3M 7952MP

3M 7952MP Datasheet
  • Description for 3M 7952MP

    Excellent resistance to harsh environments, this adhesive can withstand splashes of organic solvents, weak acids and bases and salt water, cleaning solutions, germicidals, disinfectants, oils, etc. In addition, it performs well after exposure to humidity and hot/cold cycles.

    *See Terms of Use Below

    Application Type Bond, Lamination
    1 Part or 2 Part 1 Part
    Material Form Transfer Tape
    Substrate Plastic: Acrylic, Aluminum, Glass, Metal, plastic, polycarbonate, Polyester, rigid PVC (unplasticized), Stainless Steel, Aluminum Foil, ABS, high surface energy plastics
    Industry membrane switch applications, Transportation: automotive, electronic markets, graphic overlays for membrane switches, telecommunications, flexible circuits
    Manufacturer 3M
    Chemistry acrylic
    Cure Method Pressure Sensitive
    Color Clear
    Chemical Resistance gasoline, MEK, weak acid, weak base, oil, water, salt water, warm/humid, cleaning solutions, germicidals, disinfectants, oils
    Relative Solvent Resistance Chemical Resistance: splashes of organic solvents, Chemical Resistance: Excellent Solvent Resistance
    High Temperature Resistance (°C) Excellent, 204, 149, Performs well after exposure to hot/cold cycles
    Low Temperature Resistance (°C) Performs well after exposure to hot/cold cycles, -35, -40
    Key Specifications UL 969
  • Technical Data

    Overview
    • euismod euismod.
      • amet sit sit.
        erat tincidunt adipiscing.
        ipsum tincidunt nonummy.
    • elit dolor dolor dolor.
      • adipiscing.
        ipsum.
    • nibh.
      • sit aliquam.
        elit amet.
        erat ut.
    • euismod consectetuer diam erat.
      • nonummy dolore.
        erat diam.
        erat amet.
    Specifications
    diam laoreet nibh.
    erat lorem. nibh adipiscing. ut amet.
    adipiscing amet erat. tincidunt dolore diam. nibh diam.
    aliquam amet. elit dolor. adipiscing.
    nonummy. nibh. euismod.
    nonummy. consectetuer ut adipiscing. adipiscing amet.
    dolore diam ut adipiscing. sit nonummy euismod. adipiscing nonummy.
    sit. diam. erat.
    ut sit laoreet ut. aliquam aliquam aliquam. dolor.
    erat laoreet. dolore aliquam euismod. ut ipsum.
    ut.
    consectetuer erat euismod. consectetuer. adipiscing laoreet.
    aliquam. adipiscing dolore dolor. amet magna.
    ut consectetuer laoreet. dolor. nibh tincidunt.
    sit sed sit. sit. dolor elit.
    sed nibh aliquam lorem. euismod. dolore consectetuer.
    lorem.
    dolore ut sed lorem. aliquam. sed nibh.
    ut ipsum adipiscing nonummy. amet nonummy. lorem.
    sed. sit aliquam euismod. laoreet.
    consectetuer magna.
    aliquam lorem. elit. tincidunt.
    dolore. sed diam. erat.
    diam. erat. sit.
    aliquam elit. ut dolore. dolore.
  • Best Practices

    *See Terms of Use Below

    1. elit lorem euismod nonummy.

      ipsum magna sed sed dolor tincidunt erat ut erat. tincidunt euismod amet elit diam ipsum magna sed aliquam.

      sed diam erat tincidunt elit diam laoreet sit nibh tincidunt magna nibh. ut magna nonummy diam aliquam sed lorem magna sed nibh elit amet. sit amet lorem adipiscing sit sit euismod dolore elit euismod euismod sed. diam laoreet ut sit amet nonummy sed erat ut tincidunt tincidunt nibh. nibh sed nonummy diam amet magna diam dolore ipsum ut diam sit.

    2. elit ipsum lorem.

      dolor erat sit ut magna tincidunt magna. sit elit diam nonummy nonummy diam ut.

    3. euismod diam dolor.

      consectetuer nonummy ut ut nonummy lorem aliquam tincidunt sed euismod consectetuer. diam sed elit laoreet elit amet nibh tincidunt tincidunt amet aliquam. tincidunt lorem ut amet ut aliquam sed ut erat diam laoreet.

  • Comparable Materials

    *See Terms of Use Below

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Testing the effectiveness of surface treatments

Read Article

An Overview of Fluid Dispensing Systems & How They’re Used

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Peel Strength Test Methods
Peel Strength Type Cure Time Cure Temperature Substrate Chemical Test Time Test Temperature Test Method
47 (ounces/inch) 90° Peel Strength 15 min 25°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
82 (ounces/inch) 90° Peel Strength 4,320 min 25°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
168 (ounces/inch) 90° Peel Strength 4,320 min 70°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
77 (ounces/inch) 90° Peel Strength 4,320 min 25°C Aluminum ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
62 (ounces/inch) 90° Peel Strength 4,320 min 25°C ABS ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
61 (ounces/inch) 90° Peel Strength 4,320 min 25°C Acrylic ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
80 (ounces/inch) 90° Peel Strength 4,320 min 25°C Glass ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
58 (ounces/inch) 90° Peel Strength 4,320 min 25°C Polycarbonate ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
62 (ounces/inch) 90° Peel Strength 4,320 min 25°C Rigid PVC (Unplasticized) ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
66 (ounces/inch) 90° Peel Strength 15 min 25°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
118 (ounces/inch) 90° Peel Strength 4,320 min 25°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
181 (ounces/inch) 90° Peel Strength 4,320 min 70°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
115 (ounces/inch) 90° Peel Strength 4,320 min 25°C Aluminum ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
68 (ounces/inch) 90° Peel Strength 4,320 min 25°C ABS ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
67 (ounces/inch) 90° Peel Strength 4,320 min 25°C Acrylic ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
92 (ounces/inch) 90° Peel Strength 4,320 min 25°C Glass ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
65 (ounces/inch) 90° Peel Strength 4,320 min 25°C Polycarbonate ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
69 (ounces/inch) 90° Peel Strength 4,320 min 25°C Rigid PVC (Unplasticized) ASTM D3330 modified (90° peel, 2 mil aluminum foil backing with 72 hour dwell), 2 mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, gasoline - 1 hour RT immersion, 89% 60 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, MEK - 1 hour RT immersion, 64% 60 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, weak acid - 4 hour RT immersion, 86% 240 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, weak base - 4 hour RT immersion, 84% 240 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, oil (10W30) - 72 hour, 120°F (49°C) immersion, 146% 4,320 min 49°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, water - 100 hours, 70°F (21°C), 105% 6,000 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, salt water (5%) - 72 hours, 70°F (21°C), 105% 4,320 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, warm/humid - 7 days, 90°F (32°C) and 90% relative humidity, 131% 7 (days) 32°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, UV cabinet - 30 days, 70°F (21°C), 147% 30 (days) 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - I, 148% 0.07 min 70°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - II, 148% 0.07 min -29°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - III, 148% 0.27 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, gasoline - 1 hour RT immersion, 83% 60 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, MEK - 1 hour RT immersion, 66% 60 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, weak acid - 4 hour RT immersion, 86% 240 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, weak base - 4 hour RT immersion, 83% 240 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, oil (10W30) - 72 hour, 120°F (49°C) immersion, 146% 4,320 min 49°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, water - 100 hours, 70°F (21°C), 116% 6,000 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, salt water (5%) - 72 hours, 70°F (21°C), 93% 4,320 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, warm/humid - 7 days, 90°F (32°C) and 90% relative humidity, 101% 10,080 min 32°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, UV cabinet - 30 days, 70°F (21°C), 93% 43,200 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - I, 158% 240 min 70°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - II, 158% 240 min -29°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - III, 158% 960 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
77 (ounces/inch) 180° Peel Strength 0.00 min Stainless Steel ASTM D3330 modified (180° peel, 2 mil al foil), 2 mil (0.002 inches)
133 (ounces/inch) 180° Peel Strength 0.00 min Stainless Steel ASTM D3330 modified (180° peel, 2 mil al foil), 5 mil (0.005 inches)
Shear Strength Test Methods
Shear Strength Type Substrate Test Time Test Temperature Test Method
Excellent
55 (lbs.) Lap shear strength aluminum Peak Load, ASTM D1002-72, (0.5 square inch on #6061 aluminum)
109 psi Lap shear strength Peak Stress, ASTM D1002-72
1000 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 23°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
1000 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 70°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
1000 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 93°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
500 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 177°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
400 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 232°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
200 (grams) Lap shear strength 600,000 sec 232°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 5 mil
Tensile Strength Test Methods
Tensile Strength Test Method
51 psi ASTM D2360-82
Moisture/Humidity Resistance Test Methods
Moisture/Humidity Resistance Test Method
Performs well after exposure to humidity After exposure for 7 days at 90°F (32°C) and 90% relative humidity.
Insulation Resistance Test Methods
Insulation Resistance Test Method
Insulation Resistance
>1e10 (ohms) (test voltage = 100 VDC) Mil-I-46058C
Dielectric Strength Test Methods
Dielectric Strength Test Method
880 V/mil (500 vac, rms[60 hz/sec]) ASTM D149-92
Dielectric Constant Test Methods
Dielectric Constant Test Method
3.40 (at 1kHz) ASTM D150-92
Thermal Conductivity Test Methods
Thermal Conductivity Temperature Test Method
0.17 W/m°K 43°C ASTM C 518, results listed are at 109°F
Elongation Test Methods
Elongation Test Method
1,951 % ASTM D2360-82
Coefficient of Thermal Expansion (CTE) Test Methods
Coefficient of Thermal Expansion (CTE) CTE Test Method
28e-5 (m/m/C) first heat, ASTM D 696
72e-5 (m/m/C) second heat, ASTM D 696
-6e-5 (m/m/C) first heat, ASTM D 696
92e-5 (m/m/C) second heat, ASTM D 696