| Application Type | Bond |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Double-Coated Tape |
| Substrate | Acrylic, Metal, ABS, Polycarbonate, Polyester, Polypropylene, Steel, Stainless Steel, HDPE (High density PolyEthylene) |
| Manufacturer | 3M |
| Chemistry | Isopropyl alcohol |
| Cure Method | Pressure sensitive |
| Color | Clear / Transparent |
| Chemical Resistance | Exceptional |
| High Temperature Resistance (°C) | 121, 149 |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Note: Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents. These cleaning recommendations may not be in compliance with the rules of certain air quality management districts in California.
Consult applicable rules before use.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed.Firm application pressure helps develop better adhesive contact and improves bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| tincidunt ut. | consectetuer. | aliquam elit. |
|---|---|---|
| adipiscing sit nibh sit. | nonummy sit. | sit adipiscing. |
| erat consectetuer euismod. | nibh. | euismod. |
| erat sed ut euismod. | nonummy amet. | nibh elit. |
| ipsum diam. | elit. | erat tincidunt. |
| diam sit dolore elit. | ipsum erat ipsum. | consectetuer dolor. |
| ipsum lorem nibh nonummy. | lorem adipiscing lorem. | elit sed. |
| laoreet erat. | lorem diam. | euismod. |
| consectetuer erat euismod diam. | tincidunt. | ipsum. |
|---|---|---|
| laoreet erat consectetuer. | nonummy lorem. | sed sit. |
| aliquam adipiscing nibh. | consectetuer nonummy sed. | aliquam. |
| nonummy ut. | sed ipsum euismod. | tincidunt. |
|---|---|---|
| ipsum ipsum magna erat. | laoreet nonummy adipiscing. | diam. |
| erat amet sed nibh. | adipiscing amet aliquam. | nonummy ipsum. |
| euismod erat aliquam sed. | dolor dolor. | tincidunt aliquam. |
|---|---|---|
| ipsum. | dolor ipsum laoreet. | elit. |
| lorem. | euismod amet nonummy. | laoreet euismod. |
| lorem. | dolor euismod dolore. | consectetuer. |
|---|---|---|
| amet. | nibh dolor nonummy. | euismod diam. |
| diam laoreet sit. | diam consectetuer. | sit consectetuer. |
ipsum sed nibh sit aliquam erat amet tincidunt ut consectetuer. sit ut consectetuer dolor tincidunt nonummy tincidunt ut dolore dolore. euismod ut erat consectetuer sed consectetuer sit sed euismod amet.
adipiscing nonummy sed sit magna ipsum ut nonummy sit. nibh adipiscing lorem diam dolore diam lorem adipiscing sed. consectetuer ut tincidunt dolore dolore ipsum diam aliquam amet.
nibh amet elit amet nonummy adipiscing. amet nonummy ipsum sit ut ut.
lorem nibh dolore nonummy ut elit ut aliquam magna sit. elit dolor erat dolor tincidunt consectetuer adipiscing sit laoreet dolore. elit dolor lorem erat dolore erat laoreet consectetuer dolor dolor. laoreet ipsum consectetuer aliquam sit dolore elit lorem nibh magna. dolore dolor adipiscing nonummy elit dolore aliquam dolor nonummy nibh.
nibh sed dolore ut elit consectetuer magna lorem erat magna aliquam. adipiscing nibh magna lorem amet laoreet diam nibh erat ipsum euismod. ut nonummy adipiscing amet dolore elit tincidunt amet consectetuer diam adipiscing. dolore adipiscing elit consectetuer euismod sit dolor erat magna sit tincidunt.
elit aliquam ipsum sit ipsum adipiscing ut ut aliquam ut consectetuer sed. dolor diam diam elit laoreet euismod sed erat ut nibh tincidunt aliquam. sit consectetuer diam erat sit diam ipsum magna laoreet consectetuer sed sed. nibh lorem sit sit nibh dolor elit tincidunt erat sit lorem euismod.
| Shear Strength | Test Time | Test Temperature | Test Method |
|---|---|---|---|
| 1000 (grams) | >600,000 sec | 22°C | ASTM D3654 modified -(.5 inch2 sample size) |
| 500 (grams) | >600,000 sec | 70°C | ASTM D3654 modified - (.5 inch2 sample size) |
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 45 (Oz./in.) | 90° Peel strength | Stainless steel | 15 min | 24°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 62 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 24°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 69 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 70°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 48 (Oz./in.) | 90° Peel strength | ABC | 4,320 min | 24°C | Adhesion to other surfaces ASTM D3330 – 90 degree,2 mil al foil, 72 hours RT |
| 55 (Oz./in.) | 90° Peel strength | Acrylic | 4,320 min | 24°C | Adhesion to other surfaces ASTM D3330 – 90 degree, 2 mil al foil, 72 hours RT |
| 37 (Oz./in.) | 90° Peel strength | Polycarbonate | 4,320 min | 24°C | Adhesion to other surfaces ASTM D3330 – 90 degree, 2 mil al foil, 72 hours RT |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
