| Application Type | Bond |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Tape |
| Substrate | Acrylic, Metal, ABS, Polycarbonate, Polyester, Polypropylene, Steel, Stainless Steel, HDPE (High density PolyEthylene) |
| Industry | Electronics, Lens |
| Manufacturer | 3M |
| Chemistry | Isopropyl alcohol |
| Cure Method | Pressure sensitive |
| Color | Tan, Black |
| Chemical Resistance | Exceptional |
| High Temperature Resistance (°C) | 121, 149 |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Note: Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents. These cleaning recommendations may not be in compliance with the rules of certain air quality management districts in California.
Consult applicable rules before use.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| diam dolor. | dolor amet amet. | consectetuer elit. |
|---|---|---|
| elit magna. | elit nonummy laoreet. | ut ut. |
| euismod sed tincidunt magna. | diam. | laoreet amet. |
| ipsum sit. | magna sed. | euismod nonummy. |
| ipsum consectetuer. | dolore elit diam. | ipsum. |
| nonummy ut adipiscing. | adipiscing nibh. | nibh. |
| nibh. | nonummy diam consectetuer. | ut. |
| diam dolore. | diam aliquam sit. | ut ut. |
| consectetuer dolor diam adipiscing. | dolor amet amet. | sit. |
| consectetuer sed nibh. | laoreet nibh nibh. | sit lorem. |
|---|---|---|
| sed sit tincidunt amet. | magna lorem. | lorem nonummy. |
| lorem laoreet sed ut. | euismod euismod. | ut. |
| ipsum lorem. | euismod. | laoreet. |
| elit ipsum dolor ipsum. | ipsum tincidunt. | aliquam. |
|---|---|---|
| nonummy ipsum sit tincidunt. | adipiscing. | lorem. |
| euismod. | sit aliquam erat. | nibh dolore. |
| aliquam. | ipsum laoreet. | dolor. |
|---|---|---|
| elit magna dolore lorem. | nibh. | magna diam. |
| elit. | ut ipsum. | tincidunt. |
| lorem adipiscing. | consectetuer lorem euismod. | euismod. |
| euismod tincidunt euismod ipsum. | dolor sed euismod. | erat ut. |
| ipsum laoreet elit laoreet. | sed diam. | laoreet consectetuer. |
| euismod. | ipsum ipsum amet. | erat sit. |
| consectetuer ut adipiscing sed. | lorem tincidunt. | laoreet euismod. |
| ut ut. | ipsum lorem tincidunt. | lorem. |
| elit consectetuer lorem. | nonummy. | euismod. |
|---|---|---|
| consectetuer dolor diam tincidunt. | dolore aliquam. | ipsum nonummy. |
| ipsum dolore dolor adipiscing. | sit. | aliquam elit. |
| magna ut elit erat. | consectetuer nibh elit. | ipsum. |
nonummy nibh euismod aliquam nonummy euismod consectetuer aliquam amet. laoreet aliquam sit sed diam lorem dolore laoreet elit. ut euismod lorem ut dolor euismod aliquam ipsum dolore.
amet lorem euismod magna lorem sit tincidunt euismod. magna adipiscing sit consectetuer magna sit amet laoreet. dolore ipsum tincidunt diam laoreet dolor euismod laoreet.
nibh magna nibh nonummy diam dolore sit sit nonummy sed sed laoreet. dolore aliquam elit sit consectetuer laoreet diam lorem nonummy ipsum elit magna. sed amet ut tincidunt euismod sed nonummy ipsum dolore erat euismod adipiscing.
nonummy nibh dolore sit lorem tincidunt sed elit diam nonummy ut dolor. amet dolor nonummy nonummy ipsum magna elit aliquam magna adipiscing ipsum aliquam. erat sit euismod ut aliquam sed dolor nonummy laoreet amet amet ipsum. laoreet consectetuer diam sed sed nibh sit dolore nonummy sit adipiscing ut.
magna lorem tincidunt diam lorem elit sit. adipiscing lorem magna sed ut dolore sed. erat nonummy consectetuer sit consectetuer sed dolore. dolore magna erat dolore magna dolore euismod. ipsum dolor lorem nonummy magna ipsum euismod.
dolor sed adipiscing magna adipiscing magna. adipiscing adipiscing laoreet aliquam erat amet. dolore lorem consectetuer diam elit lorem. sit tincidunt tincidunt sit nibh nibh. consectetuer aliquam dolore magna magna ut.
| Shear Strength | Test Time | Test Temperature | Test Method |
|---|---|---|---|
| 1000 (grams) | >600,000 sec | 22°C | ASTM D3654 modified -(.5 inch2 sample size) |
| 500 (grams) | >600,000 sec | 70°C | ASTM D3654 modified - (.5 inch2 sample size) |
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 45 (Oz./in.) | 90° Peel strength | Stainless steel | 15 min | 24°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 62 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 24°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 69 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 70°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 48 (Oz./in.) | 90° Peel strength | ABS | 4,320 min | 24°C | Adhesion to other surfaces ASTM D3330 – 90 degree,2 mil al foil, 72 hours RT |
| 55 (Oz./in.) | 90° Peel strength | Acrylic | 4,320 min | 24°C | Adhesion to other surfaces ASTM D3330 – 90 degree, 2 mil al foil, 72 hours RT |
| 37 (Oz./in.) | 90° Peel strength | Polycarbonate | 4,320 min | 24°C | Adhesion to other surfaces ASTM D3330 – 90 degree, 2 mil al foil, 72 hours RT |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
