Application Type Bond 1 Part or 2 Part 1 Part Material Form Transfer tape Substrate Many flexible vinyls, Neoprene, Steel Industry Attaching flexible vinyl graphics to vehicles Manufacturer 3M Chemistry Acrylic Cure Method Pressure Sensitive Color Slight amber tint, Clear Relative Solvent Resistance Chemical Resistance: Good High Temperature Resistance (°C) 94, 74, <71 Low Temperature Resistance (°C) -40 Other Resistance Outstanding resistance
Technical Data for 3M F9465PC
- Adhesive - Bond
1 Part or 2 Part
- 1 Part or 2 Part - 1 Part
- Tape - Transfer tape
- Automotive - Attaching flexible vinyl graphics to vehicles
- Sporting Equipment - Attaching flexible vinyl graphics to sporting helmets
- Sign, Printing and Graphics - Attaching flexible vinyl flms and graphics to signs, Attaching flexible vinyl graphics to collectibles
- Other - Attaching flexible vinyl tubing
- Pressure Sensitive (min) - Pressure Sensitive
- Clear / Transparent - Clear
- Red - Slight amber tint
Application Temperature (°F) 70 to 100
General Bond Strength (psi) 85 (oz./in.) Test Method
UV Resistance Excellent High Temperature Resistance (°C) 94, 74, <71 Low Temperature Resistance (°C) -40 Other Resistance Outstanding resistance
Shelf Life Details Storage: Store in original cartons at 70°F (21°C) and 50% relative humidity., When stored under proper conditions, product retains its performance and properties for two years from date of manufacture. Shelf Life Temperature (°F) 70 Shelf Life Type From date of manufacture Shelf Life (mon) 24
Not Good For
Don't Use For Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily
Best Practices for 3M F9465PC
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified.
Bond strength is dependent on the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
Comparable Materials for 3M F9465PC
Spec Engine® Results
Questions about this material?
Get personal assistance with your specific application needs.