-
Description for 3M 9576R
• Splicing Tape • Used in the printing industry • can be used through ovens up to 450°F if dwell times are ten seconds or less • Red carrier.Application Type Bond 1 Part or 2 Part 1-Part Material Form Tape Substrate Paper, Polypropylene, Steel Industry Core, Splicing Tapes Manufacturer 3M Chemistry Acrylic Cure Method Pressure Sensitive Application Temperature (°F) 70 to 100 Color Red High Temperature Resistance (°C) 50, 75 -
Technical Data for 3M 9576R
Overview
-
Application Type
- Adhesive - Bond
-
1 Part or 2 Part
- 1-Part
-
Material Form
- Tape
-
Substrate
-
Industry
- Electronics - Core
- Industrial - Flying splice
- Splicing - Splicing Tapes
- Packaging - Print
-
Chemistry
-
Application Method
- Contact
- Flow - Flow equipment, Pumping
-
Cure Method
- Pressure Sensitive (min) - Pressure Sensitive
-
Color
- Red
Specifications
Cure Specs
Application Temperature (°F) 70 to 100 Bond Strength
Peel Strength (piw) 30 (Oz./in.) Test Method Material Resistance
High Temperature Resistance (°C) 50, 75 Test Method Business Information
Shelf Life Details Store in original cartons at 70°F (21°C) and 50% relative humidity;If stored under proper conditions, product retains its performance and properties for two years from date of manufacture.. Shelf Life Temperature (°F) 70 Shelf Life Type from date of manufacture Shelf Life (mon) 24 -
-
Best Practices for 3M 9576R
-
Surface Preparation
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Note: Carefully read and follow the manufacturer’s precautions and directions for use when using solvents.
-
Application
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
-
-
Comparable Materials for 3M 9576R
Spec Engine® Results
-
VHB Tape 4646(3M)• Dark gray • Interior bonding applications • Exterior bonding applications • Replace spot welds • Excellent solvent resistance. • Replace liquid adhesives • Replace rivets • High temperature resistance • UL 746C • Excellent durability.
-
4951(3M)
White, closed-cell acrylic foam carrier • Apply as low as 32°F (0°C)
-
4932(3M)
White, closed-cell acrylic foam carrier • Good adhesion to polypropylene and many powder paints• Apply as low as 50°F (10°C)
- Compare All
-
Popular Articles
Plastic Bonding Considerations Q&A
Read Article
What Projects Require Custom Adhesive Formulations and Why?
Read Article
Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read Article
Testing the effectiveness of surface treatments
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read Article
Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read Article
Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read Article
Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads
Peel Strength Test Methods
| Peel Strength | Type | Substrate | Test Method |
|---|---|---|---|
| 30 (Oz./in.) | 180° Peel strength | Steel | ASTM D3330 |
High Temperature Resistance Test Methods
| High Temperature Resistance | Test Method |
|---|---|
| 50°C | Relative High Temperature Operating Ranges: Long Term (days, weeks) |
| 75°C | Relative High Temperature Operating Ranges: Short Term (minutes, hours) |
