Application Type Bond 1 Part or 2 Part 1 Part Material Form Transfer tape Substrate A wide variety of similar and dissimilar materials, Glass, Metal, Paper, many Plastics, Steel, Wood Manufacturer 3M Chemistry medium firm acrylic Cure Method Pressure Sensitive Color Clear Relative Solvent Resistance Chemical Resistance: Good High Temperature Resistance (°C) 82, 121
Technical Data for 3M 924
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Tape - Transfer tape
- Other - Mounting Promotional items, posters, Core starting, Mounting picture frame mat boards, dust covers
- Acrylic - medium firm acrylic
- Pressure Sensitive (min) - Pressure Sensitive
- Clear / Transparent - Clear
Application Temperature (°F) 70 to 100
General Bond Strength (psi) High, 25 (oz./in.) Test Method Shear Strength (psi) Good
UV Resistance Excellent High Temperature Resistance (°C) 82, 121
Shelf Life Details Shelf Life of Tape in Roll Form: 24 months from the manufacturing date when stored in original cartons at 70°F (21°C) and 50% relative humidity. Shelf Life Temperature (°F) 70 Shelf Life Type From date of manufacture Shelf Life (mon) 24
Best Practices for 3M 924
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or heptane. Note
Be sure to follow the manufacturer's precautions and directions for use when using solvents.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
Comparable Materials for 3M 924
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.