3M Ribbon Sealant PF5422 Datasheet 3M Ribbon Sealant PF5422

Information provided by Gluespec
  • Description for 3M Ribbon Sealant PF5422

    Thread reinforced butyl • Dimensional stability, die-cutting • Repositionable with virtually no cleanup • Weather resistant

    *See Terms of Use Below

    Chemical Resistance Chemical Resistance: Fluid Resistance: Water
    Application Type Bond, Seal, Gaskets
    1 Part or 2 Part 1-Part
    Material Form Tape, Oil Soluble Elastomer
    Substrate Bare Aluminum, Glass, Metal
    Industry Window frames, Door Frames
    Manufacturer 3M
    Chemistry Thread-reinforced butyl, Oil Soluble Elastomer
    Application Method Knife coating
    Cure Method Pressure Sensitive
    Color Black
    Low Temperature Resistance (°C) -40
    Other Resistance Flow resistance
  • Technical Data for 3M Ribbon Sealant PF5422

    Overview
    • Chemical Resistance
      • Chemical Resistance : Fluid Resistance : Water Resistance - Water
    • Application Type
    • 1 Part or 2 Part
      • 1-Part
    • Material Form
      • Elastomer - Oil Soluble Elastomer
      • Tape
    • Substrate
    • Industry
      • Industrial - Mechanical, Mechanical Fasteners
      • Construction - Bedding, Building Panels, Overlap Seams, Rain Gutters
      • Construction Window - Window frames
      • Construction Door - Door Frames
    • Chemistry
      • Butyl - Thread-reinforced butyl
      • Other - Oil Soluble Elastomer
    • Application Method
      • Roll
      • Brush - Brushing
      • Flow - Flow equipment
      • Spatula/Trowel - Knife coating
    • Cure Method
      • Pressure Sensitive (min) - Pressure Sensitive
    • Color
      • Black
    Specifications
    Material Resistance
    Environmental Resistance Environmental resistance, Weather resistant, Outstanding
    Low Temperature Resistance (°C) -40
    Other Resistance Flow resistance
    Conductivity
    Filler Thread-reinforced
    Hardness
    Shore A Hardness 30 Test Method
    Elongation (%) 200
    Flexibility Excellent Low Temperature Flexibility
    Other Properties
    Specific Gravity 1.520 Test Method
    % Solids (%) 100
    Business Information
    Shelf Life Details Store product at 60-80°F (15-27°C) for maximum storage life. Higher temperatures reduce normal storage life. Rotate stock on a “first in-first out” basis.;When stored at the recommended conditions in the original unopened package, this product has a shelf life of 24 months.
    Shelf Life Temperature (°F) 59 to 81
    Shelf Life (mon) 24
  • Best Practices for 3M Ribbon Sealant PF5422

    *See Terms of Use Below

    1. Surface Preparation

      All surfaces to which 3M™ Weatherban™ Ribbon Sealant PF 5422 and PF 5423 are applied should be free from dust, dirt, grease or other contamination.

    2. Application

      All surfaces to which 3M™ Weatherban™ Ribbon Sealant PF 5422 and PF 5423 are applied should be free from dust, dirt, grease or other contamination. Temperature of the sealant and surfaces to be bonded should be 40°F (4°C) or above. Weatherban PF 5422 and PF 5423 are supplied in roll form on a liner. Lay or press the sealant in place, remove and discard the liner. Weatherban PF 5422 and PF 5423 have sufficient tack to adhere to most surfaces at temperatures as low as 40°F (4°C).

    3. Clean-Up

      Cleanup can be accomplished with a solvent such as 3M™ Scotch-Grip™ Solvent No. 2 or 3M™ Citrus Base Industrial Cleaner.*

      *Note: When using solvents, extinguish all ignition sources and follow the manufacturer’s precautions and directions for use.

  • Comparable Materials for 3M Ribbon Sealant PF5422

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

What Are the Differences Between Adhesives and Sealants?

Read Article

Learn how to bond and protect at the same time with this adhesive sealants Q&A primer

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Shore A Hardness Test Methods
Shore A Hardness Shore Hardness Test Method Hardness Temperature
30 (1/16" Thick Sealant), @75°F (24°C) 24°C
Specific Gravity Test Methods
Specific Gravity Test Method
1.520 Approx., By weight