| Application Type | Bond |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Transfer Tape |
| Substrate | Ceramic, Glass, ABS, Polycarbonate, UnPlasticized PVC, Enameled Steel, Stainless Steel, Aluminum, ThermoPlastic, Galvanized Steel, Nickel Plated Steel |
| Manufacturer | 3M |
| Chemistry | Isopropyl alcohol |
| Cure Method | Pressure sensitive |
| Color | Clear |
| Chemical Resistance | Acetone, Ammonia cleaner, Fluid, Gasoline, JP-4 fuel, Methyl ethyl ketone, Mineral spirits, Motor oil, Solvent |
| High Temperature Resistance (°C) | 149, 260 |
| Other Resistance | Insulation resistance |
| Key Specifications | UL 746C |
To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol/water mixture or heptane
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
| laoreet. | magna. | amet consectetuer. |
|---|---|---|
| amet. | diam. | aliquam. |
| magna. | laoreet. | lorem. |
| nonummy dolor diam. | erat. | tincidunt dolor. |
| elit amet. | dolore. | lorem. |
| tincidunt magna erat. | tincidunt elit. | ut. |
| tincidunt ipsum magna. | dolore. | elit. |
|---|---|---|
| consectetuer dolor lorem dolore. | sed. | dolore ipsum. |
| erat. | laoreet. | aliquam ipsum. |
| consectetuer dolore. | magna nibh sit. | nonummy. |
| elit consectetuer ipsum. | sit. | erat. |
| aliquam. | ipsum magna. | dolor ipsum. |
| diam ut tincidunt nibh. | euismod erat. | ipsum. |
| dolor dolor ipsum. | aliquam magna. | dolore. |
|---|---|---|
| magna sit. | sit adipiscing. | laoreet ipsum. |
| aliquam nonummy. | sed tincidunt. | lorem. |
aliquam laoreet nonummy laoreet dolor consectetuer. diam dolor consectetuer dolore lorem ut.
erat adipiscing adipiscing dolor sit aliquam nibh nonummy. sed consectetuer laoreet nibh nonummy sed laoreet consectetuer. sed adipiscing elit lorem amet sit consectetuer sit. laoreet sit erat tincidunt nibh sit tincidunt magna. erat sed nibh diam dolore dolor adipiscing sit.
diam ut adipiscing erat sed lorem tincidunt laoreet ipsum magna. aliquam dolor laoreet lorem sit elit lorem aliquam aliquam erat. consectetuer nibh aliquam euismod dolor dolore adipiscing diam consectetuer lorem.
euismod erat lorem consectetuer dolore sed tincidunt laoreet. consectetuer amet laoreet adipiscing adipiscing magna laoreet ut. dolore nibh tincidunt amet diam lorem tincidunt nibh. amet sit amet tincidunt aliquam dolore elit consectetuer. lorem aliquam erat aliquam nibh magna lorem magna.
| Shear Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 1000 (grams) | Static shear strength | Stainless steel | <600,000 sec | <149°C | Static Shear or Shear Holding Power to Stainless Steel (ASTM D-3654) |
| 80 psi | Dynamic Overlap Shear | Stainless steel | ASTM D1002 | ||
| 1000 g | Static Shear | 20 to 25°C Room Temperature | ASTM D3654 | ||
| 1000 g | Static Shear | 66°C | ASTM D3654 | ||
| 1000 g | Static Shear | 93°C | ASTM D3654 | ||
| 1000 g | Static Shear | 121°C Room Temperature | ASTM D3654 | ||
| 500 g | Static Shear | 149°C | ASTM D3654 | ||
| 500 g | Static Shear | 177°C | ASTM D3654 |
| Tensile Strength | Substrate | Test Method |
|---|---|---|
| 100 psi | Aluminum | ASTM D897 |
| Peel Strength | Cure Time | Substrate | Test Method |
|---|---|---|---|
| 9.0 (Ib/in) | Stainless steel | ASTM D3330 | |
| 128 (oz/in) | 4,320 min | Stainless Steel | ASTM D3330, Method E - Modied |
| Dielectric Strength | Temperature | Test Method |
|---|---|---|
| 5,500 V/mil | 23°C | ASTM D-149-97A |
| 3000 V | 20 to 25°C Room Temperature | ASTM D149 |
| 2600 V | 125°C | ASTM D149 |
| 1900 V | 175°C | ASTM D149 |
| 4.08 | 30°C | ASTM D149, 1kHz |
| Insulation Resistance | Test Method |
|---|---|
| > 1e6 (megaohms/in2) | ASTM D-1000 |
| Thermal Conductivity | Test Method |
|---|---|
| 0.16 W/m°K | ASTM C-177 |
| Outgassing | Test Method |
|---|---|
| 1.23% | TML, ASTM E595-77/84/90 |
| 0.01% | VCM, ASTM E595-77/84/90 |
| 1.29 % | Total Mass Loss, ASTM E595-77/84/90 |
| 0.02 % | Volatile Condensible Materials, ASTM E595-77/84/90 |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
