3M Scotch Vinyl Electrical Tape 35

3M Scotch Vinyl Electrical Tape 35 Datasheet
  • Description for 3M Scotch Vinyl Electrical Tape 35

    • 7-mil thick • Cold weather application • Motor lead and piping systems • Insulation for electrical wiring • Excellent resistance to abrasion • Elastic PVC backing.

    *See Terms of Use Below

    Brand Scotch
    Application Type Bond
    Material Form Tape
    Substrate Steel
    Industry Synthetic jackets, Synthetic splicing compounds, Color coding of motor lead, Identifying cable on cell sites, Electrical conductors, Marking cable on cell sites, Insulation for electrical wiring
    Manufacturer 3M
    Chemistry Vinyl, Copolymers, Rubber-based, Flame Retardant
    Cure Method Pressure sensitive
    Color Blue, Brown, Gray, Green, Orange, Violet, Red, White, Yellow
    Chemical Resistance Alkalies, Acids
    High Temperature Resistance (°C) <105, 176
    Low Temperature Resistance (°C) -10
    Key Specifications CSA (Canadian Standards Association): C22.2: CSA C22.2 No. 197-M1983, CSA (Canadian Standards Association): C22.2: CSA Listed: CSA-C22.2 No.197 “PVC Insulating Tape”, File No. 048769, Class 9052-02, UL 510, UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL Listed: UL 510 Standard “Insulating Tape”, Category OANZ, File No. E129200
  • Technical Data for 3M Scotch Vinyl Electrical Tape 35

    Overview
    • Application Type
    • Material Form
      • Tape
    • Substrate
    • Industry
      • Electronics - Electrical conductors, Insulation for electrical wiring, Synthetic jackets
      • Industrial - Color coding of piping systems, Industrial environments
      • Splicing - Synthetic splicing compounds
      • Motors - Color coding of motor lead
      • Cable - Identifying cable on cell sites, Marking cable on cell sites
      • Other - Suitable for weather protected outdoor uses, Suitable for harsh indoor uses, Permanent phase identification, Commercial environments, Residential environments, Cold weather application
    • Chemistry
      • Tape Backing - PVC
      • Other - Vinyl, Copolymers, Rubber-based, Flame Retardant
    • Application Method
      • Contact
    • Cure Method
      • Pressure Sensitive (min) - Pressure sensitive
    • Color
      • Blue
      • Brown
      • Gray
      • Green
      • Orange
      • Purple - Violet
      • Red
      • White
      • Yellow
    • Key Specifications
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association) - UL 510
      • CSA (Canadian Standards Association): C22.2: No. 197-M1983 - CSA C22.2 No. 197-M1983, CSA Listed: CSA-C22.2 No.197 “PVC Insulating Tape”, File No. 048769, Class 9052-02
      • UL (Underwriters Laboratory), ULC (Underwriters Laboratories of Canada), NFPA (National Fire Protection Association): UL510 - UL Listed: UL 510 Standard “Insulating Tape”, Category OANZ, File No. E129200
    • Brand
      • Scotch
    Specifications
    Bond Strength
    General Bond Strength (psi) 20 (oz./n.), 20 (oz./n.) Test Method
    Tape Properties
    Total Thickness (mil) 7
    Single Sided Single sided
    Material Resistance
    Non-Corrosive Corrosion
    Abrasion Resistance Abrasion resistance
    Chemical Resistance Alkalies, Acids
    UV Resistance UV exposure
    Environmental Resistance Weather resistance
    High Temperature Resistance (°C) <105, 176
    Low Temperature Resistance (°C) -10
    Moisture/Humidity Resistance Moisture resistance
    Conductivity
    Insulation Resistance (O) >1 x 10(6), Insulation resistance Test Method
    Dielectric Strength (V/mil) Excellent electrical insulating, 1,250 Test Method
    Hardness
    Elasticity Elastic
    Elongation (%) 225 Test Method
    Business Information
    Shelf Life Details This product has a 5-year shelf life (from date of manufacture) when stored in humiditycontrolled storage (50°F/10°C to 80°F/27°C and <75% relative humidity).
    Shelf Life Temperature (°F) 50
    Shelf Life Type From the date of manufacture.
    Shelf Life (mon) 61
  • Best Practices for 3M Scotch Vinyl Electrical Tape 35

    *See Terms of Use Below

    1. Application

      The tape shall be applied in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the width of the tape to approximately 5/8 of its original width. On pigtail splice, the tape should be wrapped beyond the end of the wire and then folded back, leaving a protective cushion to resist cut-through. Wrap tape uphill, taping from a smaller diameter surface to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.

  • Comparable Materials for 3M Scotch Vinyl Electrical Tape 35

    *See Terms of Use Below

    Spec Engine® Results

Questions about this material?

Get personal assistance with your specific application needs.

Your Profile Edit
  1. a505f736-ac6f-4399-b49a-50f738519a9b
  2. a505f736-ac6f-4399-b49a-50f738519a9b

Popular Articles

Testing the effectiveness of surface treatments

Read Article

6 objects held together by adhesives you probably can't live without

Read Article

Lightweighting drives automotive adhesives demand

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

What level of expertise do you have in specialty chemicals like adhesives, sealants, conformal coatings, etc.?
General Bond Strength Test Methods
General Bond Strength Substrate Test Temperature Test Method
20 (oz./n.) Steel 23°C ASTM D1000 Test Method - properties measured at room temperature 73°F (23°C) unless otherwise stated
20 (oz./n.) 23°C ASTM D1000 Test Method - properties measured at room temperature 73°F (23°C) unless otherwise stated
Dielectric Strength Test Methods
Dielectric Strength Test Method
Excellent electrical insulating
1,250 V/mil ASTM D1000, Standard Condition
Insulation Resistance Test Methods
Insulation Resistance Test Method
>1 x 10(6) ASTM D1000, High Humidity megohms Method
Insulation resistance
Elongation Test Methods
Elongation Test Method
225 % ASTM D1000 Test Method - properties measured at room temperature 73°F (23°C) unless otherwise stated