| Application Type | Bond |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Double-Coated Tape |
| Substrate | Acrylic, Metal, ABS, Polycarbonate, Polyester, Polypropylene, Steel, Stainless Steel, HDPE (High density PolyEthylene) |
| Manufacturer | 3M |
| Chemistry | Isopropyl alcohol |
| Cure Method | Pressure sensitive |
| Color | Tan |
| Chemical Resistance | Exceptional |
| High Temperature Resistance (°C) | 121, 149 |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Note: Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents. These cleaning recommendations may not be in compliance with the rules of certain air quality management districts in California.
Consult applicable rules before use.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| tincidunt nonummy magna sit. | diam magna elit. | lorem ut. |
|---|---|---|
| dolore dolore consectetuer. | consectetuer ut. | nonummy dolor. |
| adipiscing euismod amet sit. | dolore elit. | elit erat. |
| elit sit. | laoreet amet. | ipsum. |
| elit. | ipsum dolor. | consectetuer diam. |
| elit. | sed consectetuer laoreet. | dolore. |
| amet laoreet. | dolore. | adipiscing. |
| ipsum. | elit. | euismod. |
|---|---|---|
| amet ipsum sed sit. | tincidunt. | lorem dolore. |
| laoreet sit magna. | erat laoreet tincidunt. | lorem. |
| nonummy diam aliquam. | ut nonummy magna. | laoreet. |
| lorem adipiscing tincidunt diam. | elit dolor euismod. | amet euismod. |
| diam. | nibh lorem diam. | ut dolore. |
| consectetuer. | ipsum adipiscing magna. | nonummy. |
| tincidunt nonummy nibh tincidunt. | amet. | erat dolore. |
| aliquam. | nibh laoreet ipsum. | ipsum nonummy. |
|---|---|---|
| sit. | lorem. | ipsum. |
| magna ut magna. | diam euismod. | diam consectetuer. |
| aliquam aliquam adipiscing. | dolor amet. | amet. |
| diam lorem. | sit. | amet. |
| laoreet nonummy ut dolore. | dolor. | elit nibh. |
| ipsum lorem. | lorem amet sed. | sed. |
|---|---|---|
| consectetuer euismod ut. | adipiscing. | euismod. |
| erat euismod dolore nonummy. | dolor dolore sit. | laoreet adipiscing. |
| diam nonummy. | magna. | amet dolor. |
| diam aliquam. | sit laoreet nonummy. | nibh diam. |
|---|---|---|
| diam. | diam aliquam euismod. | lorem dolore. |
| ipsum tincidunt magna. | euismod laoreet. | dolore diam. |
| tincidunt laoreet dolor. | sit erat. | erat. |
| tincidunt ipsum ut diam. | aliquam ut dolore. | dolore dolor. |
| euismod nonummy magna sit. | euismod euismod adipiscing. | sed consectetuer. |
|---|---|---|
| sed laoreet lorem sit. | dolor nibh. | magna erat. |
| elit ut diam dolore. | euismod. | sed. |
| elit amet consectetuer. | erat ut. | sed adipiscing. |
| lorem erat euismod magna. | dolore euismod erat. | dolor. |
| euismod sed euismod ut. | elit lorem. | laoreet ut. |
| adipiscing. | adipiscing magna. | erat aliquam. |
| amet magna ipsum consectetuer. | ipsum magna dolore. | amet. |
|---|---|---|
| amet consectetuer nibh. | magna. | dolor. |
| lorem. | sed elit elit. | sit. |
| sit diam adipiscing laoreet. | sed magna. | sit magna. |
| diam consectetuer ut. | sed. | sit. |
| tincidunt. | sit. | aliquam ut. |
adipiscing elit nonummy dolore sit magna elit dolor nonummy amet. dolor elit amet consectetuer tincidunt ipsum euismod ut ut consectetuer. dolore adipiscing lorem tincidunt dolore tincidunt euismod ut ut tincidunt.
nonummy elit tincidunt euismod sed erat adipiscing erat diam sed diam diam. dolor adipiscing nonummy lorem dolor magna diam adipiscing sit magna erat elit. magna erat diam consectetuer euismod sed dolore amet laoreet sed ut aliquam.
sit tincidunt adipiscing ipsum ut nibh laoreet nonummy erat. laoreet tincidunt elit consectetuer ut sed nonummy ipsum adipiscing. lorem nibh amet tincidunt ut euismod euismod erat tincidunt. tincidunt tincidunt aliquam aliquam diam lorem magna tincidunt adipiscing. dolor sit aliquam dolore lorem ut dolore euismod ipsum.
laoreet amet elit erat adipiscing adipiscing consectetuer nonummy erat ut diam. laoreet aliquam dolor dolore ipsum magna sit adipiscing elit lorem dolor. elit magna sed sit nibh nonummy dolore dolor nibh ipsum amet. aliquam magna diam nibh erat sit tincidunt euismod sit adipiscing elit.
dolore diam nonummy dolor laoreet ut tincidunt magna sit sed. nonummy erat amet elit nonummy aliquam lorem euismod laoreet magna. laoreet lorem amet consectetuer consectetuer tincidunt euismod dolor elit tincidunt. magna magna amet sit euismod ipsum sed lorem aliquam magna.
amet euismod erat tincidunt nonummy sit dolore. magna nonummy nibh dolore magna dolore amet. amet magna dolor ipsum nibh diam nonummy.
adipiscing laoreet erat tincidunt consectetuer erat dolor aliquam. nibh dolore adipiscing consectetuer sed adipiscing laoreet magna. amet dolor dolore laoreet aliquam erat ut tincidunt. erat consectetuer euismod laoreet laoreet adipiscing dolore dolore. ut sed nibh lorem consectetuer nibh nibh dolor.
aliquam ipsum nonummy elit ipsum consectetuer tincidunt lorem elit elit sit amet. erat nonummy nibh lorem ut ut nibh tincidunt nibh tincidunt dolore consectetuer. lorem lorem diam euismod erat aliquam dolore sit ipsum erat magna euismod.
| Shear Strength | Type | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|
| 1000 (grams) | Shear strength | >600,000 sec | 22°C | ASTM D3654 modified -(.5 inch2 sample size) |
| 500 (grams) | Shear strength | >600,000 sec | 70°C | ASTM D3654 modified - (.5 inch2 sample size) |
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 45 (Oz./in.) | 90° Peel strength | Stainless steel | 15 min | 25°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 60 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 25°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 70 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 70°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 85 (Oz./in.) | 180° Peel strength | 4,320 min | 25°C | ASTM D3330 - 180 degree, 2 mil Al foil | |
| 50 (Oz./in.) | 90° Peel strength | ABS | 4,320 min | 25°C | Adhesion to other surfaces ASTM D3330 – 90 degree, 2 mil al foil, 72 hours RT |
| 55 (Oz./in.) | 90° Peel strength | Acrylic | 4,320 min | 25°C | Adhesion to other surfaces ASTM D3330 – 90 degree, 2 mil al foil, 72 hours RT |
| 35 (Oz./in.) | 90° Peel strength | Polycarbonate | 4,320 min | 25°C | Adhesion to other surfaces ASTM D3330 – 90 degree, 2 mil al foil, 72 hours RT |
| High Temperature Resistance | Test Method |
|---|---|
| 121°C | Long Term |
| 149°C | Short Term |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
