3M High Performance Adhesive Transfer 7955MP Datasheet 3M High Performance Adhesive Transfer 7955MP

Information provided by Gluespec
  • Description for 3M High Performance Adhesive Transfer 7955MP

    • Graphic nameplates • Outstanding adhesion • Bonding to plastics • Excellent solvent resistance • Excellent shear strength to resist slippage and edge lifting • Acrylic Adhesive • 2 mil aluminum foil • Clear.

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Excellent Solvent Resistance, Warm/humid, Chemical Resistance: Fluid Resistance: Excellent resistance to Water, Chemical Resistance: Splashes of organic solvents, Disinfectants, Chemical Resistance: MEK, Cleaning solutions, Weak base, Germicidals, Oils
    Application Type Bond, Lamination, Lamination to industrial foams for rotary die-cutting of small gaskets
    1 Part or 2 Part 1-Part
    Material Form Transfer Tape
    Substrate Aluminum, Glass, Metal, Plastic, ABS, polycarbonate, Polyester, Rigid PVC (unplasticized), Stainless Steel, Acrylic, High surface energy plastics
    Industry Membrane switch applications, Telecommunications, Medical, Graphic attachment, Automotive, Aerospace, Electronic markets, Medical components, Graphic nameplates and overlays, Graphic overlays for membrane switches, Elexible circuits
    Manufacturer 3M
    Chemistry Acrylic Adhesive
    Cure Method Pressure Sensitive
    Application Temperature (°F) 60 to 100
    Color Clear
    Total Thickness (mm) 0.132
    High Temperature Resistance (°C) Excellent, 204, 149, Performs well after exposure to hot/cold cycles
    Low Temperature Resistance (°C) Performs well after exposure to hot/cold cycles, -35
    Key Specifications UL 969
  • Technical Data for 3M High Performance Adhesive Transfer 7955MP

    Overview
    • Chemical Resistance
      • Chemical Resistance : Fluid Resistance : Water Resistance - Excellent resistance to Water
      • Chemical Resistance - Weak base, Warm/humid, Cleaning solutions, Germicidals, Disinfectants, Oils
      • Chemical Resistance : Relative Solvent Resistance - MEK, Splashes of organic solvents, Excellent Solvent Resistance
    • Application Type
      • Laminate - Lamination
      • Gasketing - Lamination to industrial foams for rotary die-cutting of small gaskets
      • Adhesive - Bond
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Tape - Transfer Tape
    • Substrate
    • Industry
      • Telecom / Datacom - Telecommunications
      • Automotive
      • Aerospace
      • Electronics - Membrane switch applications, Electronic markets, Graphic overlays for membrane switches, Elexible circuits
      • Industrial - Industrial equipment, Durable labels
      • Printing and Graphics - Graphic attachment, Graphic nameplates and overlays
      • Medical - Medical components
      • Appliances - Appliance
      • Other - Plastic parts
    • Chemistry
    • Application Method
      • Contact
    • Cure Method
      • Pressure Sensitive (min) - Pressure Sensitive
    • Color
      • Clear / Transparent - Clear
    • Key Specifications
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) - UL 969
    Specifications
    Cure Specs
    Application Temperature (°F) 60 to 100
    Bond Strength
    General Bond Strength (psi) Outstanding
    Peel Strength (piw) 47 (ounces/inch), 82 (ounces/inch), 168 (ounces/inch), 77 (ounces/inch), 62 (ounces/inch), 61 (ounces/inch), 80 (ounces/inch), 58 (ounces/inch), 52 (ounces/inch), 66 (ounces/inch), 118 (ounces/inch), 181 (ounces/inch), 115 (ounces/inch), 68 (ounces/inch), 67 (ounces/inch), 92 (ounces/inch), 65 (ounces/inch), 69 (ounces/inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 101 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 149 (oz./inch), 77 (ounces/inch), 133 (ounces/inch) Test Method
    Shear Strength (psi) Excellent, 55 (lbs.), 109, 2000 (grams), 1000 (grams), 500 (grams), 400 (grams), 200 (grams) Test Method
    Tensile Strength (psi) 51 Test Method
    Tape Properties
    Total Thickness (mm) 0.132
    Tape Backing 2 mil aluminum foil
    Material Resistance
    UV Resistance UV cabinet
    Environmental Resistance Excellent resistance to harsh environments
    High Temperature Resistance (°C) Excellent, 204, 149, Performs well after exposure to hot/cold cycles
    Low Temperature Resistance (°C) Performs well after exposure to hot/cold cycles, -35
    Moisture/Humidity Resistance Performs well after exposure to humidity
    Other Properties
    Glass Transition Temp (Tg) (°C) -35
    Coefficient of Thermal Expansion (CTE) 28 x 10(-5) (m/m/C), 72 x 10-5 (m/m/C), -6 x 10(-5) (m/m/C), 92 x 10(-5) (m/m/C) Test Method
    Business Information
    Shelf Life Details It is suggested that products are stored at room temperature conditions of 70°F (21°C) and 50% relative humidity.;If stored properly, product retains its performance and properties for 18 months from date of shipment., 24 months from the manufacturing date when stored at 70°F (21°C) and 50% relative humidity.
    Shelf Life Temperature (°F) 70, 70
    Shelf Life Type from date of shipment., From the manufacturing date
    Shelf Life (mon) 18, 24
    Not Good For
    Don't Use With low energy plastics, Polypropylene, polyethylene, Powder coated paints
  • Best Practices for 3M High Performance Adhesive Transfer 7955MP

    *See Terms of Use Below

    1. Surface Preparation

      For maximum bond strength (during installation of the final part) the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane (for oily surfaces) or isopropyl alcohol for plastics. Use reagent grade solvents since common household materials like rubbing alcohol frequently contain oils to minimize the drying affect on skin and can interfere with the performance of a pressure-sensitive adhesive.

      Note: Carefully read and follow the manufacturer’s precautions and directions for use when working with solvents. These cleaning recommendations may not be in compliance with the rules of certain air quality management Districts in California, consult applicable rules before use.

    2. Application

      It is necessary to provide pressure during lamination (1.5-20 pli recommended) and during final part installation (10-15 psi) to allow the adhesive to come into direct contact with the substrate. Using a hard edged plastic tool, which is the full width of the laminated part, helps to provide the necessary pressure at the point of lamination. Heat can increase bond strength when bonding to metal parts (generally this same increase is observed at room temperature over longer times, weeks). For plastic parts, the bond strength is not enhanced with the addition of heat.

      Application is not recommended if the surface temperature is below 50°F (10°C) because the adhesive becomes too firm to adhere readily. Once properly applied, at the recommended application temperature, low temperature holding is generally satisfactory.

      When bonding a thin, smooth, flexible material to a smooth surface, it is generally acceptable to use 2 mils of 3M™ Adhesive 200MP. If a texture is visible on one or both surfaces, the 5 mil 3M adhesive 200MP would be suggested. If both materials are rigid, it may be necessary to use a thicker adhesive to successfully bond the components.

      To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality.

  • Comparable Materials for 3M High Performance Adhesive Transfer 7955MP

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Plastic Bonding with Adhesives - Considerations Q&A

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M High Performance Adhesive Transfer 7955MP

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Shear Strength Test Methods
Shear Strength Type Substrate Test Time Test Temperature Test Method
Excellent
55 (lbs.) Lap shear strength aluminum Peak Load, ASTM D1002-72, (0.5 square inch on #6061 aluminum)
109 psi Lap shear strength Peak Stress, ASTM D1002-72
2000 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 23°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
1000 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 93°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
500 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 177°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
400 (grams) Static shear strength aluminum foil to stainless steel 3,600 sec 232°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
200 (grams) Static shear strength aluminum foil to stainless steel 600,000 sec 232°C ASTM D3654 - 1" x 1" sample area - aluminum foil to stainless steel, 2 mil
Tensile Strength Test Methods
Tensile Strength Test Method
51 psi ASTM D2370-82
Peel Strength Test Methods
Peel Strength Type Cure Time Cure Temperature Substrate Chemical Test Time Test Temperature Test Method
47 (ounces/inch) 90° Peel Strength 15 min 25°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
82 (ounces/inch) 90° Peel Strength 4,320 min 25°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
168 (ounces/inch) 90° Peel Strength 4,320 min 70°C Stainless Steel ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
77 (ounces/inch) 90° Peel Strength 4,320 min 25°C Aluminum ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
62 (ounces/inch) 90° Peel Strength 4,320 min 25°C ABS ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
61 (ounces/inch) 90° Peel Strength 4,320 min 25°C Acrylic ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
80 (ounces/inch) 90° Peel Strength 4,320 min 25°C Glass ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
58 (ounces/inch) 90° Peel Strength 4,320 min 25°C Polycarbonate ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
52 (ounces/inch) 90° Peel Strength 4,320 min 25°C Rigid PVC (Unplasticized) ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 2 mil
66 (ounces/inch) 90° Peel Strength 15 min 25°C Stainless Steel Adhesion Retention after Immersion and Exposure, gasoline - 1 hour RT immersion, 89% 60 min 25°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
118 (ounces/inch) 90° Peel Strength 4,320 min 25°C Stainless Steel Adhesion Retention after Immersion and Exposure, MEK - 1 hour RT immersion, 64% 60 min 25°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
181 (ounces/inch) 90° Peel Strength 4,320 min 70°C Stainless Steel Adhesion Retention after Immersion and Exposure, weak acid - 4 hour RT immersion, 86% 240 min 25°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
115 (ounces/inch) 90° Peel Strength 4,320 min 25°C Aluminum Adhesion Retention after Immersion and Exposure, weak base - 4 hour RT immersion, 84% 240 min 25°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
68 (ounces/inch) 90° Peel Strength 4,320 min 25°C ABS Adhesion Retention after Immersion and Exposure, oil (10W30) - 72 hour, 120°F (49°C) immersion, 146% 4,320 min 49°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
67 (ounces/inch) 90° Peel Strength 4,320 min 25°C Acrylic Adhesion Retention after Immersion and Exposure, water - 100 hours, 70°F (21°C), 105% 6,000 min 21°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
92 (ounces/inch) 90° Peel Strength 4,320 min 25°C Glass Adhesion Retention after Immersion and Exposure, salt water (5%) - 72 hours, 70°F (21°C), 105% 4,320 min 21°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
65 (ounces/inch) 90° Peel Strength 4,320 min 25°C Polycarbonate Adhesion Retention after Immersion and Exposure, warm/humid - 7 days, 90°F (32°C) and 90% relative humidity, 131% 7 (days),30 (days) 32°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
69 (ounces/inch) 90° Peel Strength 4,320 min 25°C Rigind PVC (Unplasticized) Adhesion Retention after Immersion and Exposure, UV cabinet - 30 days, 70°F (21°C), 147% 240 min 21°C ASTM D3330 modified (90° peel, 2 mil aluminum foil backing), 5 mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - I, 148% 240 min 70°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - II, 148% 960 min -29°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - III, 148% 60 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, gasoline - 1 hour RT immersion, 89% 60 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, MEK - 1 hour RT immersion, 64% 240 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, weak acid - 4 hour RT immersion, 86% 240 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, weak base - 4 hour RT immersion, 84% 4,320 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, oil (10W30) - 72 hour, 120°F (49°C) immersion, 146% 6,000 min 49°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, water - 100 hours, 70°F (21°C), 105% 4,320 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, salt water (5%) - 72 hours, 70°F (21°C), 105% 7 (days),30 (days) 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, warm/humid - 7 days, 90°F (32°C) and 90% relative humidity, 131% 240 min 32°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
101 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, UV cabinet - 30 days, 70°F (21°C), 147% 240 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 2 , mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - I, 148% 960 min 70°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - II, 148% 4,320 min -29°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Adhesion Retention after Immersion and Exposure, Temperature Cycle - III, 148% 4,320 min 21°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
149 (oz./inch) 90° Peel Strength 1,440 min 25°C Control is 24 hour RT dwell on stainless steel, 2 mil al foil backing, 90° peel, 12 ipm, 5 mil
77 (ounces/inch) 180° Peel Strength Stainless Steel ASTM D3330 modified (180° peel, 2 mil al foil), 2 mil (0.002 inches)
133 (ounces/inch) 180° Peel Strength Stainless Steel ASTM D3330 modified (180° peel, 2 mil al foil), 5 mil (0.005 inches)
Coefficient of Thermal Expansion (CTE) Test Methods
Coefficient of Thermal Expansion (CTE) CTE Test Method
28 x 10(-5) (m/m/C) first heat, ASTM D 696
72 x 10-5 (m/m/C) second heat, ASTM D 696
-6 x 10(-5) (m/m/C) first heat, ASTM D 696
92 x 10(-5) (m/m/C) second heat, ASTM D 696