3M Pressure Sensitive Adhesive 4213NF Datasheet 3M Pressure Sensitive Adhesive 4213NF

Information provided by Gluespec
  • Description for 3M Pressure Sensitive Adhesive 4213NF

    Resists staining and discoloration • Dries clear • Low VOCs

    *See Terms of Use Below

    Application Type Bond
    1 Part or 2 Part 1-Part
    Material Form Liquid
    Substrate Fabric, Steel, Wood, Vinyls, Canvas, 1/8 in. Birch
    Manufacturer 3M
    Chemistry Synthetic Resin
    Cure Method Solvent, Pressure Sensitive
    Application Temperature (°F) 64
    Viscosity (cPs) 2,500 to 5,000
    Color Clear, White
    High Temperature Resistance (°C) 107, 82
    Low Temperature Resistance (°C) -37
    Key Specifications TSCA, FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency): Acceptable Title 21 Code of Federal Regulations 175.105 (adhesives)
  • Technical Data for 3M Pressure Sensitive Adhesive 4213NF

    Overview
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Liquid
    • Substrate
      • Steel
      • Vinyl - Vinyls
      • Wood - 1/8 in. Birch
      • Fabric - Canvas
      • Other - Leather
    • Chemistry
      • Other - Synthetic Resin
    • Application Method
      • Dispenser - Lamination equipment
    • Cure Method
      • Pressure Sensitive (min) - Pressure Sensitive
      • Solvent
    • Color
      • Clear / Transparent - Clear
      • White
    • Key Specifications
      • TSCA (Toxic Substances Control Act) - TSCA
      • FDA (U.S. Food & Drug Administration) and/or CFIA (Canadian Food Inspection Agency) : 175.105 - Acceptable Title 21 Code of Federal Regulations 175.105 (adhesives)
    Specifications
    Cure Specs
    Application Temperature (°F) 64
    Viscosity (cPs) 2,500 to 5,000 Test Method
    Dry Time (min) 30 to 45
    Bond Strength
    Peel Strength (piw) 15, 24, 30, 35, 35, 27, 15, 20, 14, 8 to 15 Test Method
    Shear Strength (psi) 744, 488, 180, 136, 87, 78, 500 Test Method
    Material Resistance
    High Temperature Resistance (°C) 107, 82
    Low Temperature Resistance (°C) -37
    Other Properties
    % Solids (%) 54, 54 to 60
    Business Information
    Shelf Life Details Store product at 60-80°F (16-27°C) for maximum storage life. Higher temperatures reduce normal storage life. Lower temperatures cause increased viscosity of a temporary nature. Protect from freezing. Rotate stock on a “first in-first out” basis. When stored at the recommended temperatures in the original, unopened container, this product has a shelf life of 15 months from date of shipment by 3M.
    Shelf Life Temperature (°F) 61 to 81
    Shelf Life Type from date of shipment
    Shelf Life (mon) 15
    Not Good For
    Don't Use For Exterior applications.
  • Best Practices for 3M Pressure Sensitive Adhesive 4213NF

    *See Terms of Use Below

    1. Surface Preparation

      Surfaces must be free of dust, dirt, grease, oil, mold release materials and other contaminants.

    2. Application

      For best results, the temperature of the adhesive and the surfaces being bonded should be at least 65°F (18°C). Porous surfaces or porous surface to non-porous surface: Brush, roll or flow a uniform coat of adhesive to both surfaces. Not recommended for use on two non-porous surfaces.

    3. Curing

      Join within 5 minutes, clamp or apply moderate pressure. Allow to dry for at least 30-45 minutes before handling.

    4. Clean-Up

      Wet adhesive may be removed with warm water.

  • Comparable Materials for 3M Pressure Sensitive Adhesive 4213NF

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Testing the effectiveness of surface treatments

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Lightweighting drives automotive adhesives demand

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Top Catalog Pages for 3M Pressure Sensitive Adhesive 4213NF

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
Viscosity Test Methods
Viscosity Test Method Temperature
2,500 to 5,000 cPs RVF #4 sp. @ 20 rpm @ 80°F 62°C 62°C
Peel Strength Test Methods
Peel Strength Type Cure Time Cure Temperature Substrate Test Temperature Test Method
15 piw 180° Peel strength 1,440 min 24°C Canvas-Steel 24°C Width
24 piw 180° Peel strength 4,320 min 24°C Canvas-Steel 24°C Width
30 piw 180° Peel strength 7,200 min 24°C Canvas-Steel 24°C Width
35 piw 180° Peel strength 10,080 min 24°C Canvas-Steel 24°C Width
35 piw 180° Peel strength 20,160 min 24°C Canvas-Steel 24°C Width
27 piw 180° Peel strength 30,240 min 24°C Canvas-Steel 24°C Width
15 piw 180° Peel strength >30,240 min 24°C Canvas-Steel -37°C Width
20 piw 180° Peel strength >30,240 min 24°C Canvas-Steel 66°C Width
14 piw 180° Peel strength >30,240 min 24°C Canvas-Steel 82°C Width
8 to 15 piw 180° Peel strength 2,880 min 24°C Supported Vinyl-Wood 24°C Width
Shear Strength Test Methods
Shear Strength Type Cure Time Cure Temperature Substrate Test Temperature
744 psi Overlap shear strength >30,240 min 24°C 1/8 in. Birch/Birch -37°C
488 psi Overlap shear strength >30,240 min 24°C 1/8 in. Birch/Birch 24°C
180 psi Overlap shear strength >30,240 min 24°C 1/8 in. Birch/Birch 66°C
136 psi Overlap shear strength >30,240 min 24°C 1/8 in. Birch/Birch 82°C
87 psi Overlap shear strength >30,240 min 24°C 1/8 in. Birch/Birch 93°C
78 psi Overlap shear strength >30,240 min 24°C 1/8 in. Birch/Birch 107°C
500 psi Overlap shear strength 24°C Wood/Wood 24°C