Application Type Bond 1 Part or 2 Part 1 Part Material Form Thick red tinted adhesive transfer tape Substrate Paper, Steel Manufacturer 3M Chemistry Acrylic Cure Method Pressure Sensitive Color Light red Relative Solvent Resistance Chemical Resistance: Good High Temperature Resistance (°C) Good high temperature resistance, 121, 177
Technical Data for 3M 9497 High Temperature Adhesive Transfer Tape-2 mil
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Tape - Thick red tinted adhesive transfer tape
- Other - Many paper medians used by corrugators
- Pressure Sensitive (min) - Pressure Sensitive
- Red - Light red
Application Temperature (°F) 70 to 100
General Bond Strength (psi) 45 (oz./in.) Test Method
UV Resistance Excellent High Temperature Resistance (°C) Good high temperature resistance, 121, 177
Shelf Life Details Storage: Store in original cartons at 70°F (21°C) and 50% relative humidity., 24 months from date of manufacture Shelf Life Temperature (°F) 70 Shelf Life Type From date of manufacture. Shelf Life (mon) 24
Best Practices for 3M 9497 High Temperature Adhesive Transfer Tape-2 mil
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
Comparable Materials for 3M 9497 High Temperature Adhesive Transfer Tape-2 mil
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.