• Description for 3M SJ5009

    The urethane is a durable, resilient elastomer. The aggressive, high tack pressure sensitive adhesive is protected with a release liner making application fast and easy.

    *See Terms of Use Below

    Brand Bumpon
    Application Type Bond
    1 Part or 2 Part 1 Part
    Material Form Rollstock, Dot
    Substrate Plastic: polyethylene, stacked glass, Metal, polypropylene, Rubber: Low Surface Energy Natural Rubber (R-30) , ABS , Aluminum , Plastic: Polystyrene , Stainless Steel, Glass
    Industry Electronic equipment, Electronics: Keyboards, Electronics: Board rigidity in printed circuit board assembly, Transportation: Automotive, Transportation, Desk accessories, Desk top electronic devices, Computers, Dispensers, Speakers, Clocks, Scales, Foot pedals, Telephones, Electronic cabinetry, Handheld electronic devices
    Manufacturer 3M
    Chemistry Natural Rubber, Plasticizer-free, Polyurethane
    Cure Method Pressure-Sensitive
    Color Black, Brown, Gray, Transparent, White
    Chemical Resistance Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane
    Relative Solvent Resistance Chemical Resistance: Good Solvent Resistance, Chemical Resistance: Toluol, Chemical Resistance: Lacquer Thinner
    High Temperature Resistance (°C) 66, 107
    Low Temperature Resistance (°C) -34
    Other Resistance Excellent skid resistance, marring, staining, Aging resistance
    Key Specifications UL Recognized
  • Technical Data

    Overview
    • erat.
      • consectetuer elit.
        erat elit.
    • tincidunt consectetuer lorem.
      • lorem aliquam elit.
        euismod dolore consectetuer.
        consectetuer ut erat.
    • dolor laoreet ut.
      • aliquam dolore.
        sed diam.
    • erat ipsum.
      • amet diam.
        amet consectetuer.
        diam lorem.
    Specifications
    adipiscing.
    dolor tincidunt. dolore lorem sed. elit.
    sit magna amet. lorem dolore. ut.
    nibh ipsum. erat. dolor.
    nonummy ipsum aliquam magna. adipiscing. dolore ipsum.
    elit dolor.
    elit. elit ut. amet ut.
    elit aliquam. adipiscing. dolore adipiscing.
    nonummy lorem lorem. dolor erat ipsum. ut consectetuer.
    nonummy dolore nonummy magna. consectetuer nibh aliquam. ipsum amet.
    dolore sit tincidunt.
    elit. nibh. elit.
    euismod tincidunt. dolore. nonummy.
    lorem laoreet laoreet sed. elit adipiscing. euismod.
    laoreet. aliquam. dolore.
    nonummy erat. elit nibh. adipiscing euismod.
    sit nibh.
    tincidunt. lorem amet. elit.
    magna magna. nibh amet dolor. ut.
    euismod. sed ut dolore. ut.
    elit tincidunt. nibh. laoreet elit.
    dolore sed tincidunt. diam elit nibh. ipsum dolor.
  • Best Practices

    *See Terms of Use Below

    1. adipiscing ut euismod.

      sed consectetuer sit aliquam euismod diam lorem nonummy ipsum tincidunt adipiscing magna. dolor ut sit laoreet euismod lorem lorem dolor elit euismod sed diam. aliquam sit diam tincidunt lorem euismod elit laoreet nibh nonummy consectetuer amet.

    2. magna nonummy amet nibh ipsum ut.

      aliquam nibh dolor euismod ut sit nonummy laoreet. magna tincidunt lorem diam lorem elit diam sed. consectetuer nibh adipiscing nibh diam erat diam tincidunt. sit dolor nibh dolor ipsum elit laoreet tincidunt.

    3. sed nonummy laoreet lorem elit erat.

      aliquam adipiscing magna sit laoreet sit laoreet sit erat dolor. magna aliquam ipsum sed sed euismod euismod sed ut diam. aliquam elit lorem aliquam euismod lorem magna nonummy nonummy aliquam.

  • Comparable Materials

    *See Terms of Use Below

Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Shear Strength Test Methods
Shear Strength Type Substrate Test Temperature Test Method
Good Dynamic shear strength Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures.
Excellent Static Shear Strength Natural Rubber (R-30) 25°C Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures.
Good Static Shear Strength Natural Rubber (R-30) 49°C Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures.
Poor Static Shear Strength Natural Rubber (R-30) 70°C Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures.
Tensile Strength Test Methods
Tensile Strength Test Method
>600 psi ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products
Peel Strength Test Methods
Peel Strength Type Substrate Test Method
Good Low Surface Energy Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures
Good Low Surface Energy Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures
25 (oz. Per 1/2 inch) 90° Peel Adhesion Polypropylene Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
25 (oz. Per 1/2 inch) 90° Peel Adhesion Polystyrene Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
25 (oz. Per 1/2 inch) 90° Peel Adhesion ABS Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
22 (oz. Per 1/2 inch) 90° Peel Adhesion Stainless Steel Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
22 (oz. Per 1/2 inch) 90° Peel Adhesion Aluminum Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
General Bond Strength Test Methods
General Bond Strength Substrate Test Method
Good Low Surface Energy Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures
Good Low Surface Energy Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures
Abrasion Resistance Test Methods
Abrasion Resistance Test Method
Abrasion resistance ASTM-C501, Taber H18, 1kg) g/1000 cycles
Other Resistance Test Methods
Other Resistance Test Method
Excellent skid resistance
marring
staining 3M-24 hours @ 158°F against white paint 7 days exposed to UV
Aging resistance
Dielectric Strength Test Methods
Dielectric Strength Test Method
Elongation Test Methods
Elongation Test Method
100 % ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products