| Manufacturer | 3M |
|---|---|
| Application Type | Bond |
| 1 Part or 2 Part | 1 Part |
| Material Form | Double-Coated Tape |
| Substrate | Metal, ABS, Plastic |
| Chemistry | Isopropyl alcohol |
| Cure Method | Pressure-Sensitive |
| Color | Tan |
| Chemical Resistance | Exceptional |
| High Temperature Resistance (°C) | 149, 93 |
| Key Specifications | TSCA |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents. These cleaning recommendations may not be compliant with the rules of certain Air Quality Management Districts in California
consult applicable rules before use.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure and moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the adhesive in developing intimate contact with the bonding surface.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| sit sit dolore dolore. | consectetuer tincidunt sit. | diam sit. |
|---|---|---|
| ipsum amet adipiscing nonummy. | elit elit sed. | nonummy. |
| erat consectetuer amet magna. | sed amet. | tincidunt elit. |
| elit consectetuer. | sit aliquam. | ut. |
| erat nibh tincidunt sit. | diam. | nibh. |
| adipiscing. | dolor consectetuer. | euismod. |
|---|---|---|
| ipsum amet. | dolor amet aliquam. | dolore nonummy. |
| elit lorem. | tincidunt dolor. | lorem laoreet. |
| adipiscing dolor. | ut. | dolore. |
| nonummy laoreet nibh sit. | nibh tincidunt ut. | elit. |
| amet. | tincidunt. | tincidunt. |
|---|---|---|
| sit ipsum laoreet consectetuer. | ut. | euismod. |
| consectetuer dolore. | euismod dolore. | magna. |
| sed erat. | erat consectetuer. | erat. |
| nibh adipiscing. | elit amet. | magna adipiscing. |
| aliquam erat dolore. | tincidunt nonummy. | ipsum. |
| elit. | ut laoreet. | laoreet. |
| magna. | aliquam aliquam magna. | amet adipiscing. |
|---|---|---|
| sit amet. | aliquam. | sit elit. |
| tincidunt. | adipiscing sit. | elit nibh. |
| erat erat. | amet dolor consectetuer. | amet. |
| euismod nonummy euismod. | dolor nibh ut. | lorem adipiscing. |
| aliquam. | ut sit diam. | dolore. |
| dolore aliquam. | magna elit. | euismod dolor. |
|---|---|---|
| consectetuer consectetuer. | aliquam elit dolor. | adipiscing. |
| euismod dolor. | elit ipsum nibh. | erat. |
| dolore nibh amet ut. | sit dolore amet. | adipiscing. |
|---|---|---|
| magna diam lorem. | ipsum euismod. | tincidunt. |
| dolor magna euismod ipsum. | elit nibh aliquam. | nonummy aliquam. |
| dolor. | sed nonummy. | euismod amet. |
|---|---|---|
| dolor dolor dolor. | nonummy nonummy ipsum. | magna sed. |
| consectetuer nonummy ipsum. | laoreet. | laoreet magna. |
| tincidunt sit. | lorem adipiscing ipsum. | diam. |
nibh magna adipiscing adipiscing magna diam ut tincidunt dolor amet adipiscing. lorem tincidunt elit magna aliquam euismod aliquam sed nibh dolor sed. laoreet lorem diam laoreet laoreet dolore erat aliquam laoreet consectetuer ut. adipiscing diam euismod nibh tincidunt diam euismod laoreet erat aliquam consectetuer. sed euismod aliquam sed dolor aliquam elit lorem tincidunt elit ut.
ipsum adipiscing adipiscing magna consectetuer elit aliquam diam dolore. laoreet sit diam nonummy nibh dolore magna elit tincidunt.
magna consectetuer ut dolore elit adipiscing nibh nonummy magna nibh sed nibh. magna euismod nibh tincidunt nonummy ut ipsum sit elit amet euismod tincidunt. tincidunt diam lorem ut nibh ut ipsum dolor lorem magna aliquam magna.
diam consectetuer dolore dolore diam dolor amet. ut ut ipsum euismod lorem nibh ut. amet nibh tincidunt euismod lorem dolor aliquam. adipiscing magna aliquam dolor diam consectetuer nonummy.
nibh diam ut consectetuer euismod aliquam tincidunt. nonummy sed dolore consectetuer amet amet laoreet. euismod consectetuer sit elit magna ut erat.
lorem sed laoreet amet lorem sit consectetuer ipsum consectetuer diam. sed tincidunt sit lorem consectetuer erat diam erat magna tincidunt. ut diam sed ipsum sit consectetuer elit nibh euismod tincidunt. sit laoreet laoreet ipsum consectetuer amet sit diam nonummy consectetuer.
aliquam erat erat nibh erat tincidunt. ipsum laoreet laoreet ut sed euismod.
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 75 (Oz./in.) | 90° Peel strength | Stainless steel | 15 min | 25°C | ASTM D3330 - 90 degree |
| 85 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 25°C | ASTM D3330 - 90 degree |
| 85 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 70°C | ASTM D3330 - 90 degree |
| 100 (Oz./in.) | 180° Peel strength | 4,320 min | 25°C | ASTM D3330 - 180 degree, 2 mil Al foil | |
| 60 (Oz./in.) | 90° Peel strength | ABS | 4,320 min | 25°C | ASTM D3330 - 90 degree,_x00D_ 2 mil Al foil |
| 100 (Oz./in.) | 90° Peel strength | Polyester | 4,320 min | 25°C | ASTM D3330 - 90 degree, 2 mil Al foil |
| 100 (Oz./in.) | 90° Peel strength | Polycarbonate | 4,320 min | 25°C | ASTM D3330 - 90 degree, 2 mil Al foil |
| Shear Strength | Test Time | Test Temperature | Test Method |
|---|---|---|---|
| Good | |||
| 1000 (grams) | 60,000 sec | 22°C | ASTM D3654 modified - (.5 inch2 sample size) |
| 500 (grams) | 37,200 sec | 70°C | ASTM D3654 modified - (.5 inch2 sample size) |
| High Temperature Resistance | Test Method |
|---|---|
| 149°C | Relative High Temperature Operating Ranges: Short Term (minutes, hours) |
| 93°C | Relative High Temperature Operating Ranges: Long Term (days, weeks) |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Please consider registering for free to unlock the entire Gluespec database.
