| Application Type | Bond, General bonding and sealing |
|---|---|
| 1 Part or 2 Part | 2 Part |
| Material Form | Liquid, Non-sag paste(after mixing) |
| Substrate | Ceramic, Fiber Glass, Metal, Plastic, Wood, Bonding of dissimilar substrates, Aluminum, Cold Rolled Steel, Nylon, Polycarbonate, Acrylic, Rigid PVC, ABS, Aluminum (etched) |
| Manufacturer | 3M |
| Chemistry | Polyurethane |
| Cure Method | 2 Parts |
| Cure Temperature (°C) | 25 Room temperature |
| Cure Time (min) | 2,880 |
| Viscosity (cPs) | Low, Non-sag, <250,000 |
| Color | Black |
| High Temperature Resistance (°C) | 121 |
| Low Temperature Resistance (°C) | -51 |
3M™ Scotch-Weld™ Urethane Adhesive DP620NS is supplied in dual syringe plastic duo-pak cartridges as part of the 3M™ EPX™ Applicator System. The duo-pak cartridges are supplied in 50 ml configuration. To use the EPX cartridge system simply insert the duo-pak cartridge into the EPX applicator. Next, remove the duo-pak cartridge cap and expel a small amount of adhesive to be sure both sides of the duo-pak cartridge are flowing evenly and freely. If simultaneous mixing of Part A and Part B is desired, attach the EPX mixing nozzle to the duo-pak cartridge and begin dispensing the adhesive.
Apply adhesive to clean, dry surfaces, joint parts and secure until adhesive sets.
Automatically
Remove the masking tape surrounding the bonding areas.
| erat consectetuer. | elit ut consectetuer. | amet consectetuer. |
|---|---|---|
| consectetuer sed. | adipiscing laoreet. | tincidunt. |
| dolore amet sed erat. | ut consectetuer amet. | erat sed. |
| adipiscing sit aliquam. | magna euismod. | euismod. |
| sed nonummy. | nibh. | tincidunt elit. |
|---|---|---|
| aliquam lorem. | dolore. | euismod nibh. |
| lorem magna nibh sed. | elit tincidunt ipsum. | ut consectetuer. |
| sit amet nonummy nonummy. | tincidunt euismod. | ipsum aliquam. |
|---|---|---|
| nonummy adipiscing. | dolore sit nibh. | dolor elit. |
| dolore amet. | diam. | euismod sit. |
| adipiscing amet. | euismod adipiscing. | adipiscing. |
| nibh. | ut sed consectetuer. | amet lorem. |
| amet tincidunt. | ipsum euismod aliquam. | dolor. |
| lorem consectetuer laoreet lorem. | amet amet. | dolor sed. |
| magna nonummy. | dolore. | nibh lorem. |
| amet sit sed adipiscing. | dolor dolore diam. | aliquam. |
|---|---|---|
| dolore sit. | erat dolor sed. | ut tincidunt. |
| erat amet consectetuer. | consectetuer. | nibh. |
| tincidunt elit ipsum. | magna diam consectetuer. | diam magna. |
| euismod. | ut tincidunt. | aliquam ut. |
magna erat laoreet diam aliquam ipsum sit adipiscing dolore sed. dolor consectetuer aliquam aliquam magna consectetuer adipiscing erat tincidunt amet. magna sed ipsum sit ut elit dolore nibh nonummy laoreet. erat diam laoreet sed laoreet nibh lorem magna laoreet nibh.
aliquam magna elit dolore diam magna euismod laoreet. nibh consectetuer euismod laoreet ipsum diam euismod nonummy.
euismod nonummy amet elit adipiscing ut diam elit ipsum nibh. elit euismod consectetuer tincidunt elit dolor amet consectetuer lorem lorem.
erat nonummy consectetuer nibh dolore aliquam tincidunt laoreet laoreet laoreet laoreet consectetuer. ipsum nibh sit aliquam magna adipiscing tincidunt sed ipsum dolor dolore magna.
| Cure Temperature | Cure Time Test Method |
|---|---|
| 25°C Room temperature | PEC, Conditions 77°F 25°C |
| Cure Time | Test Method |
|---|---|
| 2,880 min | PEC, Conditions 77°F 25°C |
| Set Time | Set Temperature |
|---|---|
| 240 min | 20 to 25°C Room temperature |
| Rapid |
| Viscosity | Test Method | Temperature |
|---|---|---|
| Low | ||
| Non-sag | HBDVI+CP | 25°C Room Temperature |
| <250,000 cPs | 24°C |
| Work / Pot Time | Test Method | Temperature |
|---|---|---|
| Medium | ||
| 20 min | PEC | 25°C Room Temperature |
| Fixture or Handling Strength Time | Fixture-Handling Strength Test Method |
|---|---|
| 240 min | Cured, 50 PSI Overlap shear strength |
| Shear Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 2,500 psi | Lap shear strength | Aluminum | 604,800 sec | 25°C Room temperature | ASTM D1002-72 |
| 2,800 psi | Overlap Shear Strength | Aluminum | -40°C | (ASTM D1002) | |
| 2,880 psi | Overlap Shear Strength | Aluminum | 23°C | (ASTM D1002) | |
| 550 psi | Overlap Shear Strength | Aluminum | 900 sec | 82°C | (ASTM D1002) |
| 2,880 psi | Overlap Shear Strength | Aluminum | 23°C | (ASTM D1002) MEK/abrade/MEK | |
| 1,700 psi | Overlap Shear Strength | Cold Rolled Steel | 23°C | (ASTM D1002) MEK/abrade/MEK | |
| 310 psi | Overlap Shear Strength | Nylon | 23°C | (ASTM D1002) IPA/abrade/IPA | |
| 430 psi | Overlap Shear Strength | Polycarbonate | 23°C | (ASTM D1002) IPA/abrade/IPA | |
| 400 psi | Overlap Shear Strength | Acrylic | 23°C | (ASTM D1002) IPA/abrade/IPA | |
| 700 psi | Overlap Shear Strength | SMC | 23°C | (ASTM D1002) IPA/abrade/IPA | |
| 480 psi | Overlap Shear Strength | Rigid PVC | 23°C | (ASTM D1002) IPA/abrade/IPA | |
| 630 psi | Overlap Shear Strength | ABS | 23°C | (ASTM D1002) IPA/abrade/IPA | |
| 310 psi | Overlap Shear Strength | HIPS | 23°C | (ASTM D1002) IPA/abrade/IPA |
| Peel Strength | Type | Substrate | Test Temperature | Test Method |
|---|---|---|---|---|
| 30 piw | Floating Roller peel | Aluminum | 23°C | ASTM D3167 |
| Environmental Resistance | Test Method |
|---|---|
| Environmental Resistance | Aluminum (etched) Measured by Overlap Shear Tested @ 73°F (23°C) (PSI) (ASTM D1002) |
| Shore D Hardness | Shore Hardness Test Method |
|---|---|
| 50 | Cure |
| Modulus | Temperature | Test Method |
|---|---|---|
| 131,000 psi | 24°C | Elastic Modulus (ASTM D638) |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
