3M Polyurethane Protective Tape 8544 Datasheet 3M Polyurethane Protective Tape 8544

CONTACT REP
Information provided by Gluespec

  • Description for 3M Polyurethane Protective Tape 8544

    A black tape made from and abrasion resistant polyurethane elastomer that resist puncture, tearing, abrasion, ultraviolet light and erosion.

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Solvent resistant
    Application Type Bond
    Material Form Tape
    Substrate Acrylic Enamel Paint, Plate Glass, Anodized Aluminum, Mil-P-23377 Epoxy Primer
    Industry Prevention of chaffing from rivets on aircraft fuel cells, Prevention of chaffing from rivets on aircraft fuel cells, Prevention of chaffing from rivets on aircraft fuel bladders, Prevention of chaffing from rivets on aircraft fuel bladders
    Manufacturer 3M
    Chemistry Acrylic adhesive, Polyurethane elastomer
    Cure Method Pressure Sensitive
    Color Black
    Total Thickness (mm) 0.230
    Single Sided Single sided
    Adhesive Thickness (mm) 0.080
    Polyethylene Liner Type: Polyethylene
    Puncture Resistance (g) Resist Puncture
    High Temperature Resistance (°C) <82
    Other Resistance Resist erosion
    Key Specifications Mil-Spec (United States Military Standard): Mil-P-23377 Epoxy Primer

  • Technical Data for 3M Polyurethane Protective Tape 8544

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance : Relative Solvent Resistance - Solvent resistant
    • Application Type
    • Material Form
      • Tape
    • Substrate
      • Glass - Plate Glass
      • Acrylic (PMMA) - Acrylic Enamel Paint
      • Epoxy - Mil-P-23377 Epoxy Primer
      • Anodized Aluminum
    • Industry
      • Rivet - Prevention of chaffing from rivets on aircraft fuel cells, Prevention of chaffing from rivets on aircraft fuel bladders
      • Aircraft - Prevention of chaffing from rivets on aircraft fuel bladders, Prevention of chaffing from rivets on aircraft fuel cells
    • Chemistry
    • Application Method
      • Contact
    • Cure Method
      • Pressure Sensitive (min) - Pressure Sensitive
    • Color
      • Black
    • Key Specifications
      • Mil-Spec (United States Military Standard) : P-23377 - Mil-P-23377 Epoxy Primer
    Specifications
    Bond Strength
    Peel Strength (piw) 65 (oz/in), 58 (oz/in), 29 (oz/in), 88 (oz/in) Test Method
    Tear Strength (piw) Resist tearing
    Tensile Strength (psi) 2,900 Test Method
    Tape Properties
    Total Thickness (mm) 0.230
    Single Sided Single sided
    Adhesive Thickness (mm) 0.080
    Material Resistance
    Non-Corrosive Protecting a surface from corrosion
    Puncture Resistance (g) Resist Puncture
    Abrasion Resistance Resists Abrasion
    UV Resistance Resistance to ultraviolet light
    High Temperature Resistance (°C) <82 Test Method
    Impact Resistance Protecting a surface from minor impact damage
    Other Resistance Resist erosion
    Hardness
    Elongation (%) 580 Test Method
    Business Information
    Shelf Life Details No special/hazardous labeling or packaging required and no regulations for air, ground or water shipment for this product. Keep film in clean area, away from excessive moisture and out of direct sunlight. Store rolls in the shipping carton. Return partially used rolls to shipping carton.
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 24

  • Best Practices for 3M Polyurethane Protective Tape 8544

    *See Terms of Use Below

  • Comparable Materials for 3M Polyurethane Protective Tape 8544

    *See Terms of Use Below

    Spec Engine® Results

    • 3M
      Single-Coated Urethane Foam Tape 4314(3M)

      A conformable, grey, low-density, opencell foam with pressure sensitive acrylic adhesive on one side.

    • 3M
      4318(3M)

      Adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized) as tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time.

    • 3M
      4317(3M)

      Adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized) as tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Characteristics of MMAs

Read Article

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M Polyurethane Protective Tape 8544

All 3M Materials
View Now
Aerospace Adhesive Tapes
View Now
Single Coated Tapes
View Now

Gluespec Poll

Which answer best describes a project you are currently working on?
Peel Strength Test Methods
Peel Strength Cure Time Cure Temperature Substrate Test Method
65 (oz/in) 1,440 min 21°C Plate Glass ASTM D3330, Method A
58 (oz/in) 1,440 min 21°C Anodized Aluminum ASTM D3330, Method A
29 (oz/in) 1,440 min 21°C Acrylic Enamel Paint ASTM D3330, Method A
88 (oz/in) 1,440 min 21°C Mil-P-23377 Epoxy Primer ASTM D3330, Method A
Tensile Strength Test Methods
Tensile Strength Test Method
2,900 psi ASTM D882, @ Break
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
<82°C Max. Service Temperature
Elongation Test Methods
Elongation Test Method
580 % ASTM D882, @ Break