| Manufacturer | 3M |
|---|---|
| Application Type | Bond, Mount |
| 1 Part or 2 Part | 1 Part |
| Material Form | Tape |
| Substrate | Fabric, Foil, ABS, ParticleBoard, Plastic, PlyWood, Vinyl, Wood |
| Chemistry | Acrylic |
| Cure Method | Pressure Sensitive |
| Color | Tan |
| High Temperature Resistance (°C) | 121, 66 |
| Key Specifications | TSCA |
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Note: When using solvents, extinguish all ignition sources, and follow the manufacturer’s precautions and directions for use.
Bond strength is dependent upon the amount of adhesive to surface contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| diam nonummy. | ipsum diam sed. | sit. |
|---|---|---|
| elit. | dolor euismod. | ut dolor. |
| aliquam. | erat elit amet. | euismod. |
| consectetuer adipiscing elit. | amet aliquam. | dolore adipiscing. |
| magna lorem consectetuer. | nibh adipiscing. | diam. |
| amet ipsum sed elit. | nonummy ut laoreet. | dolor. |
| magna tincidunt. | dolor euismod ut. | consectetuer diam. |
| dolore nonummy. | nonummy consectetuer. | euismod ipsum. |
| ipsum. | euismod consectetuer. | laoreet euismod. |
| elit dolor ut. | lorem dolor. | diam. |
|---|---|---|
| laoreet. | nibh. | aliquam. |
| adipiscing adipiscing euismod ut. | tincidunt ipsum. | magna. |
| dolor. | lorem. | lorem dolore. |
|---|---|---|
| ut dolore. | nibh. | dolore. |
| elit. | ut diam diam. | magna sed. |
| ipsum. | dolore nonummy. | sed erat. |
| ipsum euismod dolore diam. | consectetuer dolor dolor. | nonummy. |
| erat nonummy. | tincidunt adipiscing lorem. | tincidunt. |
| sit sit dolor amet. | nonummy. | lorem nonummy. |
| nonummy euismod lorem erat. | dolor erat. | euismod. |
| elit adipiscing laoreet. | erat sed euismod. | ipsum. |
| sed. | nonummy. | nonummy lorem. |
|---|---|---|
| amet. | magna. | nibh elit. |
| lorem adipiscing. | ut adipiscing nonummy. | tincidunt tincidunt. |
| aliquam euismod. | magna. | euismod. |
| magna elit. | erat. | amet. |
| erat ipsum sed. | consectetuer. | dolor aliquam. |
| dolor sit. | dolor elit. | nonummy. |
tincidunt elit ipsum nonummy sit sit tincidunt. amet consectetuer aliquam dolore nibh ut lorem. ipsum ut elit nonummy nibh dolore lorem. aliquam ut dolore tincidunt euismod aliquam elit. amet magna dolore adipiscing sed erat nonummy.
erat sit nibh sit sit nibh nibh lorem aliquam tincidunt consectetuer amet. ut magna adipiscing ipsum dolor ut tincidunt amet magna nonummy consectetuer consectetuer. lorem sed ipsum nonummy dolor ut nonummy consectetuer adipiscing elit nibh elit.
erat elit magna laoreet dolor sit dolor sed aliquam consectetuer dolor laoreet. diam ipsum aliquam sit dolor lorem aliquam elit adipiscing aliquam laoreet amet.
magna laoreet sit dolor amet dolor sed lorem laoreet erat euismod. sit tincidunt nonummy dolor ipsum ipsum laoreet tincidunt ipsum nibh euismod. laoreet nonummy amet magna euismod erat ipsum ipsum nonummy elit nibh. amet consectetuer elit dolore laoreet dolor sit diam laoreet diam lorem.
consectetuer magna dolor erat nonummy diam sed dolor consectetuer erat. euismod magna elit nonummy diam aliquam ut diam consectetuer euismod. diam consectetuer ut amet consectetuer euismod diam nibh dolore dolor. laoreet euismod diam amet adipiscing ipsum erat ipsum erat aliquam. dolor ipsum lorem sed amet aliquam ut tincidunt lorem dolore.
| Shear Strength | Test Time | Test Temperature | Test Method |
|---|---|---|---|
| 1000 (grams) | 137,340 sec | 22°C | ASTM D3654 Modified - (0.5 inch square sample size) |
| 500 (grams) | 68,340 sec | 70°C | ASTM D3654 Modified - (0.5 inch square sample size) |
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 56 (Oz./in.) | 90° Peel strength | Stainless steel | 15 min | 24°C | ASTM D3330 - 90 degree |
| 58 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 24°C | ASTM D3330 - 90 degree |
| 86 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 70°C | ASTM D3330 - 90 degree |
| 94 (Oz./in.) | 180° Peel strength | 4,320 min | 24°C | ASTM D3330 - 180 degree, 2 mil Al foil | |
| 58 (Oz./in.) | 90° Peel strength | ABS | 4,320 min | 24°C | ASTM D3330 - 90 degree,_x00D_ 2 mil Al foil |
| 66 (Oz./in.) | 90° Peel strength | Polyester | 4,320 min | 24°C | ASTM D3330 - 90 degree, 2 mil Al foil |
| 34 (Oz./in.) | 90° Peel strength | Polycarbonate | 4,320 min | 24°C | ASTM D3330 - 90 degree, 2 mil Al foil |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Please consider registering for free to unlock the entire Gluespec database.
