3M Polyurethane Protective Tape 8681HS Datasheet 3M Polyurethane Protective Tape 8681HS

CONTACT REP
Information provided by Gluespec

  • Description for 3M Polyurethane Protective Tape 8681HS

    An abrasion-resistant polyurethane elastomer that resists punctures, tearing, abrasion and erosion. It is formulated for resistance to ultraviolet light.

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Solvent-resistant
    Application Type Bond
    Material Form Tape
    Substrate Acrylic enamel paint, Bare aluminum, Mil-P-23377 Epoxy Primer, ABS
    Manufacturer 3M
    Chemistry Acrylic adhesive, Polyurethane elastomer
    Cure Method Pressure sensitive
    Color Gray, Matte transparent
    Total Thickness (mm) 0.360
    Single Sided Single sided
    Adhesive Thickness (mm) 0.060
    Polyethylene Liner Type: Polyethylene
    Puncture Resistance (g) Resists punctures
    High Temperature Resistance (°C) <82
    Other Resistance Resists erosion
    Key Specifications Mil-Spec (United States Military Standard): Mil-P-23377 Epoxy Primer, Mil-Spec (United States Military Standard): Mil-PRF-85285

  • Technical Data for 3M Polyurethane Protective Tape 8681HS

    *See Terms of Use Below

    Overview
    • Chemical Resistance
      • Chemical Resistance : Relative Solvent Resistance - Solvent-resistant
    • Application Type
    • Material Form
      • Tape
    • Substrate
      • Aluminum - Bare aluminum
      • Acrylic (PMMA) - Acrylic enamel paint
      • Epoxy - Mil-P-23377 Epoxy Primer
      • ABS
    • Chemistry
    • Cure Method
      • Pressure Sensitive (min) - Pressure sensitive
    • Color
      • Clear / Transparent - Matte transparent
      • Gray
    • Key Specifications
      • Mil-Spec (United States Military Standard) : P-23377 - Mil-P-23377 Epoxy Primer
      • Mil-Spec (United States Military Standard) : PRF-85285 - Mil-PRF-85285
    Specifications
    Bond Strength
    Peel Strength (piw) 135 (oz/in), 52 (oz/in), 55 (oz/in), 90 (oz/in), 60 (oz/in) Test Method
    Tear Strength (piw) Resists tearing
    Tensile Strength (psi) 88 (lb/in) Test Method
    Tape Properties
    Total Thickness (mm) 0.360
    Single Sided Single sided
    Adhesive Thickness (mm) 0.060
    Material Resistance
    Non-Corrosive Protecting a surface from corrosion
    Puncture Resistance (g) Resists punctures
    Abrasion Resistance Resists abrasion
    UV Resistance Resistance to ultraviolet light
    Environmental Resistance Protect substrates from environmental damage
    High Temperature Resistance (°C) <82 Test Method
    Impact Resistance Protecting a surface from minor impact damage
    Other Resistance Resists erosion
    Hardness
    Elongation (%) 500 Test Method
    Business Information
    Shelf Life Details No special/hazardous labeling or packaging required and no regulations for air, ground or water shipment for this product. Keep film in clean area, away from excessive moisture and out of direct sunlight. Store rolls in the shipping carton. Return partially used rolls to shipping carton.
    Shelf Life Type From date of manufacture
    Shelf Life (mon) 24

  • Best Practices for 3M Polyurethane Protective Tape 8681HS

    *See Terms of Use Below

  • Comparable Materials for 3M Polyurethane Protective Tape 8681HS

    *See Terms of Use Below

    Spec Engine® Results

    • 3M
      4317(3M)

      Adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized) as tape adhesion is typically satisfactory within 20 minutes and continues to build with additional time.

    • 3M
      Polyurethane Protective Tape 8544(3M)

      A black tape made from and abrasion resistant polyurethane elastomer that resist puncture, tearing, abrasion, ultraviolet light and erosion.

    • 3M
      Polyurethane Protective Tape 8672(3M)

      A tough abrasion resistant polyurethane elastomer that resists punctures, tearing, abrasion and erosion. It is formulated for resistance to ultraviolet light.

    • Compare All
  Download Technical Data Sheet   Save This Material   Compare View Saved Items

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Instant Adhesives Guide

Read Article

Electronic Component Adhesives Guide

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M Polyurethane Protective Tape 8681HS

All 3M Materials
View Now

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Peel Strength Test Methods
Peel Strength Cure Temperature Substrate Test Method
135 (oz/in) 21°C Bare aluminum ASTM D-3330
52 (oz/in) 21°C Acrylic enamel paint ASTM D-3330
55 (oz/in) 21°C ABS Plastic ASTM D-3330
90 (oz/in) 21°C Mil-P-23377 Epoxy Primer ASTM D-3330
60 (oz/in) 21°C Mil-PRF-85285 ASTM D-3330
Tensile Strength Test Methods
Tensile Strength Test Method
88 (lb/in) ASTM D882, @ Break
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
<82°C Service temperature
Elongation Test Methods
Elongation Test Method
500 % ASTM D882, @ Break