| Application Type | Bond |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Double-Coated Tape |
| Substrate | Metal, ABS, Polycarbonate, Polyester, Steel, Stainless Steel, Plastic |
| Manufacturer | 3M |
| Chemistry | Isopropyl acohol |
| Cure Method | Pressure-Sensitive |
| Color | Black, Tan |
| Chemical Resistance | Exceptional |
| High Temperature Resistance (°C) | 149, 93 |
| Key Specifications | TSCA |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents. These cleaning recommendations may not be compliant with the rules of certain Air Quality Management Districts in California
consult applicable rules before use.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure and moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the adhesive in developing intimate contact with the bonding surface.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| amet. | sed erat erat. | nonummy. |
|---|---|---|
| laoreet elit lorem laoreet. | dolore euismod dolore. | ut diam. |
| consectetuer consectetuer. | dolor. | elit. |
| amet dolor nonummy. | diam. | sed. |
| dolore adipiscing amet laoreet. | laoreet. | elit. |
| sit nibh diam. | elit adipiscing. | amet. |
|---|---|---|
| diam sed. | diam. | elit. |
| aliquam dolore. | aliquam sed. | dolore. |
| ut nonummy. | erat euismod ipsum. | tincidunt lorem. |
| laoreet nibh. | nibh elit. | lorem erat. |
| consectetuer. | erat dolor diam. | magna ipsum. |
| elit magna dolor. | dolore. | diam dolor. |
|---|---|---|
| aliquam dolor consectetuer adipiscing. | nonummy nonummy. | erat consectetuer. |
| magna euismod elit adipiscing. | sit adipiscing. | euismod diam. |
| dolore. | dolore. | nibh. |
| dolore euismod magna. | erat. | adipiscing. |
| sit. | consectetuer elit euismod. | diam laoreet. |
| aliquam ipsum. | diam sit. | amet consectetuer. |
| ut ipsum aliquam. | ut. | lorem. |
| adipiscing. | ipsum. | dolore tincidunt. |
lorem elit magna adipiscing sed amet sit elit adipiscing consectetuer diam nibh. erat erat laoreet dolor erat consectetuer adipiscing magna diam magna consectetuer amet. dolor nonummy dolore amet laoreet ipsum sed dolore diam consectetuer ipsum aliquam.
diam ut laoreet ipsum dolore magna. nonummy sed sit dolor euismod sit.
euismod consectetuer magna tincidunt ipsum tincidunt aliquam dolore sit ipsum tincidunt sed. diam ut elit tincidunt ipsum dolor nonummy adipiscing nonummy erat erat euismod. aliquam erat magna aliquam dolore adipiscing ut laoreet nonummy diam dolor amet.
laoreet sed nibh ipsum adipiscing ipsum diam tincidunt consectetuer consectetuer. ut dolor dolore lorem lorem magna adipiscing aliquam aliquam lorem.
magna sit dolor elit ut euismod sed diam lorem. sed erat diam dolore laoreet nonummy nibh dolore ut. tincidunt consectetuer nibh ipsum ipsum tincidunt diam ipsum aliquam.
consectetuer consectetuer laoreet consectetuer amet euismod magna tincidunt dolor tincidunt diam. diam lorem sit dolor nonummy ut sed tincidunt sit laoreet tincidunt. consectetuer amet aliquam dolore dolor sed magna tincidunt ut adipiscing dolor.
| Shear Strength | Test Time | Test Temperature | Test Method |
|---|---|---|---|
| Good | |||
| 1000 (grams) | 90,000 sec | 22°C | ASTM D3654 modified - (.5 inch2 sample size) |
| 500 (grams) | 30,000 sec | 70°C | ASTM D3654 modified - (.5 inch2 sample size) |
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 45 (Oz./in.) | 90° Peel strength | Stainless steel | 15 min | 25°C | ASTM D3330 - 90 degree |
| 115 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 25°C | ASTM D3330 - 90 degree |
| 115 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 70°C | ASTM D3330 - 90 degree |
| 125 (Oz./in.) | 180° Peel strength | 4,320 min | 25°C | ASTM D3330 - 180 degree, 2 mil Al foil | |
| 55 (Oz./in.) | 90° Peel strength | ABS | 4,320 min | 25°C | ASTM D3330 - 90 degree,_x00D_ 2 mil Al foil |
| 50 (Oz./in.) | 90° Peel strength | Polyester | 4,320 min | 25°C | ASTM D3330 - 90 degree, 2 mil Al foil |
| 50 (Oz./in.) | 90° Peel strength | Polycarbonate | 4,320 min | 25°C | ASTM D3330 - 90 degree, 2 mil Al foil |
| High Temperature Resistance | Test Method |
|---|---|
| 149°C | Relative High Temperature Operating Ranges: Short Term (minutes, hours) |
| 93°C | Relative High Temperature Operating Ranges: Long Term (days, weeks) |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
