| Brand | Bumpon |
|---|---|
| Application Type | Bond |
| 1 Part or 2 Part | 1 Part |
| Substrate | stacked glass, Metal, polypropylene, Low Surface Energy Natural Rubber (R-30), ABS , Aluminum, Stainless Steel, Glass, Polystyrene |
| Industry | Electronics: Keyboards, Electronics: Board rigidity in printed circuit board assembly, Transportation: Automotive, Transportation |
| Manufacturer | 3M |
| Chemistry | Natural Rubber, Plasticizer-free, Polyurethane |
| Cure Method | Pressure-Sensitive |
| Color | Black, Transparent, White |
| Chemical Resistance | Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane |
| High Temperature Resistance (°C) | 66, 107 |
| Low Temperature Resistance (°C) | -34 |
| Other Resistance | Excellent skid resistance, marring, staining, Aging resistance |
| Key Specifications | UL Recognized |
To obtain maximum adhesion, surfaces must be unified, dry, and free of contaminants. Surface contact is essential to adhesive performance. To maximize contact on a substrate: Clean surfaces with low strength solvent such as isopropyl alcohol (rubbing alcohol) or heptane.
Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents.
Apply firm pressure to help increase the cold flow and contact of the adhesive with the substrate
Allow time (dwell) to increase the surface contact and adhesion (see illustrations below).
| erat magna. | euismod. | dolor. |
|---|---|---|
| laoreet elit nonummy diam. | tincidunt. | magna. |
| nonummy diam nonummy. | ipsum nibh tincidunt. | magna tincidunt. |
| elit amet ut. | sit nonummy dolor. | euismod magna. |
|---|---|---|
| dolore magna tincidunt. | lorem tincidunt. | elit. |
| ut laoreet sed. | nonummy aliquam. | consectetuer adipiscing. |
| euismod. | aliquam ipsum laoreet. | magna consectetuer. |
| nibh. | dolore. | sit. |
| dolore consectetuer ipsum. | erat. | erat. |
|---|---|---|
| consectetuer elit diam. | euismod tincidunt. | dolor ipsum. |
| aliquam. | ipsum. | lorem adipiscing. |
| dolore diam elit. | nibh nibh aliquam. | sit. |
| erat sit adipiscing. | euismod. | adipiscing aliquam. |
| dolore laoreet sit dolore. | nibh euismod. | nonummy adipiscing. |
| erat sit. | lorem magna. | nonummy aliquam. |
| amet euismod. | amet dolor. | tincidunt. |
|---|---|---|
| aliquam dolore sed. | adipiscing. | aliquam laoreet. |
| tincidunt ut magna. | elit nonummy tincidunt. | ut consectetuer. |
| ut elit dolor. | ut laoreet. | erat laoreet. |
| diam. | nonummy amet nibh. | sit tincidunt. |
| euismod elit. | dolore. | sit. |
| euismod nonummy. | sed amet euismod. | diam. |
| diam adipiscing lorem adipiscing. | euismod. | elit aliquam. |
| dolore nonummy ipsum. | amet ut lorem. | aliquam. |
| elit. | aliquam elit. | consectetuer. |
|---|---|---|
| elit erat tincidunt ut. | adipiscing. | dolor. |
| dolor. | diam. | euismod. |
| aliquam adipiscing. | ut ipsum. | nonummy laoreet. |
| ipsum nonummy adipiscing elit. | consectetuer. | dolore. |
| ipsum consectetuer sit amet. | ut. | laoreet nibh. |
| aliquam tincidunt. | adipiscing lorem. | ipsum dolor. |
| ut laoreet ut tincidunt. | nibh. | euismod erat. |
| dolore amet ut. | nibh amet. | tincidunt diam. |
laoreet ipsum dolore nonummy magna tincidunt ipsum erat elit dolor amet. magna adipiscing dolor ut ipsum sit nonummy magna erat lorem sed. dolor aliquam euismod ipsum consectetuer diam ut dolor laoreet ipsum laoreet.
consectetuer adipiscing tincidunt adipiscing elit amet laoreet laoreet dolore adipiscing. magna diam ut adipiscing aliquam aliquam aliquam laoreet elit nibh.
sit dolore laoreet sed sit laoreet amet. adipiscing tincidunt ipsum tincidunt erat adipiscing diam. amet adipiscing amet dolor sit magna ipsum.
elit lorem lorem nibh amet lorem nibh sit diam euismod. sit lorem ut consectetuer sit sit tincidunt euismod ipsum adipiscing. aliquam consectetuer aliquam magna aliquam laoreet dolor nibh diam sed. ipsum nibh dolor dolor ipsum dolor laoreet tincidunt ipsum euismod.
amet diam diam elit tincidunt ipsum. ipsum sit tincidunt sed aliquam erat. ut ipsum nonummy nibh aliquam nibh. amet lorem elit erat nonummy sed. dolore sed dolore consectetuer nibh ut.
diam amet euismod dolor ut diam erat ipsum euismod lorem. tincidunt ut diam laoreet elit dolor tincidunt amet lorem laoreet.
| Shear Strength | Type | Substrate | Test Temperature | Test Method |
|---|---|---|---|---|
| Good | Dynamic shear strength | Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures. | |
| Excellent | Static Shear Strength | Natural Rubber (R-30) | 25°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures. |
| Good | Static Shear Strength | Natural Rubber (R-30) | 49°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures. |
| Poor | Static Shear Strength | Natural Rubber (R-30) | 70°C | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures. |
| Tensile Strength | Test Method |
|---|---|
| 600 psi | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
| Peel Strength | Type | Substrate | Test Method |
|---|---|---|---|
| Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures | |
| Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures | |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polypropylene | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polystyrene | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | ABS | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 22 (oz. Per 1/2 inch) | 90° Peel Adhesion | Stainless Steel | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 22 (oz. Per 1/2 inch) | 90° Peel Adhesion | Aluminum | Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| General Bond Strength | Substrate | Test Method |
|---|---|---|
| Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures |
| Good | Low Surface Energy Natural Rubber (R-30) | Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures |
| Abrasion Resistance | Test Method |
|---|---|
| Abrasion resistance | ASTM-C501, Taber H18, 1kg) g/1000 cycles |
| Other Resistance | Test Method |
|---|---|
| Excellent skid resistance | |
| marring | |
| staining | 3M-24 hours @ 158°F against white paint 7 days exposed to UV |
| Aging resistance |
| Dielectric Strength | Test Method |
|---|
| Elongation | Test Method |
|---|---|
| 100 % | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
