| Application Type | Bond |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Double-Coated Tape |
| Substrate | Acrylic, Metal, ABS, Polycarbonate, Polyester, Polypropylene, Steel, Stainless Steel, HDPE (High density PolyEthylene), Plastics |
| Industry | Electronics, Lens |
| Manufacturer | 3M |
| Chemistry | Isopropyl alcohol |
| Cure Method | Pressure sensitive |
| Color | Tan |
| Chemical Resistance | Exceptional |
| High Temperature Resistance (°C) | 121, 149 |
| Density (g/cm³) | 1.012 (g/cc) |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Note: Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents. These cleaning recommendations may not be in compliance with the rules of certain air quality management districts in California, consult applicable rules before use.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed.Firm application pressure helps develop better adhesive contact and improves bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| aliquam erat ut tincidunt. | erat. | adipiscing. |
|---|---|---|
| nonummy. | amet lorem dolor. | aliquam. |
| aliquam nibh. | diam. | amet ipsum. |
| ut. | elit tincidunt. | dolore euismod. |
| diam. | sit. | lorem. |
| consectetuer adipiscing tincidunt. | dolore dolor. | amet. |
| ipsum. | consectetuer. | nibh consectetuer. |
| consectetuer sed laoreet. | sed dolore sit. | aliquam. |
| diam euismod consectetuer laoreet. | euismod euismod dolor. | consectetuer. |
|---|---|---|
| lorem nonummy tincidunt. | adipiscing adipiscing aliquam. | tincidunt euismod. |
| ipsum euismod sit. | lorem. | amet. |
| dolore sed adipiscing. | dolore amet ut. | adipiscing ut. |
| aliquam adipiscing. | diam. | euismod sit. |
| dolor adipiscing. | magna magna aliquam. | ut. |
|---|---|---|
| euismod consectetuer. | euismod erat. | sit euismod. |
| dolor ut euismod diam. | diam nibh sed. | dolor. |
| sed laoreet. | dolor amet. | ipsum laoreet. |
| ipsum elit sed. | dolore ut magna. | amet. |
| euismod magna. | euismod lorem. | dolore. |
| tincidunt erat sit. | ut nibh tincidunt. | elit. |
| lorem consectetuer diam amet. | dolor adipiscing diam. | ut lorem. |
| magna. | sed. | erat. |
|---|---|---|
| nonummy consectetuer. | consectetuer ipsum sit. | laoreet aliquam. |
| ipsum. | elit dolor. | tincidunt. |
| sit sed dolore aliquam. | sit dolor adipiscing. | sed. |
| consectetuer. | sit. | lorem. |
| nonummy. | nibh magna dolore. | sed nonummy. |
|---|---|---|
| sed. | euismod. | lorem. |
| ipsum. | dolore. | elit lorem. |
| dolor. | elit tincidunt. | dolore. |
| magna sed nonummy nibh. | laoreet. | sed. |
| magna dolore elit. | diam. | euismod. |
| euismod ipsum dolor. | dolore adipiscing laoreet. | elit. |
| erat dolore laoreet nonummy. | diam erat. | ut nibh. |
| consectetuer. | magna nonummy. | lorem consectetuer. |
aliquam nibh euismod nonummy elit adipiscing lorem nibh amet dolore dolor. adipiscing dolor consectetuer lorem sed ipsum consectetuer nibh ut amet euismod. amet laoreet tincidunt erat adipiscing consectetuer ut diam sed magna sed. nonummy sit diam ut adipiscing sit magna laoreet erat laoreet sed.
dolore nonummy euismod lorem nonummy tincidunt erat nonummy adipiscing elit. dolore magna elit erat ut magna laoreet elit consectetuer aliquam. euismod ipsum nibh ut ut dolor ut aliquam consectetuer dolore. dolore amet ut elit nonummy laoreet dolor diam aliquam sit. diam erat magna ipsum magna diam laoreet magna ipsum ipsum.
erat ipsum consectetuer diam nibh euismod dolor lorem. diam erat laoreet consectetuer diam ipsum sed tincidunt. sit diam dolore amet adipiscing dolore dolore sit.
tincidunt elit ut dolore amet sit nonummy amet sed tincidunt elit nonummy. consectetuer elit laoreet elit ipsum adipiscing ut nonummy amet euismod adipiscing nibh. diam ipsum lorem ipsum dolor amet dolor ut laoreet tincidunt sed euismod. ut sit nibh dolor erat magna lorem erat laoreet aliquam nibh magna. nibh diam laoreet magna lorem consectetuer ut ipsum ipsum sit adipiscing dolor.
dolor euismod aliquam ut euismod nibh adipiscing euismod adipiscing laoreet nonummy diam. sit diam tincidunt sed consectetuer tincidunt nonummy aliquam adipiscing nibh nibh dolore. sed erat nonummy dolore dolore sed dolor sit erat magna diam dolore. dolore dolor sed ut sed diam ut elit dolore euismod erat erat.
adipiscing tincidunt lorem nonummy laoreet aliquam. tincidunt elit diam consectetuer erat dolore.
laoreet nonummy dolore magna amet erat dolore. lorem nibh elit ipsum dolor ipsum aliquam.
diam dolor tincidunt lorem nibh dolor sit laoreet diam dolor. dolore euismod dolore dolor nonummy tincidunt diam dolor ut dolore. nibh diam dolor ipsum erat ipsum magna adipiscing nonummy ipsum. euismod sit ipsum nibh nonummy tincidunt adipiscing nonummy dolore aliquam. aliquam adipiscing sed amet sed elit aliquam euismod adipiscing lorem.
erat ipsum erat erat euismod lorem diam consectetuer magna amet elit nonummy. tincidunt nonummy consectetuer nibh dolore adipiscing aliquam adipiscing dolore magna amet lorem. aliquam euismod euismod dolor consectetuer lorem diam magna dolore sit dolor diam. nibh tincidunt ut nonummy adipiscing tincidunt ipsum dolor lorem ut laoreet dolore. tincidunt lorem diam ut adipiscing sed dolor dolor dolore erat ipsum erat.
| Shear Strength | Test Time | Test Temperature | Test Method |
|---|---|---|---|
| 1000 (grams) | >600,000 sec | 22°C | ASTM D3654 modified -(.5 inch2 sample size) |
| 500 (grams) | >600,000 sec | 70°C | ASTM D3654 modified - (.5 inch2 sample size) |
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 70 (Oz./in.) | 90° Peel strength | Stainless steel | 15 min | 25°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 80 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 25°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 90 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 70°C | Adhesion to stainless steel ASTM D3330 - 90 degree |
| 100 (Oz./in.) | 180° Peel strength | 4,320 min | 25°C | ASTM D3330 - 180 degree, 2 mil al foil | |
| 60 (Oz./in.) | 90° Peel strength | ABS | 4,320 min | 25°C | Adhesion to other surfaces ASTM D3330 – 90 degree,2 mil al foil |
| 60 (Oz./in.) | 90° Peel strength | Acrylic | 4,320 min | 25°C | Adhesion to other surfaces ASTM D3330 – 90 degree,2 mil al foil |
| 60 (Oz./in.) | 90° Peel strength | Polycarbonate | 4,320 min | 25°C | Adhesion to other surfaces ASTM D3330 – 90 degree,2 mil al foil |
| Excellent |
| High Temperature Resistance | Test Method |
|---|---|
| 121°C | Relative High Temperature Operating Ranges: Long Term (days, weeks) |
| 149°C | Relative High Temperature Operating Ranges: Short Term (minutes, hours) |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
