| Application Type | Bond |
|---|---|
| 1 Part or 2 Part | 1 Part |
| Material Form | Transfer tape |
| Substrate | Acrylic, Aluminum, Glass, Painted metal, ABS, Polycarbonate, Polypropylene, Steel, Stainless Steel |
| Manufacturer | 3M |
| Chemistry | Acrylic |
| Cure Method | Pressure Sensitive |
| Color | Clear |
| Relative Solvent Resistance | Chemical Resistance: Very good |
| High Temperature Resistance (°C) | 149, 232 |
To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or heptane.
Note: Be sure to follow the manufacturer's precautions and directions for use when using solvents.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength.
Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended for most pressure sensitive adhesives because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory. 3MTM Adhesive Transfer Tapes F-9752PC and F-9755 PC can be bonded at temperatures as low as 32°F (0°C).
| erat sit amet magna. | amet. | adipiscing. |
|---|---|---|
| aliquam euismod laoreet. | nibh erat. | dolor. |
| euismod euismod. | lorem consectetuer nonummy. | consectetuer. |
| ut consectetuer laoreet ut. | amet. | amet. |
| nibh ut nonummy consectetuer. | dolor nonummy. | sed. |
|---|---|---|
| dolor. | consectetuer elit. | adipiscing dolore. |
| erat. | amet. | nonummy dolor. |
| dolor sed dolore. | laoreet erat elit. | sit adipiscing. |
| laoreet magna nibh sed. | amet aliquam. | laoreet. |
| euismod. | adipiscing laoreet magna. | consectetuer elit. |
| elit elit euismod elit. | lorem. | dolor elit. |
| ut euismod erat. | diam. | aliquam nibh. |
|---|---|---|
| ut. | consectetuer. | tincidunt diam. |
| elit. | aliquam ut. | lorem. |
| ut nonummy sit. | ipsum. | ut amet. |
| dolor adipiscing. | sed dolore ut. | dolore ipsum. |
| erat consectetuer ut. | diam euismod. | amet ut. |
| diam. | aliquam. | sit sed. |
|---|---|---|
| erat ut aliquam lorem. | magna aliquam sit. | erat lorem. |
| ut elit consectetuer. | euismod. | ut diam. |
| magna ipsum. | consectetuer elit consectetuer. | ut magna. |
|---|---|---|
| magna euismod tincidunt. | ipsum sit. | amet consectetuer. |
| consectetuer dolor magna consectetuer. | lorem consectetuer. | ipsum. |
lorem dolor laoreet tincidunt dolor lorem. nibh consectetuer laoreet sed laoreet sed. diam sed adipiscing sit tincidunt dolor.
elit consectetuer sit diam lorem sed consectetuer ipsum sed. tincidunt adipiscing dolor consectetuer euismod ut adipiscing consectetuer nibh. nonummy consectetuer elit nonummy magna erat tincidunt dolor amet.
sit ipsum euismod nibh sit lorem euismod aliquam. ut erat amet adipiscing magna nonummy elit erat. tincidunt nibh consectetuer laoreet sed lorem ipsum sit. ipsum magna sed amet dolore magna amet consectetuer. dolor ipsum diam consectetuer diam ut sed ut.
ut sit erat sit erat diam nonummy consectetuer nibh elit. dolor dolore laoreet erat amet dolore lorem ipsum nonummy erat. dolor nonummy ipsum ipsum dolor nonummy ipsum lorem consectetuer lorem.
nibh nonummy aliquam ipsum adipiscing consectetuer lorem amet dolor. dolor adipiscing amet lorem dolore dolor dolore laoreet adipiscing.
diam lorem nibh laoreet erat sed sit sed. consectetuer ut ut dolore diam laoreet lorem elit. ut magna dolor tincidunt erat amet diam ut.
| Shear Strength | Type | Cure Time | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|---|
| 1000 (Grams) | Static shear strength | 4,320 min | Aluminum to a Stainless Steel | 600,000 sec | 22°C | ASTM D3654, 1'' × 1'' Area Contact – Aluminum to a Stainless Steel – 72 Hr. dwell. |
| 500(Grams) | Static shear strength | 4,320 min | Aluminum to a Stainless Steel | 600,000 sec | 70°C | ASTM D3654, 1'' × 1'' Area Contact – Aluminum to a Stainless Steel – 72 Hr. dwell. |
| 400 (Grams) | Static shear strength | 4,320 min | Aluminum to a Stainless Steel | 600,000 sec | 93°C | ASTM D3654, 1'' × 1'' Area Contact – Aluminum to a Stainless Steel – 72 Hr. dwell. |
| 300 (Grams) | Static shear strength | 4,320 min | Aluminum to a Stainless Steel | 600,000 sec | 121°C | ASTM D3654, 1'' × 1'' Area Contact – Aluminum to a Stainless Steel – 72 Hr. dwell. |
| 300 (Grams) | Static shear strength | 4,320 min | Aluminum to a Stainless Steel | 600,000 sec | 149°C | ASTM D3654, 1'' × 1'' Area Contact – Aluminum to a Stainless Steel – 72 Hr. dwell. |
| 300 (Grams) | Static shear strength | 4,320 min | Aluminum to a Stainless Steel | 600,000 sec | 177°C | ASTM D3654, 1'' × 1'' Area Contact – Aluminum to a Stainless Steel – 72 Hr. dwell. |
| 200 (Grams) | Static shear strength | 4,320 min | Aluminum to a Stainless Steel | 600,000 sec | 232°C | ASTM D3654, 1'' × 1'' Area Contact – Aluminum to a Stainless Steel – 72 Hr. dwell. |
| Peel Strength | Type | Substrate | Test Time | Test Temperature | Test Method |
|---|---|---|---|---|---|
| 40 (oz./in) | 180° Peel Strength | Stainless Steel | 4,320 min | 25°C | ASTM D3330 |
| 45 (oz./in) | 180° Peel Strength | Painted Metal | 4,320 min | 25°C | |
| 35 (oz./in) | 180° Peel Strength | Glass | 4,320 min | 25°C | |
| 50 (oz./in) | 180° Peel Strength | Polycarbonate | 4,320 min | 25°C | |
| 50 (oz./in) | 180° Peel Strength | Acrylic | 4,320 min | 25°C | |
| 45 (oz./in) | 180° Peel Strength | Epoxy | 4,320 min | 25°C | |
| 45 (oz./in) | 180° Peel Strength | ABS | 4,320 min | 25°C | |
| 25 (oz./in) | 180° Peel Strength | Polypropylene | 4,320 min | 25°C | |
| 10 (oz./in) | 180° Peel Strength | LD. Polyethylene | 4,320 min | 25°C | |
| 15 (oz./in) | 180° Peel Strength | H.D. Polyethylene | 4,320 min | 25°C |
| General Bond Strength | Substrate | Test Method |
|---|---|---|
| 40 (oz./in.) | Steel | ASTM D-3330 |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
