• Description for 3M CA100

    High peel and impact strength • High thermal shock and heat resistance

    *See Terms of Use Below

    Application Type Bond, Adhesive: Instant Adhesives
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate Aluminum- Etched, Metals, Plastics, Many rubbers, Steel
    Manufacturer 3M
    Chemistry Cyanoacrylate, Ethyl
    Cure Method Moisture
    Cure Temperature (°C) 20 to 25
    Viscosity (cPs) High, 2,500 to 4,500 Uncured, <3,000
    Color Clear, Colorless
    High Temperature Resistance (°C) 82, High thermal shock resistance
    Low Temperature Resistance (°C) -54
    Density (g/cm³) 8.7 (weight (lbs/gal))
    Key Specifications CID (United States Government Commercial Item Description): A-A-3097: Type II, Class 3
  • Technical Data for 3M CA100

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1 Part or 2 Part - 1 Part
    • Material Form
      • Liquid
    • Substrate
    • Chemistry
    • Application Method
      • Dispenser - Lamination equipment
    • Cure Method
      • Moisture / Condensation Cure - Moisture
    • Color
      • Clear / Transparent - Clear, Colorless
    • Key Specifications
      • CID (United States Government Commercial Item Description): A-A-3097: Type II, Class 3
    Specifications
    Cure Specs
    Cure Temperature (°C) 20 to 25 Test Method
    Cure Time (min) Test Method
    Viscosity (cPs) High, 2,500 to 4,500 Uncured, <3,000 Test Method
    Fixture or Handling Strength Time (min) 0.33 to 1.17 Test Method
    Bond Strength
    General Bond Strength (psi) High
    Peel Strength (piw) High
    Shear Strength (psi) 2,000, 2,900, 600, 700 Test Method
    Impact Strength (psi) High
    Material Resistance
    High Temperature Resistance (°C) 82, High thermal shock resistance Test Method
    Impact Resistance High
    Low Temperature Resistance (°C) -54 Test Method
    Other Properties
    Specific Gravity 1.050 Test Method
    Density (g/cm³) 8.7 (weight (lbs/gal)) Test Method
    Business Information
    Shelf Life Details Store in original containers at or below 80°F (27°C).;These products can be expected to have at least nine months shelf life. At lower temperature, the shelf life will be longer. Lower temperatures cause increased viscosity of a temporary nature and also will cause water to condense on the container. Therefore, containers stored at low temperatures should be allowed to return to room temperature before opening so that water does not come in contact with the adhesive and cause adhesive gelation.
    Shelf Life Temperature (°F) <81
    Shelf Life (mon) >9
  • Best Practices for 3M CA100

    *See Terms of Use Below

    1. Surface Preparation

      For optimum strength structural bonds, paint, oxide films, oils, dust, mold release agents and all other surface contaminants must be completely removed. However, the amount of surface preparation depends on the required bond strength and the environmental aging resistance desired by the user.

      See Vendor Technical Data sheet for more information

  • Comparable Materials for 3M CA100

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. 69ccd05b-2c7e-44d1-8677-bf6bcc4315a4
  2. 69ccd05b-2c7e-44d1-8677-bf6bcc4315a4

Popular Articles

Cyanoacrylate 101

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Cyanoacrylate 202

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
20 to 25°C
Cure Time Test Methods
Cure Time Test Method
Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time Fixture-Handling Strength Test Method
0.33 to 1.17 min Cured
Viscosity Test Methods
Viscosity Test Method
High
2,500 to 4,500 cPs Uncured Uncured
<3,000 cPs
Shear Strength Test Methods
Shear Strength Type Cure Time Cure Temperature Cure Humidity Substrate Test Temperature Test Method
2,000 psi Overlap shear strength 2,880 min 20°C 60 % Steel 23°C Overlap Shear Metal to Metal Bond Strength tested @ 75°F (23°C), Tensile Shear Strength (as defined in ASTM-D-1002) - cured 48 hours at 68°F (20°C) - 60% Relative Humidity - abraded and acetone wiped - test specimen is 1/2 sq. in. bond tested @ .1 in./minute loading rate.
2,900 psi Overlap shear strength 2,880 min 20°C 60 % Aluminum-etched 23°C Overlap Shear Metal to Metal Bond Strength tested @ 75°F (23°C), Tensile Shear Strength (as defined in ASTM-D-1002) - cured 48 hours at 68°F (20°C) - 60% Relative Humidity - abraded and acetone wiped - test specimen is 1/2 sq. in. bond tested @ .1 in./minute loading rate.
600 psi Overlap shear strength 2,880 min 20°C 60 % ABS (Substrate Failure) 23°C Overlap Shear Metal to Metal Bond Strength tested @ 75°F (23°C), Substrate Failure, Tensile Shear Strength (as defined in ASTM-D-1002) - cured 48 hours at 68°F (20°C) - 60% Relative Humidity - abraded and acetone wiped - test specimen is 1/2 sq. in. bond tested @ .1 in./minute loading rate.
700 psi Overlap shear strength 2,880 min 20°C 60 % PVC (Substrate Failure) 23°C Overlap Shear Metal to Metal Bond Strength tested @ 75°F (23°C), Substrate Failure, Tensile Shear Strength (as defined in ASTM-D-1002) - cured 48 hours at 68°F (20°C) - 60% Relative Humidity - abraded and acetone wiped - test specimen is 1/2 sq. in. bond tested @ .1 in./minute loading rate.
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
82°C Uncured
High thermal shock resistance
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-54°C Uncured
Density Test Methods
Density Test Method
8.7 (weight (lbs/gal)) Uncured
Specific Gravity Test Methods
Specific Gravity Test Method
1.050 Uncured