3M 8681HS Datasheet 3M 8681HS

CONTACT REP
Information provided by Gluespec

  • Description for 3M 8681HS

    Polyurethane Protective Tape

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Solvant resistance
    Application Type Bond
    1 Part or 2 Part 1-Part
    Material Form Tape
    Substrate Bare Aluminum, ABS, Acrylic Enamel Paint
    Manufacturer 3M
    Chemistry Polyurethane, Acrylic
    Cure Method Pressure Sensitive
    Color Gray, Matte transparent
    Puncture Resistance (g) Resists Punctures
    High Temperature Resistance (°C) 135, <93, <82
    Other Resistance Resists Erosion
    Key Specifications Mil-Spec (United States Military Standard): Mil-P-23377 Epoxy Primer; Mil-PRF-85285

  • Technical Data for 3M 8681HS

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance : Relative Solvent Resistance - Solvant resistance
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Tape
    • Substrate
      • Aluminum - Bare Aluminum
      • ABS
      • Acrylic (PMMA) - Acrylic Enamel Paint
      • Other - Painted surfaces
    • Industry
      • Other - Protecting a surface from corrosion, Protecting a surface from abrasion, Protecting a surface from minor impact damage
    • Chemistry
    • Application Method
      • Contact
    • Cure Method
      • Pressure Sensitive (min) - Pressure Sensitive
    • Color
      • Clear / Transparent - Matte transparent
      • Gray
    • Key Specifications
      • Mil-Spec (United States Military Standard) : P-23377 - Mil-P-23377 Epoxy Primer; Mil-PRF-85285
      • Mil-Spec (United States Military Standard) : PRF-85285 - Mil-P-23377 Epoxy Primer; Mil-PRF-85285
    Specifications
    Bond Strength
    Peel Strength (piw) 135 (oz/in), 52 (oz/in), 55 (oz/in), 90 (oz/in), 60 (oz/in), 72 (oz/in), 52 (oz/in), 55 (oz/in) Test Method
    Shear Strength (psi) High
    Tear Strength (piw) Resists Tearing
    Tensile Strength (psi) 87 (lb/in), 87 (lb/in), 120 lb/in Test Method
    Material Resistance
    Puncture Resistance (g) Resists Punctures
    Abrasion Resistance Resists Abrasion
    UV Resistance Ultraviolet light resistance
    Environmental Resistance Weather resistance properties
    High Temperature Resistance (°C) 135, <93, <82 Test Method
    Other Resistance Resists Erosion
    Hardness
    Elongation (%) 500 Test Method
    Other Properties
    % Solids (%) 100
    Business Information
    Shelf Life Details Keep film in clean area, away from excessive moisture and out of direct sunlight. Store rolls in the shipping carton Return partially used rolls to shipping carton.
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 24

  • Best Practices for 3M 8681HS

    *See Terms of Use Below

  • Comparable Materials for 3M 8681HS

    *See Terms of Use Below

    Spec Engine® Results

    • 3M
      4108(3M)

      Adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized) as tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time.

    • 3M
      8663DL(3M)

      Made from an exceptionally tough abrasion resistant polyurethane elastomer that resists punctures, tearing, abrasion and erosion. It is formulated for resistance to ultraviolet light. It provides a simple, easy method of protecting a surface from corrosion, abrasion and minor impact damage.

    • 3M
      4085(3M)

      Off-white, open-cell urethane foam carrier • High tack adhesive • Attach wire clips, Attach air fresheners

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Instant Adhesives Guide

Read Article

Plastic Bonding with Adhesives - Considerations Q&A

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M 8681HS

All 3M Materials
View Now

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Tensile Strength Test Methods
Tensile Strength Test Method
87 (lb/in) ASTM D882, @ Break
87 (lb/in) ASTM D412, @ Break
120 lb/in ASTM D882, @ Break
Peel Strength Test Methods
Peel Strength Cure Temperature Substrate Test Method
135 (oz/in) 21°C Bare Alluminum ASTM D-3330
52 (oz/in) 21°C Acrylic Enamel Paint ASTM D-3330
55 (oz/in) 21°C ABS Plastic ASTM D-3330
90 (oz/in) 21°C Mil-P-23377 Epoxy Primer ASTM D882
60 (oz/in) 21°C Mil-PRF-85285 ASTM D882
72 (oz/in) 21°C Bare Aluminum ASTM D-1000
52 (oz/in) 21°C Acrylic Enamel Paint ASTM D-1000
55 (oz/in) 21°C ABS Plastic ASTM D-1000
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
135°C
<93°C Service Temperature
<82°C Service Temperature
Elongation Test Methods
Elongation Test Method
500 % ASTM D882 (at Break)