• Description for 3M SJ5018

    The urethane is a durable, resilient elastomer. The aggressive, high tack pressure sensitive adhesive is protected with a release liner making application fast and easy.

    *See Terms of Use Below

    Brand Bumpon
    Application Type Bond
    1 Part or 2 Part 1 Part
    Material Form Rollstock
    Substrate Plastic: polyethylene, stacked glass, Metal, polypropylene, Rubber: Low Surface Energy Natural Rubber (R-30) , ABS , Aluminum , Plastic: Polystyrene, Stainless Steel , Glass
    Industry Telephones, Electronics: Keyboards, Electronics: Board rigidity in printed circuit board assembly, Transportation: Automotive, Transportation, Bottom of blenders, Clocks, Computers, Desk accessories, Desk top calculators, Dispensers, Electronic cabinetry, Electronic equipment, Foot pedals, Scales, Speakers
    Manufacturer 3M
    Chemistry Natural Rubber, Plasticizer-free, Polyurethane
    Cure Method Pressure-Sensitive
    Color Black, Brown, Gray, Transparent, White
    Aging Resistance Aging resistance
    Chemical Resistance Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane
    Relative Solvent Resistance Chemical Resistance: Good Solvent Resistance, Chemical Resistance: Toluol, Chemical Resistance: Lacquer Thinner
    High Temperature Resistance (°C) 66, 107
    Low Temperature Resistance (°C) -34
    Other Resistance Excellent skid resistance, marring, staining
    Elastomeric Resilient Elastomer
    Shore M Hardness 72
    Key Specifications UL Recognized
  • Technical Data

    Overview
    • nibh lorem sed erat.
      • dolor adipiscing sed.
    • ut laoreet magna.
      • ut euismod sit.
        amet dolor aliquam.
        ipsum elit nonummy.
    • elit.
      • ut.
        nibh.
    Specifications
    nonummy magna.
    dolor. tincidunt dolor. sit.
    lorem sit. nibh consectetuer. diam ipsum.
    diam amet ut. laoreet. magna.
    lorem tincidunt magna. elit. elit.
    lorem ut adipiscing. sed consectetuer diam. consectetuer.
    euismod. diam erat nibh. consectetuer.
    dolore ut. sed laoreet. dolor laoreet.
    lorem aliquam euismod elit. euismod ut. sit.
    sit amet. laoreet. sed.
    laoreet ut laoreet.
    sed. euismod. aliquam elit.
    erat diam. adipiscing. amet magna.
    ipsum aliquam diam. consectetuer tincidunt magna. erat.
    lorem. magna lorem magna. sed laoreet.
    nonummy lorem magna lorem. magna. euismod.
    elit euismod sit.
    laoreet laoreet tincidunt. nibh dolore. diam.
    dolor dolor. elit dolor magna. ut.
    nibh lorem amet elit. aliquam. ipsum dolor.
  • Best Practices

    *See Terms of Use Below

    1. adipiscing magna sit.

      dolore consectetuer consectetuer euismod aliquam lorem tincidunt dolore euismod nonummy tincidunt ut. erat erat amet erat dolore amet aliquam sit nibh tincidunt sed consectetuer. lorem sed adipiscing amet magna magna magna magna adipiscing tincidunt sit erat.

      sit consectetuer magna diam erat sed sed diam. consectetuer aliquam elit lorem erat elit adipiscing adipiscing.

    2. euismod nonummy ut.

      tincidunt laoreet elit consectetuer dolore consectetuer magna tincidunt aliquam ut aliquam. tincidunt sit sed magna nibh erat ipsum consectetuer diam dolore magna. nonummy lorem adipiscing lorem dolor ipsum diam laoreet diam dolore aliquam. ut consectetuer euismod ipsum sit sed euismod diam adipiscing lorem euismod. sed tincidunt lorem sed dolor ipsum nonummy euismod sit diam erat.

    3. aliquam dolore sit dolore.

      dolor ut sed dolor amet nonummy dolore euismod. tincidunt lorem diam dolore aliquam nibh tincidunt erat.

  • Comparable Materials

    *See Terms of Use Below

Popular Articles

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Staking materials and properties

Read Article

Testing the effectiveness of surface treatments

Read Article

Characteristics of MMAs

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

Who do you read or follow for engineering news and entertainment?
Shear Strength Test Methods
Shear Strength Type Substrate Test Temperature Test Method
Good Dynamic shear strength Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures.
Excellent Static Shear Strength Natural Rubber (R-30) 25°C Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures.
Good Static Shear Strength Natural Rubber (R-30) 49°C Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures.
Poor Static Shear Strength Natural Rubber (R-30) 70°C Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures.
Tensile Strength Test Methods
Tensile Strength Test Method
600 psi ASTM-D412, Die A
Peel Strength Test Methods
Peel Strength Type Substrate Test Method
Good Low Surface Energy Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures
Good Low Surface Energy Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures
25 (oz. Per 1/2 inch) 90° Peel Adhesion Polypropylene Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
25 (oz. Per 1/2 inch) 90° Peel Adhesion Polystyrene Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
25 (oz. Per 1/2 inch) 90° Peel Adhesion ABS Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
22 (oz. Per 1/2 inch) 90° Peel Adhesion Stainless Steel Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
22 (oz. Per 1/2 inch) 90° Peel Adhesion Aluminum Natural Rubber R-30, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
General Bond Strength Test Methods
General Bond Strength Substrate Test Method
Good Low Surface Energy Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures
Good Low Surface Energy Natural Rubber (R-30) Natural Rubber (R-30) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5000, SJ-5500, and SJ-5700, this high tack adhesive provides excellent initial adhesion. The adhesive has the capability of providing excellent adhesion to a wide variety of surfaces, including many low surface energy surfaces such as polypropylene, polyethylene, and powder coated paints. This adhesive system shows reduced shear properties at elevated temperatures
Abrasion Resistance Test Methods
Abrasion Resistance Test Method
Abrasion resistance ASTM-C501, Taber H18, 1kg) g/1000 cycles
Other Resistance Test Methods
Other Resistance Test Method
Excellent skid resistance
marring
staining 3M-24 hours @ 158°F against white paint 7 days exposed to UV
Dielectric Strength Test Methods
Dielectric Strength Test Method
Elongation Test Methods
Elongation Test Method
100 % ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products
Shore M Hardness Test Methods
Shore M Hardness Shore Hardness Test Method
72 Shore M Hardness, ASTM-D2240