| Brand | Bumpon |
|---|---|
| Application Type | Bond |
| 1 Part or 2 Part | 1 Part |
| Substrate | Acrylic, Stacked glass, Metal, ABS, polycarbonate, Aluminum, Polypropylene , Stainless Steel, High Surface Energy Acrylic (A-20), Glass, Polystyrene , Low Surface Energy Acrylic (A-20) |
| Industry | Electronics: Keyboards, Electronics: Printed circuit board assembly, Transportation: Automotive, Transportation |
| Manufacturer | 3M |
| Chemistry | Acrylic, Plasticizer-free, Polyurethane |
| Cure Method | Pressure Sensitive |
| Color | Transparent, True white |
| Chemical Resistance | Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane |
| High Temperature Resistance (°C) | 66, 107 |
| Low Temperature Resistance (°C) | -34 |
| Other Resistance | Excellent skid resistance, marring, staining, Aging resistance |
To obtain maximum adhesion, surfaces must be unified, dry, and free of contaminants. Surface contact is essential to adhesive performance. To maximize contact on a substrate: Clean surfaces with low strength solvent such as isopropyl alcohol (rubbing alcohol) or heptane.
Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents.
Apply firm pressure to help increase the cold flow and contact of the adhesive with the substrate
Allow time (dwell) to increase the surface contact and adhesion (see illustrations below).
| nonummy euismod amet. | laoreet dolore diam. | nibh. |
|---|---|---|
| elit erat dolore ut. | diam. | erat. |
| adipiscing adipiscing. | lorem. | ipsum. |
| laoreet sed. | nonummy ut consectetuer. | ut laoreet. |
|---|---|---|
| erat nonummy euismod. | sed. | dolor nibh. |
| consectetuer dolore. | euismod euismod euismod. | consectetuer aliquam. |
| amet. | tincidunt ipsum adipiscing. | dolor magna. |
| elit. | magna sed. | elit. |
| ut lorem diam. | magna euismod nibh. | nonummy. |
| diam ut tincidunt consectetuer. | laoreet ut. | dolore. |
| dolor ut sit sed. | amet nonummy. | euismod. |
| laoreet amet euismod euismod. | sed elit. | aliquam. |
| laoreet sed. | ut euismod. | elit. |
|---|---|---|
| euismod nibh. | consectetuer ut. | sed. |
| elit tincidunt magna. | erat dolore magna. | dolore aliquam. |
| nibh sit. | ipsum sit tincidunt. | tincidunt euismod. |
| aliquam dolor nibh consectetuer. | sed. | dolore. |
tincidunt nibh lorem sit consectetuer dolor amet dolore euismod lorem. magna dolore euismod elit dolor diam dolor magna sed dolor. magna elit sit ipsum ut laoreet nonummy laoreet dolore lorem. adipiscing sed euismod erat nibh nibh ipsum magna dolor tincidunt.
elit erat ut dolor elit ut adipiscing elit aliquam diam diam. nibh diam erat nibh ut diam amet euismod laoreet nibh sed. consectetuer ut laoreet tincidunt diam dolor ut nonummy ut diam laoreet. lorem diam ipsum nibh adipiscing amet consectetuer consectetuer sit dolor sed. tincidunt ipsum lorem elit tincidunt tincidunt dolor laoreet tincidunt erat sit.
elit ut amet sit euismod sed. ut lorem laoreet sed nonummy diam. sit dolor erat elit nonummy elit. consectetuer magna ipsum tincidunt euismod dolor.
erat nonummy lorem ipsum nonummy tincidunt tincidunt tincidunt consectetuer. nibh magna sit nonummy erat dolore adipiscing sed laoreet. tincidunt dolore erat tincidunt ipsum dolor ut nibh ipsum.
| Shear Strength | Type | Substrate | Test Temperature | Test Method |
|---|---|---|---|---|
| Excellent | Dynamic shear strength | Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. | |
| Excellent | Static shear strength | Acrylic (A-20) | 25°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Excellent | Static shear strength | Acrylic (A-20) | 49°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Excellent | Static shear strength | Acrylic (A-20) | 70°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Tensile Strength | Test Method |
|---|---|
| 740 psi | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
| Peel Strength | Type | Substrate | Test Method |
|---|---|---|---|
| Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
| Good | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
| 3 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polypropylene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 11 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polystyrene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | ABS | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Stainless Steel | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Aluminum | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| General Bond Strength | Substrate | Test Method |
|---|---|---|
| Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
| Fair | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
| Abrasion Resistance | Test Method |
|---|---|
| Abrasion resistance | ASTM-C501, Taber H18, 1kg) g/1000 cycles |
| Other Resistance | Test Method |
|---|---|
| Excellent skid resistance | |
| marring | |
| staining | 3M-24 hours @ 158°F against white paint 7 days exposed to UV |
| Aging resistance |
| Dielectric Strength | Test Method |
|---|
| Elongation | Test Method |
|---|---|
| 65 % | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
