• Description for 3M CA5

    Higher viscosity, slower setting version ethyl of CA4 for filling gaps • Meets CID A-A-3097, Type II, Class 3

    *See Terms of Use Below

    Application Type Bond, Adhesive: Instant Adhesives
    1 Part or 2 Part 1 Part
    Material Form Liquid
    Substrate Aluminum- Etched, Metal, Plastic, Rubber, Steel
    Manufacturer 3M
    Chemistry Cyanoacrylate, Ethyl
    Cure Method Moisture
    Cure Temperature (°C) 20 to 25 Room temperature
    Viscosity (cPs) High, 2,000
    Color Clear, Colorless
    High Temperature Resistance (°C) 82
    Low Temperature Resistance (°C) -54
    Density (g/cm³) 8.7 (weight (lbs/gal))
    Key Specifications CID (United States Government Commercial Item Description): A-A-3097: Type II, Class 3

Popular Articles

Cyanoacrylate 202

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Cyanoacrylate 101

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Cure Temperature Test Methods
Cure Temperature Cure Time Test Method
20 to 25°C Room temperature
Fixture or Handling Strength Time Test Methods
Fixture or Handling Strength Time Fixture-Handling Strength Test Method
0.20 to 1.00 min Uncured
Viscosity Test Methods
Viscosity Test Method
High Where some gap filling is desired for bonding rough or uneven surfaces.
2,000 cPs Uncured
Cure Time Test Methods
Cure Time Test Method
Shear Strength Test Methods
Shear Strength Type Cure Time Cure Temperature Cure Humidity Substrate Test Temperature Test Method
2,500 psi Overlap shear strength 2,880 min 20°C 60 % Steel 23°C Overlap Shear Metal to Metal Bond Strength tested @ 75°F (23°C), Tensile Shear Strength (as defined in ASTM-D-1002) - cured 48 hours at 68°F (20°C) - 60% Relative Humidity - abraded and acetone wiped - test specimen is 1/2 sq. in. bond tested @ .1 in./minute loading rate.
600 psi Overlap shear strength 2,880 min 20°C 60 % Aluminum-etched 23°C Overlap Shear Metal to Metal Bond Strength tested @ 75°F (23°C), Tensile Shear Strength (as defined in ASTM-D-1002) - cured 48 hours at 68°F (20°C) - 60% Relative Humidity - abraded and acetone wiped - test specimen is 1/2 sq. in. bond tested @ .1 in./minute loading rate.
800 psi Overlap shear strength 2,880 min 20°C 60 % ABS (Substrate failure) 23°C Overlap Shear Metal to Metal Bond Strength tested @ 75°F (23°C), Substrate Failure, Tensile Shear Strength (as defined in ASTM-D-1002) - cured 48 hours at 68°F (20°C) - 60% Relative Humidity - abraded and acetone wiped - test specimen is 1/2 sq. in. bond tested @ .1 in./minute loading rate.
800 psi Overlap shear strength 2,880 min 20°C 60 % PVC (Substrate failure) 23°C Overlap Shear Metal to Metal Bond Strength tested @ 75°F (23°C), Substrate Failure, Tensile Shear Strength (as defined in ASTM-D-1002) - cured 48 hours at 68°F (20°C) - 60% Relative Humidity - abraded and acetone wiped - test specimen is 1/2 sq. in. bond tested @ .1 in./minute loading rate.
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
82°C Uncured
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-54°C Uncured
Density Test Methods
Density Test Method
8.7 (weight (lbs/gal)) Uncured
Specific Gravity Test Methods
Specific Gravity Test Method
1.050 Uncured