3M Double Coated Polyethylene Foam Tape 4492W Datasheet 3M Double Coated Polyethylene Foam Tape 4492W

CONTACT REP
Information provided by Gluespec

  • Description for 3M Double Coated Polyethylene Foam Tape 4492W

    A conformable closed cell foam with a high strength acrylic adhesive that provides good initial tack and<br/>offers high ultimate adhesion to a wide variety of surfaces.

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Hydrocarbon solvent resistance
    Application Type Bonding
    Material Form Tape: Foam Tape
    Substrate Plastics, Stainless Steel
    Industry Electronic Equipment Trim, For more demanding indoor and moderate outdoor general purpose mounting applications, Display Case, Wire and Cable Clips, Plaques, For more demanding indoor and moderate outdoor general purpose joining applications, Point of Purchase and other Displays, Nameplates, Signs
    Manufacturer 3M
    Chemistry 430 Acrylic adhesive
    Cure Method Pressure sensitive
    Application Temperature (°F) 70 to 100
    Color White
    Tape Width (mm) 3.200 to 1,219
    Total Thickness (mm) 0.800
    Double Sided Double Sided
    Liner Thickness (mm) 0.080
    Static Shear Strength (min) 1000 (g), 500 (g), 250 (g)
    Static Shear Time (min) 10,000, 10,000, 10,000
    Static Shear Temperature (°C) 20 to 25 Room Temperature, 49, 70
    Paper Liner Type: Paper
    High Temperature Resistance (°C) 82, 70
    Conformable Conformable
    Density (g/cm³) 0.095
    Key Specifications Registered to ISO 9001 standards
    Tape Backing/Carrier Closed Cell Crosslinked Polyethylene Foam Carrier

  • Technical Data for 3M Double Coated Polyethylene Foam Tape 4492W

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance : Relative Solvent Resistance - Hydrocarbon solvent resistance
    • Application Type
    • Material Form
      • Tape : Foam Tape
    • Substrate
    • Industry
      • Displays - Display Case, Point of Purchase and other Displays
      • Sign - Plaques, Nameplates, Signs
      • Electronics - Electronic Equipment Trim
      • General Purpose - For more demanding indoor and moderate outdoor general purpose mounting applications, For more demanding indoor and moderate outdoor general purpose joining applications
      • Cable - Wire and Cable Clips
      • Appliances - Appliance
      • Other - Plastic dispensers, Plastic racks, Plastic Hooks, Ideal for many gasketing applications, Ideal for many sealing applications
    • Chemistry
    • Cure Method
      • Pressure Sensitive (min) - Pressure sensitive
    • Color
      • White
    • Key Specifications
      • International Organization for Standardization - Registered to ISO 9001 standards
    • Tape Backing/Carrier
      • Polyethylene Foam - Closed Cell Crosslinked Polyethylene Foam Carrier
    Specifications
    Cure Specs
    Application Temperature (°F) 70 to 100
    Bond Strength
    General Bond Strength (psi) High strength, Good initial tack
    Peel Strength (piw) 14 (N/cm) Test Method
    Shear Strength (psi) 55 (lb/in²) Test Method
    Tensile Strength (psi) 60 (lb/in²) Test Method
    Tape Properties
    Tape Width (mm) 3.200 to 1,219
    Total Thickness (mm) 0.800
    Double Sided Double Sided
    Liner Thickness (mm) 0.080
    Static Shear Strength (min) 1000 (g), 500 (g), 250 (g) Test Method
    Static Shear Time (min) 10,000, 10,000, 10,000
    Static Shear Temperature (°C) 20 to 25 Room Temperature, 49, 70
    Material Resistance
    UV Resistance No apparent degradation when exposed for seven days in U.V. chamber
    High Temperature Resistance (°C) 82, 70 Test Method
    Hardness
    Conformable Conformable
    Other Properties
    Density (g/cm³) 0.095 Test Method
    Business Information
    Shelf Life Details Product retains its performance and properties for 24 months from date of manufacture when stored in original cartons at 70°F (21°C) and 50% relative humidity.
    Shelf Life Temperature (°F) 70
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 24

  • Best Practices for 3M Double Coated Polyethylene Foam Tape 4492W

    *See Terms of Use Below

    1. Surface Preparation

      To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or water. Note: Be sure to follow the manufacturer’s precautions and directions for use when using cleaning solvents.

    2. Application

      Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.

      Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

      Application Equipment: To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality.

  • Comparable Materials for 3M Double Coated Polyethylene Foam Tape 4492W

    *See Terms of Use Below

    Spec Engine® Results

    • 3M
      4930(3M)

      • White, closed-cell acrylic foam carrier • used on high surface energy plastic substrates • Apply as low as 50°F (10°C) • UL 746C

    • 3M
      Specialty Tape 4611(3M)

      A dark gray double coated acrylic foam tape with PE film liner. The general purpose acrylic adhesive on both sides bonds to a broad range of high surface energy substrates including metals, glass and easier to bond paints and plastics.

    • 3M
      VHB Tape 4955(3M)

      • Double sided foam tape • Use in many interior bonding applications • Use in many exterior bonding applications • High shear strength • High tensile strength • Resistance to plasticizer migration • Outstanding durability.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Plastic Bonding with Adhesives - Considerations Q&A

Read Article

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M Double Coated Polyethylene Foam Tape 4492W

All 3M Materials
View Now

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Peel Strength Test Methods
Peel Strength Cure Time Cure Temperature Substrate Test Method
14 (N/cm) 4,320 min 23°C Stainless steel 90° Peel Adhesion, 12 in/min (300 mm/min) ASTM D3330, Dwell, 50% RH Backing: 2 mil Polyester
Tensile Strength Test Methods
Tensile Strength Cure Time Test Method
60 (lb/in²) 4,320 min Normal Tensile, ASTM D897, T-Block, Dwell, Notes: 1 in.² (6.45 cm²), Jaw Speed 2 in./min. (50 mm/min.)
Shear Strength Test Methods
Shear Strength Type Test Method
55 (lb/in²) Overlap Shear Strength ASTM D1002, Notes: 1 in² (6.45 cm²), Jaw Speed 0.5 in/min (12.7 mm/min)
Static Shear Strength Test Methods
Static Shear Strength Static Shear Test Method
1000 (g) ASTM D3654, Notes: 1/2 in x 1 in sample size
500 (g) ASTM D3654, Notes: 1/2 in x 1 in sample size
250 (g) ASTM D3654, Notes: 1/2 in x 1 in sample size
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
82°C Short Term (Minutes, Hours)
70°C Long Term (Days, Weeks)
Density Test Methods
Density Test Method
0.095 g/cm³ Foam Density