3M Dual Lock Reclosable Fastener SJ3552 Datasheet 3M Dual Lock Reclosable Fastener SJ3552

Information provided by Gluespec
  • Description for 3M Dual Lock Reclosable Fastener SJ3552

    • Use in a variety of attachment solutions • Strong • Able use and attach just about any substrate • Reclosable fasteners • Black • Industrial.

    *See Terms of Use Below

    Brand Bumpon, Dual Lock
    Application Type Bond
    Material Form Bumpons
    Substrate Acrylic, Rigid Vinyl, Polystyrene, Glass, Bare Metal, Plastics, Polycarbonate, Sealed Wood, ABS, Aluminium
    Industry Attaching window , Attaching Door trim panels
    Manufacturer 3M
    Chemistry Acrylic, Polyolefin, Non-woven
    Cure Method Pressure Sensitive
    Color Black
    Total Thickness (mm) 0.089
    Single Sided Single Sided
    High Temperature Resistance (°C) 93
  • Technical Data for 3M Dual Lock Reclosable Fastener SJ3552

    Overview
    • Application Type
    • Material Form
      • Bumpons
    • Substrate
      • Glass
      • Metal - Bare Metal
      • Aluminum - Aluminium
      • Plastic - Plastics
      • Acrylic (PMMA) - Acrylic
      • Vinyl - Rigid Vinyl
      • Polystyrene (PS) - Polystyrene
      • Polycarbonate
      • ABS
      • Wood - Sealed Wood
      • Other - Rigid Substrates, Substrates having a slight texture or surface irregularities, Other metals, Any substrate
    • Industry
      • Industrial
      • Construction Window - Attaching window
      • Construction Door - Attaching Door trim panels
      • Other - Interior trim, Attaching accessories and equipment, Thin metal panel, Variety of attachment solutions
    • Chemistry
      • Polyolefin
      • Acrylic
      • Other - Non-woven
    • Application Method
      • Contact
    • Cure Method
      • Pressure Sensitive (min) - Pressure Sensitive
    • Color
      • Black
    • Brand
      • Dual Lock
      • Bumpon
    Specifications
    Bond Strength
    General Bond Strength (psi) Strong
    Peel Strength (piw) 1.2 (N/cm), 2.5 (N/cm), 3.3 (N/cm), 2.6 (N/cm), 3.2 (N/cm), 5.4 (N/cm), 8.1 (N/cm), 8.1 (N/cm) Test Method
    Shear Strength (psi) 9.8 (N/cm²), 14.5 (N/cm²), 15 (N/cm²), 41.3 (N/cm²) Test Method
    Cleavage Strength (psi) 21 (N/cm), 35 (N/cm), 42 (N/cm), 56 (N/cm) Test Method
    Tensile Strength (psi) 155 (grams/cm2), 9 (N/cm²), 155 (grams/cm2), 14.5(N/cm²), 155 (grams/cm2), 15.2 (N/cm²), 155 (grams/cm2), 21.4 (N/cm²), 15, 18.5 (N/cm²), 33, 18.5 (N/cm²), 29.6 (N/cm²), 29.6 (N/cm²), 41.4 (N/cm²) Test Method
    Tape Properties
    Total Thickness (mm) 0.089
    Single Sided Single Sided
    Tape Backing PSA VHB conformable
    Material Resistance
    High Temperature Resistance (°C) 93
    Business Information
    Shelf Life Details To obtain best performance, use this product within 24 months from date of manufacture.
    Shelf Life Temperature (°F) 140 to 176
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 24
    Not Good For
    Don't Use With Powder coated paints, Low surface energy substrates, Polypropylene, Unless surface modification, such as use of a primer, is made.
  • Best Practices for 3M Dual Lock Reclosable Fastener SJ3552

    *See Terms of Use Below

    1. Design

      Design Considerations: As a general rule, four square inches of fastener area per pound of static tensile or shear load to be supported is suggested as a starting point for evaluation. More or less area may be needed depending on specific conditions or end use applications. Type 250 Dual Lock reclosable fastener less than 0.75" (19 mm) width should not be engaged to other type 250 Dual Lock reclosable fastener as low disengagement values may occur

      Rounding the corners, recessing the product into the substrate and providing raised edges around the Dual Lock reclosable fastener can reduce the possibility of edge lifting or catching that may cause the fastener to be torn from the substrate, while improving the overall appearance of the fastener on the finished product. Mechanically securing the corners of the Dual Lock reclosable fastener can also reduce the possibility of edge lifting, but may reduce the closure performance.

      It is recommended that pieces of Dual Lock reclosable fastener be engaged to pieces or strips of Dual Lock reclosable fastener. Strips of Dual Lock reclosable fastener should not be engaged to strips of Dual Lock reclosable fastener as low disengagement may occur from incomplete engagement along the full strip. Pieces or strips of Dual Lock reclosable fastener can be engaged to pieces or strips of Scotchmate reclosable fastener loop.

    2. Surface Preparation

      The substrate surface should be cleaned to remove any surface contaminants with an appropriate cleaning method for the customer’s substrate, type and quantity of surface contaminants that need to be removed.

      Note: When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use.

    3. Application

      The fasteners and substrates should have equilibrated for a minimum of one hour at temperatures of 68° to 80°F (20° to 27°C) before application. Generally these adhesive backed fasteners should be applied to surfaces that are smooth, dry and free of oils, mold release agents or other surface contaminants.

      After the substrate surface has been cleaned and dried, the liner is removed from the fastener adhesive and without touching the adhesive, the fastener’s adhesive is applied to the surface using light finger pressure. The fastener must be rolled down, to increase contact of the adhesive with the substrate’s surface. Extra care must be exercised when rolling down Dual Lock reclosable fasteners to prevent bending of the stems which can compromise the closure strength. The following two methods allow adequate pressure to be applied to the Dual Lock reclosable fastener without damaging the stems

      The first method uses a hand roller, with the roller wheel covered with a Dual Lock reclosable fastener type 170 such as 3M™ Dual Lock™ Reclosable Fastener SJ3542. The Dual Lock reclosable fastener covered roller is rolled over the Dual Lock reclosable fastener applied to the substrate, engaging and disengaging the two Dual Lock reclosable fastener pieces. The hand roller can be used for many applications.

      The second method consists of engaging a strip of plainback Dual Lock reclosable fastener type 170 such as 3M™ Dual Lock™ Reclosable Fasteners SJ3442 or SJ3742 to the previously attached adhesive backed Dual Lock reclosable fastener. The backside of the plainback material can now be rolled down using a rubber roller, with no Dual Lock reclosable fastener on the roller, fully engaging the Dual Lock reclosable fastener. After rolling down three times in each direction, the strip of plainback Dual Lock reclosable fastener can be removed and used to roll down the next piece of Dual Lock reclosable fastener in a similar manner.

    4. Curing

      The pressure-sensitive adhesive bonds to the substrate on contact and parts can be handled immediately. Adhesive bond strength increases with time, pressure and temperature. A minimum of twenty four hours dwell time is recommended before applying a load or disengaging assembled parts. Recommended time at room temperature to achieve maximum bond strength is 72 hours

  • Comparable Materials for 3M Dual Lock Reclosable Fastener SJ3552

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Plastic Bonding with Adhesives - Considerations Q&A

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M Dual Lock Reclosable Fastener SJ3552

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Shear Strength Test Methods
Shear Strength Type Test Temperature Test Humidity
9.8 (N/cm²) Dynamic shear strength
14.5 (N/cm²) Dynamic shear strength 22°C 100 %
15 (N/cm²) Dynamic shear strength 22°C
41.3 (N/cm²) Dynamic shear strength 22°C
Tensile Strength Test Methods
Tensile Strength Type Substrate Test Method
155 (grams/cm2) Static Tensile Strength Type 250 to 400 (Engage)
9 (N/cm²) Static Tensile Strength Type 250 to 400 (Engage)
155 (grams/cm2) Static Tensile Strength Type 250 to 250 (Engage)
14.5(N/cm²) Static Tensile Strength Type 250 to 250 (Engage)
155 (grams/cm2) Static Tensile Strength Type 170 to 400 (Engage)
15.2 (N/cm²) Static Tensile Strength Type 170 to 400 (Engage)
155 (grams/cm2) Static Tensile Strength Type 170 to 250 (Engage)
21.4 (N/cm²) Static Tensile Strength Type 170 to 250 (Engage)
15 psi Dynamic Tensile Strength Low Profile to Low Profile (Engage)
18.5 (N/cm²) Dynamic Tensile Strength Low Profile to Low Profile (Engage)
33 psi Dynamic Tensile Strength Type 250 to 400 (Disengage)
18.5 (N/cm²) Dynamic Tensile Strength Type 250 to 400 (Disengage)
29.6 (N/cm²) Dynamic Tensile Type 250 to 250 (Disengage)
29.6 (N/cm²) Dynamic Tensile Type 170 to 400 (Disengage)
41.4 (N/cm²) Dynamic Tensile Type 170 to 250 (Disengage)
Cleavage Strength Test Methods
Cleavage Strength Substrate Test Method
21 (N/cm) Rigid backed from Rigid backed, Type 170 to 250 Width
35 (N/cm) Rigid backed from Rigid backed, Type 170 to 400 Width
42 (N/cm) Rigid backed from Rigid backed, Type 250 to 250 Width
56 (N/cm) Rigid backed from Rigid backed, Type 250 to 400 Width
Peel Strength Test Methods
Peel Strength Type Substrate Test Method
1.2 (N/cm) 90° Peel Adhesion Flexible to Flexible, Type 170 to 250 Width, ± 5°F and 50% ± 10% relative humidity.
2.5 (N/cm) 90° Peel Adhesion Flexible from Flexible, Type 170 to 400 Width, ± 5°F and 50% ± 10% relative humidity.
3.3 (N/cm) 90° Peel Adhesion Flexible from Flexible, Type 250 to 250 Width, ± 5°F and 50% ± 10% relative humidity.
2.6 (N/cm) 90° Peel Strenth Flexible from Flexible, Type 250 to 400 Width, ± 5°F and 50% ± 10% relative humidity.
3.2 (N/cm) T-Peel Adhesion Flexible from Rigid, Type 170 to 250 Width, ± 5°F and 50% ± 10% relative humidity.
5.4 (N/cm) T-Peel Adhesion Flexible from Rigid, Type 170 to 400 Width, ± 5°F and 50% ± 10% relative humidity.
8.1 (N/cm) T-Peel Adhesion Flexible from Rigid, Type 250 to 250 Width, ± 5°F and 50% ± 10% relative humidity.
8.1 (N/cm) T-Peel Adhesion Flexible from Rigid, Type 250 to 400 Width, ± 5°F and 50% ± 10% relative humidity.