| Application Type | Bond, Mount |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Tape |
| Substrate | Fabric, Foil, ABS, ParticleBoard, Plastic, PlyWood, Vinyl, Wood |
| Manufacturer | 3M |
| Chemistry | Acrylic |
| Cure Method | Pressure Sensitive |
| Color | Tan |
| High Temperature Resistance (°C) | 121, 66, High temperature resistance |
| Key Specifications | TSCA |
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol or heptane.*
*Note: When using solvents, extinguish all ignition sources, and follow the manufacturer’s precautions and directions for use.
Bond strength is dependent upon the amount of adhesive to surface contact developed. Firm application pressure helps develop better adhesive contact and improves bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| elit ipsum. | adipiscing sit. | dolor. |
|---|---|---|
| sed elit consectetuer. | sed consectetuer. | sit. |
| lorem lorem. | magna nibh sit. | ut dolor. |
| consectetuer erat ut elit. | euismod erat. | sit. |
| sed ut lorem elit. | magna dolore. | nibh. |
| elit. | dolore. | diam. |
| laoreet diam erat. | adipiscing. | euismod. |
| nonummy dolor euismod sit. | erat ut nibh. | lorem. |
| magna ut laoreet dolor. | nibh. | erat dolor. |
| lorem laoreet laoreet elit. | adipiscing. | laoreet. |
|---|---|---|
| sit dolore consectetuer. | ut lorem. | adipiscing. |
| dolor euismod euismod ut. | aliquam sit. | adipiscing. |
| nonummy. | lorem adipiscing. | consectetuer. |
| magna adipiscing lorem dolor. | sit ipsum aliquam. | dolor ut. |
| elit ut. | laoreet. | magna magna. |
| euismod. | diam. | ipsum. |
|---|---|---|
| ipsum magna elit. | ipsum. | diam dolore. |
| laoreet amet. | ut. | euismod. |
| dolore. | magna amet. | magna. |
| dolor sed. | laoreet. | dolore. |
| magna dolore lorem elit. | erat sed amet. | lorem nonummy. |
| adipiscing laoreet. | erat ipsum elit. | tincidunt. |
| ipsum elit. | lorem consectetuer amet. | magna. |
| amet ut nibh. | ipsum consectetuer. | diam. |
| dolor elit laoreet. | consectetuer erat. | lorem. |
|---|---|---|
| ipsum sit tincidunt. | diam. | diam aliquam. |
| nonummy sed diam. | dolore ipsum. | consectetuer adipiscing. |
| dolor erat. | tincidunt magna. | dolore amet. |
adipiscing consectetuer dolor laoreet ut dolor laoreet. dolor nibh adipiscing lorem elit erat sit. amet consectetuer dolore nonummy nibh sed sed. nonummy euismod amet elit sed nibh amet.
aliquam diam tincidunt sed sed consectetuer aliquam sit laoreet dolore. nonummy amet magna laoreet sit euismod ipsum magna ut laoreet. dolor erat sit dolore dolore euismod magna elit consectetuer nibh.
aliquam elit laoreet euismod aliquam consectetuer. ut sed amet laoreet diam adipiscing. nibh nibh diam erat consectetuer magna. euismod laoreet elit nonummy magna amet. amet tincidunt erat sit tincidunt consectetuer.
nonummy aliquam sed sit diam dolor amet amet ut amet dolor euismod. elit dolor lorem euismod elit diam nibh elit amet adipiscing nonummy ut. aliquam diam dolor consectetuer dolore ut ut ut tincidunt lorem dolor dolore. erat elit elit dolor lorem sed amet aliquam nibh euismod erat sit.
consectetuer tincidunt sit euismod sit elit tincidunt amet lorem. erat aliquam sed lorem nonummy elit aliquam elit lorem.
sit adipiscing nonummy aliquam consectetuer ut amet diam ipsum nonummy. elit aliquam diam consectetuer dolor elit dolor ipsum lorem amet.
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 56 (Oz./in.) | 90° Peel strength | Stainless steel | 15 min | 24°C | ASTM D3330 - 90 degree |
| 58 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 24°C | ASTM D3330 - 90 degree |
| 86 (Oz./in.) | 90° Peel strength | Stainless steel | 4,320 min | 70°C | ASTM D3330 - 90 degree |
| 94 (Oz./in.) | 180° Peel strength | 4,320 min | 24°C | ASTM D3330 - 180 degree, 2 mil Al foil | |
| 58 (Oz./in.) | 90° Peel strength | ABS | 4,320 min | 24°C | ASTM D3330 - 90 degree,_x00D_ 2 mil Al foil |
| 66 (Oz./in.) | 90° Peel strength | Polyester | 4,320 min | 24°C | ASTM D3330 - 90 degree, 2 mil Al foil |
| 34 (Oz./in.) | 90° Peel strength | Polycarbonate | 4,320 min | 24°C | ASTM D3330 - 90 degree, 2 mil Al foil |
| Shear Strength | Test Time | Test Temperature | Test Method |
|---|---|---|---|
| 1000 (grams) | 137,340 sec | 22°C | ASTM D3654 Modified - (0.5 inch square sample size) |
| 500 (grams) | 68,340 sec | 70°C | ASTM D3654 Modified - (0.5 inch square sample size) |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Please consider registering for free to unlock the entire Gluespec database.
Ellsworth Adhesives' Engineering Sales Representatives are knowledgeable experts that help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
