3M Double Coated Polyethylene Foam Tape 4462W Datasheet 3M Double Coated Polyethylene Foam Tape 4462W

CONTACT REP
Information provided by Gluespec

  • Description for 3M Double Coated Polyethylene Foam Tape 4462W

    A conformable closed cell foam with a rubber adhesive that provides high initial adhesion to a variety of surfaces including polyethylene and polypropylene. Specially formulated for many indoor general purpose mounting and joining applications.

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Solvent Resistance
    Application Type Mounting
    Material Form Foam tape
    Substrate Plastics, Polypropylene, Rubber, Stainless Steel, Polyethylene, Many other plastics
    Industry Electronic Equipment Trim, Specially formulated for many indoor general purpose mounting applications, Display Case, Other Displays, Wire and Cable Clips, Signs, Point of Purchase, Nameplates, Plaques
    Manufacturer 3M
    Chemistry Rubber adhesive
    Cure Method Pressure sensitive
    Application Temperature (°F) 70 to 100
    Color White
    Tape Width (mm) 3.200 to 1,219
    Total Thickness (mm) 0.800
    Double Sided Double coated
    Tape Backing Color White
    Liner Thickness (mm) 0.080
    Static Shear Strength (min) 1000 (g), 250 (g)
    Paper Liner Type: Paper
    High Temperature Resistance (°C) 70, 49
    Crack Resistance No cracking when flexed around a 1/4 in (6.4 mm) mandrel
    Conformable Conformable
    Density (g/cm³) 0.095
    Key Specifications TSCA
    Tape Backing/Carrier Closed Cell Crosslinked Polyethylene Foam

  • Technical Data for 3M Double Coated Polyethylene Foam Tape 4462W

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance : Relative Solvent Resistance - Solvent Resistance
    • Application Type
    • Material Form
      • Foam - Foam tape
    • Substrate
    • Industry
      • Displays - Display Case, Point of Purchase, Other Displays
      • Sign - Signs, Nameplates, Plaques
      • Electronics - Electronic Equipment Trim
      • Industrial - Ideal for many sealing applications, Ideal for many gasketing applications
      • General Purpose - Specially formulated for many indoor general purpose mounting applications
      • Cable - Wire and Cable Clips
      • Appliances - Appliance
      • Other - Specially formulated for many indoor general purpose joining applications, Plastic Hooks, Plastic racks, Plastic dispensers
    • Chemistry
      • Other - Rubber adhesive
    • Cure Method
      • Pressure Sensitive (min) - Pressure sensitive
    • Color
      • White
    • Key Specifications
      • TSCA (Toxic Substances Control Act) - TSCA
    • Tape Backing/Carrier
      • Polyethylene Foam - Closed Cell Crosslinked Polyethylene Foam
    Specifications
    Cure Specs
    Application Temperature (°F) 70 to 100
    Bond Strength
    General Bond Strength (psi) High initial adhesion
    Peel Strength (piw) 128 (oz/in) Test Method
    Shear Strength (psi) 380 (kPa) Test Method
    Tensile Strength (psi) 415 (kPa) Test Method
    Tape Properties
    Tape Width (mm) 3.200 to 1,219
    Total Thickness (mm) 0.800
    Double Sided Double coated
    Tape Backing Color White
    Liner Thickness (mm) 0.080
    Static Shear Strength (min) 1000 (g), 250 (g) Test Method
    Material Resistance
    UV Resistance UV resistance
    High Temperature Resistance (°C) 70, 49 Test Method
    Hardness
    Crack Resistance No cracking when flexed around a 1/4 in (6.4 mm) mandrel
    Conformable Conformable
    Other Properties
    Density (g/cm³) 0.095 Test Method
    Business Information
    Shelf Life Details 18 months from date of manufacture when stored in original cartons at 70°F (21°C) and 50% relative humidity
    Shelf Life Temperature (°F) 70
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 18
    Not Good For
    Don't Use For Direct exposure to U.V. light

  • Best Practices for 3M Double Coated Polyethylene Foam Tape 4462W

    *See Terms of Use Below

    1. Surface Preparation

      To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or water.

    2. Application

      Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.

      Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C).

      However, once properly applied, low temperature holding is generally satisfactory.

  • Comparable Materials for 3M Double Coated Polyethylene Foam Tape 4462W

    *See Terms of Use Below

    Spec Engine® Results

    • 3M
      Single-Coated Vinyl Foam Tape 4504(3M)

      A flexible, black, medium-density with a pressure-sensitive acrylic adhesive on one side. It will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized).

    • 3M
      4014(3M)

      An open-cell polyurethane foam with an aluminum constraining layer on one side and a pressure sensitive adhesive on the opposite side to facilitate attachment to the surface of the vibrating panel.

    • 3M
      4462B(3M)

      A black, conformable closed cell foam with a rubber adhesive that provides high initial adhesion to a variety of surfaces including polyethylene and polypropylene.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Testing the effectiveness of surface treatments

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Lightweighting drives automotive adhesives demand

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M Double Coated Polyethylene Foam Tape 4462W

All 3M Materials
View Now
Home Appliances
View Now
Sign, Printing and Graphics
View Now
Cable
View Now

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Peel Strength Test Methods
Peel Strength Cure Time Cure Temperature Substrate Test Method
128 (oz/in) 4,320 min 25°C Stainless Steel 90° Peel Strength, ASTM D3330, Dwell, Environmental Condition: 50%RH, Backing: 2 mil PET, Notes: 12 in/min (300 mm/min)
Tensile Strength Test Methods
Tensile Strength Type Cure Time Test Method
415 (kPa) Normal tensile 4,320 min ASTM D897, T-Block, Dwell, Notes: 1 in.² (6.45 cm²), Jaw Speed 2 in./min. (50 mm/min.)
Shear Strength Test Methods
Shear Strength Type Test Method
380 (kPa) Overlap Shear Strength ASTM D1002, Notes: 1 in² (6.45 cm²), Jaw Speed 0.5 in/min (12.7 mm/min)
Static Shear Strength Test Methods
Static Shear Strength Static Shear Test Method
1000 (g) ASTM D3654, Test Condition: Room Temperature, Notes: 1/2 in x 1 in sample size; Test terminated at 10,000 min
250 (g) ASTM D3654, Test Condition: @ 49°C (120°F), Notes: 1/2 in x 1 in sample size; Test terminated at 10,000 min
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
70°C Short Term (minutes, hour)
49°C Long term (day, weeks)
Density Test Methods
Density Test Method
0.095 g/cm³ Foam density