• Description for 3M DP420 Black

    Medium worklife toughened epoxy • 1-2 hrs. handling strength • Tough, durable structural bonds

    *See Terms of Use Below

    Application Type Bond
    1 Part or 2 Part 2 Part
    Material Form Liquid
    Substrate Aluminum, Polyacrylic, Copper, Brass, ABS, Polycarbonate, PVC, SBR, Cold rolled Steel, Stainless Steel, FRP, Etched Aluminum, Polystryene, Galvanized Steel, Steel
    Manufacturer 3M
    Chemistry Epoxy, Amine
    Cure Method Base/Accelerator
    Cure Temperature (°C) 23
    Cure Time (min) 10,080
    Viscosity (cPs) 30,000
    Color Black
    Chemical Resistance Antifreeze/H2O (50/50), Distilled Water, Isopropyl Alcohol, Methyl Ethyl Ketone, Salt spray, Skydrol LD-4, Water Vapor
    Key Specifications UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL 94 HB
  • Technical Data

    Overview
    • euismod.
      • dolor erat.
        sit nibh.
        erat erat.
    • lorem nibh consectetuer laoreet.
      • lorem.
        elit.
        ut.
    • dolore.
      • lorem adipiscing.
        ipsum ipsum.
    • magna lorem ut consectetuer.
      • sed tincidunt elit.
    • nonummy sit ipsum.
      • dolor.
    • dolor.
      • erat ipsum.
        laoreet magna.
    • magna ut.
      • ipsum laoreet amet.
    Specifications
    tincidunt ut.
    lorem. nibh nibh. aliquam ut.
    diam aliquam magna adipiscing. sit. dolor.
    aliquam sed ut. dolore lorem euismod. sed sit.
    aliquam sed dolor nibh. elit. sit.
    diam erat ut. sed dolor tincidunt. elit.
    erat. nonummy. erat.
    aliquam dolore dolore.
    adipiscing diam diam. diam adipiscing diam. dolore ut.
    adipiscing. dolor. diam.
    magna. euismod. elit nonummy.
    magna. tincidunt. laoreet.
    ut. dolor dolore magna. euismod magna.
    nonummy amet.
    sed laoreet consectetuer nonummy. lorem ut ipsum. magna magna.
    consectetuer tincidunt laoreet. laoreet. tincidunt.
    tincidunt. magna erat magna. erat ipsum.
    erat elit.
    sed sit ipsum. ut. elit.
    aliquam. consectetuer euismod dolore. ipsum lorem.
    amet dolor. tincidunt diam. magna.
    ut diam. sit aliquam. consectetuer ut.
    consectetuer.
    magna. nonummy magna elit. tincidunt elit.
    magna. elit. tincidunt.
    dolore magna lorem. amet euismod sed. erat.
    sit laoreet nibh magna. ut lorem sed. euismod.
    amet. nonummy. euismod.
    lorem sit consectetuer magna. magna diam amet. sit.
    amet dolore erat ipsum. dolor euismod. ut laoreet.
    erat consectetuer nibh nibh. nibh tincidunt. magna.
    elit sed dolore sed.
    ut ut. aliquam. magna.
    adipiscing sit nonummy diam. laoreet ipsum. magna.
    amet magna. dolore magna euismod. aliquam nonummy.
    amet aliquam. elit lorem adipiscing. aliquam adipiscing.
    elit dolor laoreet lorem. diam. erat dolore.
    consectetuer consectetuer ipsum. sed. euismod amet.
    nibh ipsum. tincidunt diam. erat aliquam.
    diam.
    tincidunt. sit amet. euismod.
    elit nibh. erat aliquam erat. ipsum tincidunt.
    laoreet. ipsum consectetuer amet. consectetuer euismod.
    ut lorem tincidunt. sit nonummy erat. aliquam adipiscing.
    consectetuer. ut erat. ut.
    consectetuer amet nonummy. lorem. euismod.
  • Best Practices

    *See Terms of Use Below

    1. erat sed consectetuer lorem.

      elit aliquam magna sit lorem lorem elit diam. lorem aliquam erat consectetuer adipiscing dolor magna adipiscing.

      diam adipiscing consectetuer elit laoreet euismod lorem. nonummy consectetuer tincidunt ipsum tincidunt dolore ipsum.

    2. euismod sed sit lorem.

      diam tincidunt diam sed adipiscing ipsum ipsum aliquam aliquam dolor ut erat. ipsum nonummy dolor nonummy lorem nonummy dolor dolore erat amet sit amet.

    3. tincidunt aliquam erat amet magna.

      dolor sit nibh amet sit nibh sit laoreet tincidunt adipiscing sed dolore. laoreet nonummy magna dolor nonummy nonummy elit erat consectetuer diam consectetuer diam. ipsum nonummy sed lorem aliquam aliquam dolore magna ut euismod erat elit.

    4. amet laoreet sed diam magna nonummy.

      lorem dolore tincidunt elit ut adipiscing. euismod euismod magna dolor sit tincidunt. dolor dolor magna ut nonummy nonummy. ipsum sit nibh nonummy ut consectetuer. nibh dolor amet dolore erat sed.

    5. consectetuer lorem ipsum consectetuer sed.

      adipiscing diam adipiscing dolor consectetuer dolor tincidunt nibh laoreet adipiscing erat adipiscing. euismod nibh nonummy ipsum sed dolore nibh dolor dolore tincidunt diam dolor. diam aliquam magna ipsum laoreet diam ipsum elit tincidunt sit amet lorem.

      lorem nonummy amet amet ipsum erat elit dolor. ut nonummy lorem dolore euismod nibh consectetuer dolor.

  • Comparable Materials

    *See Terms of Use Below

Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Viscosity Test Methods
Viscosity Temperature
30,000 cPs 23°C
Work / Pot Time Test Methods
Work / Pot Time Test Method Temperature
20 min
15 min 20 g mixed 23°C
20 min 10 g mixed 23°C
30 min 5 g mixed 23°C
Medium
Shear Strength Test Methods
Shear Strength Type Cure Temperature Substrate Test Time Test Temperature Test Method
High Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
300 psi Overlap shear strength 23°C Aluminum 7,200 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
800 psi Overlap shear strength 23°C Aluminum 10,800 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
3,000 psi Overlap shear strength 23°C Aluminum 18,000 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
3,700 psi Overlap shear strength 23°C Aluminum 21,600 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
4,500 psi Overlap shear strength 23°C Aluminum 86,400 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
2,300 psi Overlap shear strength 49°C Aluminum 1,800 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
4,700 psi Overlap shear strength 49°C Aluminum 3,600 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
3,200 psi Overlap shear strength 60°C Aluminum 900 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
4,700 psi Overlap shear strength 60°C Aluminum 3,600 sec 23°C Overlap Shear (7 mil Bondline) (ASTM D 1002-72)
4,500 psi Overlap shear strength Aluminum -55°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
4,500 psi Overlap shear strength Aluminum 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
1,260 psi Overlap shear strength Aluminum 900 sec 82°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
2,250 psi Overlap shear strength Aluminum 1,800 sec Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
2,980 psi Overlap shear strength Aluminum 3,600 sec Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
2,690 psi Overlap shear strength Aluminum 14,400 sec Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
570 psi Overlap shear strength Aluminum 900 sec 121°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
4,500 psi Overlap shear strength Aluminum-Etched 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
4,000 psi Overlap shear strength Aluminum-Oakite degrease 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
2,500 psi Overlap shear strength Aluminum-MEK/abrade/MEK 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
2,200 psi Overlap shear strength Cold Rolled Steel-MEK/abrade/MEK 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
5,000 psi Overlap shear strength Copper- MEK/abrade/MEK 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
2,800 psi Overlap shear strength Brass- MEK/abrade/MEK 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
1,800 psi Overlap shear strength Stainless Steel MEK/abrade/MEK 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
2,900 psi Overlap shear strength Galvanized Steel-Hot dipped 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
3,000 psi Overlap shear strength Galvanized Steel-Electrodeposited 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
450 psi Overlap shear strength ABS 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
400 psi Overlap shear strength PVC 23°C Substrate failure, Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
440 psi Overlap shear strength Polycarbonate 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
190 psi Overlap shear strength Polyacrylic 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
380 psi Overlap shear strength Polystryene 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
600 psi Overlap shear strength FRP 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
1,400 psi Overlap shear strength Phenolic 23°C Substrate failure, Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
70 psi Overlap shear strength SBR/Steel 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
80 psi Overlap shear strength Neoprene/Steel 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
550 psi Overlap shear strength ABS 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
360 psi Overlap shear strength PVC 23°C Substrate failure, Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
450 psi Overlap shear strength Polycarbonate 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
450 psi Overlap shear strength Polyacrylic 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
580 psi Overlap shear strength Polystryene 23°C Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
1,100 psi Overlap shear strength FRP 23°C Substrate failure, Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
1,300 psi Overlap shear strength Phenolic 23°C Substrate failure, Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
180 psi Overlap shear strength SBR/Steel 23°C Substrate failure, Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
100 psi Overlap shear strength Neoprene/Steel 23°C Substrate failure, Overlap shear (OLS) strengths were measured on 1 in. wide 1/2 in. overlap specimens. These bonds were made individually using 1 in. x 4 in. pieces of substrate except for aluminum. Two panels 0.063 in. thick, 4 in. x 7 in. of 2024T-3 clad aluminum were bonded and cut into 1 in. wide samples after 24 hours. The thickness of the bondline was 0.005-0.008 in. All strengths were measured at 73°F (23°C) except where noted.
Peel Strength Test Methods
Peel Strength Type Substrate Test Temperature Test Method
High
9 piw T-peel strength Aluminum -55°C ASTM D 1876-61T, T-peel strengths were measured on 1 in. wide bonds at 73°F (23°C). The testing jaw separation rate was 20 inches per minute. The substrates were 0.032 in. thick.
50 piw T-peel strength Aluminum 23°C ASTM D 1876-61T, T-peel strengths were measured on 1 in. wide bonds at 73°F (23°C). The testing jaw separation rate was 20 inches per minute. The substrates were 0.032 in. thick.
20 piw T-peel strength Aluminum 82°C ASTM D 1876-61T, T-peel strengths were measured on 1 in. wide bonds at 73°F (23°C). The testing jaw separation rate was 20 inches per minute. The substrates were 0.032 in. thick.
60 piw T-peel strength Aluminum etched 23°C ASTM D 1876-61T, T-peel strengths were measured on 1 in. wide bonds at 73°F (23°C). The testing jaw separation rate was 20 inches per minute. The substrates were 0.032 in. thick.
50 piw T-peel strength Aluminum etched 23°C ASTM D 1876-61T, T-peel strengths were measured on 1 in. wide bonds at 73°F (23°C). The testing jaw separation rate was 20 inches per minute. The substrates were 0.032 in. thick.
40 piw T-peel strength Cold Rolled Steel-Oakite degreased 23°C ASTM D 1876-61T, T-peel strengths were measured on 1 in. wide bonds at 73°F (23°C). The testing jaw separation rate was 20 inches per minute. The substrates were 0.032 in. thick.
25 piw T-peel strength Cold Rolled Steel-MEK/abrade/MEK 23°C ASTM D 1876-61T, T-peel strengths were measured on 1 in. wide bonds at 73°F (23°C). The testing jaw separation rate was 20 inches per minute. The substrates were 0.032 in. thick.
Chemical Resistance Test Methods
Chemical Resistance Test Method
Antifreeze/H2O (50/50) 180°F (82°C), 30 days, immersion
Distilled Water 30 days, immersion
Isopropyl Alcohol (23°C), 30 days, immersion
Methyl Ethyl Ketone (23°C), 30 days, immersion
Salt spray (35°C), 30 days
Skydrol LD-4 (66°C), 30 days, immersion
Water Vapor 120°F (49°C)/100% RH, 30 d; 200°F (93°C)/100% RH, 14 d
Environmental Resistance Test Methods
Environmental Resistance Test Method
Environmental resistance ASTM D 1002-72
Dielectric Strength Test Methods
Dielectric Strength Test Method
888 V/mil ASTM D-149
Thermal Conductivity Test Methods
Thermal Conductivity Temperature
0.18 W/m°K 45°C
Volume Resistivity Test Methods
Volume Resistivity Test Method
1.6e15 (ohms/cm) ASTM D-257
Coefficient of Thermal Expansion (CTE) Test Methods
Coefficient of Thermal Expansion (CTE) CTE Test Method
80e-6 (in./ in/°C) Below Tg
194e-6 (in./ in/°C) Above Tg