^® Results
- Single-Coated Urethane Foam Tape 4314(3M)
  A conformable, grey, low-density, opencell foam with pressure sensitive acrylic adhesive on one side.
- 4318(3M)
  Adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized) as tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time.
- 4718(3M)
  Adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized) as tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time.
- Compare All