Application Type Bond, Hold 1 Part or 2 Part 1 Part Material Form Paper Tapes Substrate Fabrics, Natural rubber, Rubbers, Steel, Paper Manufacturer 3M Chemistry Natural Rubber Color Off White Relative Solvent Resistance Chemical Resistance: Medium solvent resistance High Temperature Resistance (°C) 66, 82
Technical Data for 3M 410B
- Adhesive - Bond, Hold
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Tape - Paper Tapes
- Other - Natural Rubber
- Off-White - Off White
Application Temperature (°F) 70 to 100
General Bond Strength (psi) Good to excellent Peel Strength (piw) 55 (Oz./in.) Test Method
UV Resistance UV resistance High Temperature Resistance (°C) 66, 82
Shelf Life Details Store in original cartons at 70°F (21°C) and 50% relative humidity., When stored under proper conditions, product retains its performance and properties for one year from date of manufacture. Shelf Life Temperature (°F) 70 Shelf Life Type from date of manufacture Shelf Life (mon) 12
Best Practices for 3M 410B
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or heptane.*
*Be sure to follow manufacturer’s safety precautions and directions for use when using solvents.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
Comparable Materials for 3M 410B
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.