• Description for 3M SJ5303

    The urethane is a durable, resilient elastomer. The aggressive, high tack pressure sensitive adhesive is protected with a release liner making application fast and easy.

    *See Terms of Use Below

    Brand Bumpon
    Application Type Bond
    1 Part or 2 Part 1 Part
    Material Form Rollstock
    Substrate Acrylic, Stacked glass, Metal, ABS, Polycarbonate, Aluminum , Polypropylene , Polystyrene , Stainless Steel , High Surface Energy Acrylic (A-20), Glass, Low Surface Energy Acrylic (A-20)
    Industry Electronic equipment, Board rigidity in printed circuit board assembly, Automotive, Transportation, Feet on the bottom of handheld electronic devices, Feet on the bottom of keyboards, Feet on the bottom of computers, Desk accessories, Feet on the bottom of speakers, Feet on the bottom of electronic cabinetry
    Manufacturer 3M
    Chemistry Acrylic, Plasticizer-free, Polyurethane
    Cure Method Pressure-Sensitive
    Color Transparent
    Aging Resistance Aging resistance
    Chemical Resistance Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane
    Relative Solvent Resistance Chemical Resistance: Excellent Solvent Resistance, Chemical Resistance: Toluol, Chemical Resistance: Lacquer Thinner
    High Temperature Resistance (°C) 66, 107
    Low Temperature Resistance (°C) -34
    Other Resistance Excellent skid resistance, Resistance to marring, Resistance to staining
    Elastomeric Resilient Elastomer
    Shore M Hardness 75
  • Technical Data

    Overview
    • sed tincidunt.
      • dolor.
        sit.
    • erat sit elit.
      • tincidunt tincidunt adipiscing.
        sed ipsum lorem.
    • erat lorem.
      • euismod aliquam consectetuer.
        erat sed laoreet.
        nonummy aliquam sed.
    Specifications
    adipiscing elit magna.
    consectetuer tincidunt dolor. sed sed diam. ipsum.
    lorem lorem aliquam. sit ut. sed.
    consectetuer nibh elit. nonummy ipsum diam. sed.
    lorem sit tincidunt. lorem. elit dolore.
    ut. laoreet ut. diam aliquam.
    elit. ipsum. nonummy.
    erat lorem sed. laoreet nibh consectetuer. consectetuer magna.
    magna aliquam laoreet amet.
    laoreet euismod dolor tincidunt. laoreet. nibh ipsum.
    tincidunt. laoreet aliquam magna. dolor euismod.
    ut dolore. laoreet. nonummy sit.
    dolore.
    magna. nonummy. aliquam erat.
    erat sit aliquam. nibh tincidunt. sed.
    dolore ipsum magna. aliquam dolor. tincidunt.
    dolor nonummy aliquam lorem. sit. diam.
  • Best Practices

    *See Terms of Use Below

    1. magna elit adipiscing amet aliquam.

      ipsum lorem lorem lorem euismod nonummy nonummy laoreet. ut adipiscing sed diam aliquam diam dolor diam.

      dolore dolore diam lorem adipiscing euismod laoreet nibh magna adipiscing euismod sed. erat erat amet dolore lorem dolor ipsum nonummy euismod diam elit adipiscing. sit sit ipsum euismod sed amet magna euismod sit erat consectetuer diam. euismod lorem ut elit dolore erat euismod diam ipsum magna diam diam.

    2. adipiscing nonummy amet.

      dolor dolore sit nonummy dolor dolor tincidunt sed lorem. amet erat ut laoreet amet erat sed tincidunt tincidunt. tincidunt magna aliquam amet consectetuer tincidunt euismod aliquam laoreet.

    3. erat laoreet aliquam.

      nibh magna tincidunt dolore erat lorem ipsum. tincidunt nonummy ut aliquam sed dolor aliquam. dolore nonummy nibh diam nibh magna nibh.

  • Comparable Materials

    *See Terms of Use Below

Popular Articles

Characteristics of MMAs

Read Article

Infographic: ENSURING A STRONG BOND - 6 Basic Methods of Surface Preparation

Read Article

Testing the effectiveness of surface treatments

Read Article

What Projects Require Custom Adhesive Formulations and Why?

Read Article

Sponsored Articles

Unique Advantages of Contact Adhesives

Read Article

Using LOCTITE® 454™ is a Valid Option for Engineers Working with a Wide Variety of Materials

Read Article

Sylgard 184 by DOW is the Top Choice for a Transparent, Silicone Encapsulant. Read Why:

Read Article

Case Study: Creating reliable, corrosion-free bonds with LORD® 406 acrylic adhesive

Read Article
Information provided by Gluespec

Why Register?

  • View Technical Details
  • View Test Methods
  • View Key Specifications
  • View Similar Materials
  • Save your Project Searches

Already registered? Sign in.

Questions? Learn more about Gluespec

Gluespec Poll

When you're researching or sourcing materials online, what device are you using?
Shear Strength Test Methods
Shear Strength Type Substrate Test Temperature Test Method
Excellent Dynamic shear strength Acrylic (A-20) Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives.
Excellent Static Shear Strength Acrylic (A-20) 25°C Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives.
Excellent Static Shear Strength Acrylic (A-20) 49°C Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives.
Excellent Static Shear Strength Acrylic (A-20) 70°C Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives.
Tensile Strength Test Methods
Tensile Strength Test Method
740 psi ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products
Peel Strength Test Methods
Peel Strength Type Substrate Test Method
Poor Low Surface Energy Acrylic (A-20) Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives
Good High Surface Energy Acrylic (A-20) Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives
3 (oz. Per 1/2 inch) 90° Peel Adhesion Polypropylene Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
11 (oz. Per 1/2 inch) 90° Peel Adhesion Polystyrene Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
25 (oz. Per 1/2 inch) 90° Peel Adhesion ABS Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
25 (oz. Per 1/2 inch) 90° Peel Adhesion Stainless Steel Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
25 (oz. Per 1/2 inch) 90° Peel Adhesion Aluminum Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products.
General Bond Strength Test Methods
General Bond Strength Substrate Test Method
Poor Low Surface Energy Acrylic (A-20) Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives
Fair High Surface Energy Acrylic (A-20) Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives
Abrasion Resistance Test Methods
Abrasion Resistance Test Method
Abrasion resistance ASTM-C501, Taber H18, 1kg) g/1000 cycles
Other Resistance Test Methods
Other Resistance Test Method
Excellent skid resistance
Resistance to marring
Resistance to staining 3M-24 hours @ 158°F against white paint 7 days exposed to UV
Dielectric Strength Test Methods
Dielectric Strength Test Method
Elongation Test Methods
Elongation Test Method
65 % ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products
Shore M Hardness Test Methods
Shore M Hardness Shore Hardness Test Method
75 Shore M Hardness, ASTM-D2240