3M 4799

3M 4799 Datasheet
BUY ONLINE

  • Description for 3M 4799

    • Quick drying adhesive with fast strength buildup • Provides low soak-in on most porous substrate • Dries to a flexible, water resistant bond •<br/>

    *See Terms of Use Below

    Application Type Bond
    1 Part or 2 Part 1 Part
    Material Form Paste
    Substrate Porous, Linoleum, Plastic, PTFE, EPDM Rubber, Rubber, Wood, Concrete, Metal, Sponge rubber
    Manufacturer 3M
    Chemistry SBR, n-Hexane, Petroleum Distillate, Toluene
    Application Method Spatula, Trowel
    Cure Method Solvent
    Cure Time (min) Quick
    Viscosity (cPs) 7,500 to 18,000
    Color Black
    High Temperature Resistance (°C) 82
    Low Temperature Resistance (°C) -34

  • Technical Data for 3M 4799

    *See Terms of Use Below

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Paste
    • Substrate
      • Porous Substrates - Porous
      • Concrete
      • Metal - Linoleum
      • Plastic
      • Fluoropolymer Teflon (PTFE) - PTFE
      • Rubber - Sponge rubber
      • EPM/EPDM - EPDM Rubber
      • Wood
      • Other - Canvas, Felt
    • Industry
    • Chemistry
      • Butyl - SBR
      • Other - n-Hexane, Petroleum Distillate, Toluene
    • Application Method
      • Dispenser - Application equipment
      • Brush
      • Flow - Flow equipment, Inject
      • Spatula/Trowel - Spatula, Trowel
    • Cure Method
      • Solvent
    • Color
      • Black
    Specifications
    Cure Specs
    Application Temperature (°F) 64
    Cure Time (min) Quick
    Viscosity (cPs) 7,500 to 18,000 Test Method
    Bond Strength
    General Bond Strength (psi) Fast
    Peel Strength (piw) 16, 22, 25, 26, 28, 28, 14, 9, 5 Test Method
    Material Resistance
    High Temperature Resistance (°C) 82
    Low Temperature Resistance (°C) -34
    Hardness
    Flexibility Flexible
    Other Properties
    Flash Point (°F) -14.8
    % Solids (%) 28 to 35 Test Method
    Business Information
    Shelf Life Details Store product at 60-80°F (16-27°C) for maximum storage life. Higher temperatures reduce normal storage life. Lower temperatures cause increased viscosity of a temporary nature. Rotate stock on a “first in-first out” basis.;When stored at the recommended conditions and kept in the original, unopened container, this product has a shelf life of one year from date of shipment.
    Shelf Life Temperature (°F) 61 to 81
    Shelf Life Type from date of shipment
    Shelf Life (mon) 12

  • Best Practices for 3M 4799

    *See Terms of Use Below

    1. Surface Preparation

      Surfaces to be bonded must be clean, dry and dust free. Wiping with a solvent such as methyl ethyl ketone (MEK)* will aid in removing oil and dirt.

      *Note: When using solvents, extinguish all sources of ignition in the area and follow the manufacturer’s precautions and directions for use when handling such materials.

    2. Application

      For best results the temperature of the adhesive and the surfaces being bonded must be at least 65°F (18°C).

      Stir or agitate well before using.

      Porous Surface(s): Brush a uniform, generous coat of adhesive on the least porous surface to be bonded. Assemble the materials immediately with sufficient pressure to ensure contact.

      Non-Porous Surface(s): Apply a uniform coat of adhesive to each surface. Allow adhesive to dry until it is tacky, but does not transfer. Assemble materials with sufficient pressure to ensure contact.

    3. Clean-Up

      Excess adhesive may be removed with a solvent such as methyl ethyl ketone (MEK).

      *Note: When using solvents, extinguish all sources of ignition in the area and follow the manufacturer’s precautions and directions for use when handling such materials.

  • Comparable Materials for 3M 4799

    *See Terms of Use Below

    Spec Engine® Results

  Download Technical Data Sheet   Save This Material Saved Items

Questions about this material?

3M - 4799

Get personal assistance with your specific application needs.

Your Profile Edit
Submit

Popular Articles

Testing the effectiveness of surface treatments

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Intro to Protecting Power Supplies

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Which answer best describes a project you are currently working on?
Viscosity Test Methods
Viscosity Test Method
7,500 to 18,000 cPs Brookfield Viscometer RVF #6 sp. @ 20 rpm
Peel Strength Test Methods
Peel Strength Type Cure Time Cure Temperature Substrate Test Temperature
16 piw 180° Peel strength 1,440 min 24°C Canvas-Steel 24°C
22 piw 180° Peel strength 4,320 min 24°C Canvas-Steel 24°C
25 piw 180° Peel strength 7,200 min 24°C Canvas-Steel 24°C
26 piw 180° Peel strength 10,080 min 24°C Canvas-Steel 24°C
28 piw 180° Peel strength 20,160 min 24°C Canvas-Steel 24°C
28 piw 180° Peel strength 30,240 min 24°C Canvas-Steel 24°C
14 piw 180° Peel strength >30,240 min 24°C Canvas-Steel -34°C
9 piw 180° Peel strength >30,240 min 24°C Canvas-Steel 66°C
5 piw 180° Peel strength >30,240 min 24°C Canvas-Steel 82°C
% Solids Test Methods
% Solids Test Method
28 to 35 % By weight
;