

-
Description for 3M DP5003NS
A non-sag, black, rapid setting, two-component polyurethane. The components are automatically mixed and easily dispensed as a bubble-free.Application Type Bond, Seal 1 Part or 2 Part 2-Part Material Form Paste Substrate Ceramic, Glass, Metal, PVC, PlyWood, Concrete, Wood Industry Doors Manufacturer 3M Chemistry Polyurethane Application Method Spatula, Trowel Cure Method 2 Parts Cure Temperature (°C) 25 Room Temperature Cure Time (min) 1,440, High Speed Curing Viscosity (cPs) Non-sag Color Black, Brick High Temperature Resistance (°C) 121 Low Temperature Resistance (°C) -51 -
Technical Data for 3M DP5003NS
Overview
-
1 Part or 2 Part
- 2-Part
-
Material Form
- Paste
-
Industry
- Construction - Chimneys, Frames, Roof, Seams of Shower, Vent Flashing
- Construction Door - Doors
- Other - Valley
-
Chemistry
-
Application Method
- Dispenser - Application equipment
- Flow - Flow equipment
- Spatula/Trowel - Spatula, Trowel
-
Cure Method
- 2-Part Cure - 2 Parts
-
Color
- Black
- Red - Brick
Specifications
Cure Specs
Cure Temperature (°C) 25 Room Temperature Test Method Cure Time (min) 1,440, High Speed Curing Test Method Viscosity (cPs) Non-sag Set Time (min) Rapid Tack Free Time (min) 30 Test Method Work / Pot Time (min) 3.00 Test Method Mix Ratio 1:1 (by volume) Bond Strength
Shear Strength (psi) 500 Test Method Material Resistance
High Temperature Resistance (°C) 121 Low Temperature Resistance (°C) -51 Hardness
Shore A Hardness 75 Test Method Flexibility Flexible Other Properties
% Solids (%) 1.0 Business Information
Shelf Life Details This product has a shelf life of 6 months when properly stored in unopened packages at temperatures of 65°F to 85°F (18°C to 30°C). Do not expose to excessive cold or moisture. Shelf Life Temperature (°F) 64 to 86 Shelf Life (mon) 6 -
Best Practices for 3M DP5003NS
-
Mixing
With the squeeze of the trigger, the components are automatically mixed and easily dispensed as a bubble-free, non-sag paste.
-
Clean-Up
Remove the masking tape surrounding the bonding areas.
-
-
Comparable Materials for 3M DP5003NS
Spec Engine® Results
Popular Articles
Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation
Read ArticleWhat Are the Differences Between Adhesives and Sealants?
Read ArticleAnaerobic Adhesives
Read ArticleTesting the effectiveness of surface treatments
Read ArticleSponsored Articles
Unique Advantages of Contact Adhesives
Read ArticleUsing LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials
Read ArticleSylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:
Read ArticleCase Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive
Read ArticleFeatured Ads

Cure Temperature Test Methods
Cure Temperature | Cure Time Test Method |
---|---|
25°C Room Temperature | PEC, 10 g, 1/4" thick @ 77°F (25°C) |
Cure Time Test Methods
Cure Time | Test Method |
---|---|
1,440 min | PEC, 10 g, 1/4" thick @ 77°F (25°C) |
High Speed Curing |
Tack Free Time Test Methods
Tack Free Time | Tack Free Temperature | Test Method |
---|---|---|
30 min | 25°C Room Temperature | PEC, 10 g, 1/4" thick @ 77°F (25°C) |
Work / Pot Time Test Methods
Work / Pot Time | Test Method | Temperature |
---|---|---|
3.00 min | PEC, 10 g, 1/4" thick @ 77°F (25°C) | 25°C Room Temperature |
Shear Strength Test Methods
Shear Strength | Type | Test Time | Test Temperature | Test Method |
---|---|---|---|---|
500 psi | Lap shear strength | 604,800 sec | 25°C | ASTM D1002-72 |
Shore A Hardness Test Methods
Shore A Hardness | Shore Hardness Test Method | Hardness Temperature |
---|---|---|
75 | ASTM D2240-91, 1 hour at 77°F (25°C) | 25°C Room Temperature |