3M Single-Coated Vinyl Foam Tape 4504 Datasheet 3M Single-Coated Vinyl Foam Tape 4504

Information provided by Gluespec
  • Description for 3M Single-Coated Vinyl Foam Tape 4504

    A flexible, black, medium-density with a pressure-sensitive acrylic adhesive on one side. It will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plasticized).

    *See Terms of Use Below

    Chemical Resistance Acetone, Chemical Resistance: MEK
    Application Type Bond
    Material Form Foam tape
    Substrate Acrylic, Aluminum, Glass, ABS, PVC (non-plasticized), Enameled steel, Stainless steel, Latex-painted wood, Lacquered wood
    Industry Dust and moisture seal for computers, Dust and moisture seal for electronic equipment, Dust and moisture seal for transportation equipment, Dust and moisture seal for copiers
    Manufacturer 3M
    Chemistry Acrylic adhesive
    Cure Method Pressure sensitive
    Application Temperature (°F) 70 to 100
    Color Black
    Single Sided Single-Coated
    Liner Thickness (mm) 0.080
    Total Thickness (mm) 6
    Tape Width (mm) 6
    Silicone/Silicone Paper Liner Type: Silicone treated paper liner
    Aging Resistance Excellent
    Fungus Resistance Mold resistance, Mildew resistance
    High Temperature Resistance (°C) 66, 121
    Low Temperature Resistance (°C) -18
    Other Resistance Seal out dust
    Durability Durable
    Compression Set (%) 15
    Density (g/cm³) High, 0.320
    Key Specifications Registered to ISO 9001 standards
    Tape Backing/Carrier Vinyl foam backing
  • Technical Data for 3M Single-Coated Vinyl Foam Tape 4504

    Overview
    • Chemical Resistance
      • Chemical Resistance - Acetone
      • Chemical Resistance : Relative Solvent Resistance - MEK
    • Application Type
    • Material Form
      • Foam - Foam tape
    • Substrate
    • Industry
      • Transportation - Dust and moisture seal for transportation equipment
      • Storage & Graphics - Dust and moisture seal for computers
      • Electronics - Dust and moisture seal for electronic equipment, Dust and moisture seal for copiers
      • Appliances - Dust and moisture seal for appliances
    • Chemistry
    • Application Method
      • Contact
    • Cure Method
      • Pressure Sensitive (min) - Pressure sensitive
    • Color
      • Black
    • Key Specifications
      • International Organization for Standardization - Registered to ISO 9001 standards
    • Tape Backing/Carrier
      • Vinyl - Vinyl foam backing
    Specifications
    Cure Specs
    Application Temperature (°F) 70 to 100
    Bond Strength
    General Bond Strength (psi) Good quick stick Test Method
    Tensile Strength (psi) 90 (lb/in²) Test Method
    Tape Properties
    Single Sided Single-Coated
    Liner Thickness (mm) 0.080
    Total Thickness (mm) 6
    Tape Width (mm) 6
    Material Resistance
    Aging Resistance Excellent
    Fungus Resistance Mold resistance, Mildew resistance Test Method
    UV Resistance Excellent
    High Temperature Resistance (°C) 66, 121 Test Method
    Low Temperature Resistance (°C) -18 Test Method
    Moisture/Humidity Resistance Seal out moisture
    Other Resistance Seal out dust
    Conductivity
    Dielectric Strength (V/mil) 50 Test Method
    Thermal Conductivity (W/m°K) 0.04 Test Method
    Surface Resistivity (O) 1e11 (ohms/sq), 2e11 (ohms/sq) Test Method
    Hardness
    Durability Durable
    Compression Set (%) 15 Test Method
    Elongation (%) 200 Test Method
    Shore OO Hardness 50 Test Method
    Flexibility Remain flexible when exposed to elevated temperatures
    Other Properties
    Density (g/cm³) High, 0.320 Test Method
    Business Information
    Shelf Life Details Storage: Store in the original cartons at 60-80°F (15-27°C) and 50% relative humidity.
    Shelf Life Temperature (°F) 140 to 176
    Shelf Life Type From date of manufacture.
    Shelf Life (mon) 18
  • Best Practices for 3M Single-Coated Vinyl Foam Tape 4504

    *See Terms of Use Below

    1. Surface Preparation

      To obtain optimum adhesion, the bonding surface must be clean, dry, and well unified. Some typical surface cleaning solvents are isopropyl alcohol and heptane.

      Be sure to follow the solvent manufacturer’s precautions and directions for use when handling solvents.

    2. Application

      Bond strength is dependent upon the amount of adhesive-to-surface contact. Firm application pressure develops better adhesive contact and helps improve bond strength.

      Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended because the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.

  • Comparable Materials for 3M Single-Coated Vinyl Foam Tape 4504

    *See Terms of Use Below

    Spec Engine® Results

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Testing the effectiveness of surface treatments

Read Article

Plastic Bonding with Adhesives - Considerations Q&A

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article

Featured Ads

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
General Bond Strength Test Methods
General Bond Strength Cure Time
Good quick stick 20 min
Tensile Strength Test Methods
Tensile Strength Test Method
90 (lb/in²) ASTM D3574, Die "A"
Low Temperature Resistance Test Methods
Low Temperature Resistance Test Method
-18°C Cold flex, No cracks. Tape slowly bent around a 1/4 in. diameter mandrel
High Temperature Resistance Test Methods
High Temperature Resistance Test Method
66°C Long Term (day, weeks)
121°C Short term temperature resistance
Fungus Resistance Test Methods
Fungus Resistance Test Method
Mold resistance No growth after 28 days, ASTM G21, Foam with adhesive
Mildew resistance No growth after 28 days, ASTM G21, Foam with adhesive
Dielectric Strength Test Methods
Dielectric Strength Test Method
50 V/mil ASTM D-149
Thermal Conductivity Test Methods
Thermal Conductivity Test Method
0.04 W/m°K ASTM C-518
Surface Resistivity Test Methods
Surface Resistivity Test Method
1e11 (ohms/sq) Non-adhesive side, ASTM D-257
2e11 (ohms/sq) Adhesive side, ASTM D-257
Elongation Test Methods
Elongation Test Method
200 % ASTM D-3574, Die “A”
Shore OO Hardness Test Methods
Shore OO Hardness Shore Hardness Test Method
50 ASTM D-2240, Foam with adhesive
Compression Set Test Methods
Compression Set Test Method
15 % ASTM D1667
Density Test Methods
Density Test Method
High
0.320 g/cm³ ASTM D-3574, Foam with adhesive