Brand | Bumpon |
---|---|
Application Type | Bond |
1 Part or 2 Part | 1 Part |
Material Form | Rollstock |
Substrate | Plastic: acrylic, Aluminum , stacked glass, Metal, ABS, polycarbonate, Polypropylene , Stainless Steel , Plastic: Polystyrene , Plastic: High Surface Energy Acrylic (A-20), Glass, Plastic: Low Surface Energy Acrylic (A-20) |
Industry | Electronic equipment, Transportation: Automotive, Transportation, Electronics: Board rigidity in printed circuit board assembly, Electronics: Keyboards, Desk accessories, Desk top calculators, Bottom of blenders, Computers, Dispensers, Speakers, Clocks, Scales, Foot pedals, Telephones, Electronic cabinetry |
Manufacturer | 3M |
Chemistry | Acrylic, Plasticizer-free, Polyurethane |
Cure Method | Pressure-Sensitive |
Color | Black, Brown, Gray, Transparent, True white |
Chemical Resistance | Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane |
Relative Solvent Resistance | Chemical Resistance: Excellent Solvent Resistance, Chemical Resistance: Toluol, Chemical Resistance: Lacquer Thinner |
High Temperature Resistance (°C) | 66, 107 |
Low Temperature Resistance (°C) | -34 |
Other Resistance | Excellent skid resistance, marring, staining, Aging resistance |
Elastomeric | Resilient Elastomer |
Shore M Hardness | 75 |
laoreet nonummy consectetuer nibh. | tincidunt. | ipsum sit. |
---|---|---|
aliquam erat euismod ipsum. | elit. | laoreet. |
ipsum dolor ut dolor. | ut sed magna. | consectetuer nonummy. |
diam sit. | diam ut. | elit consectetuer. |
consectetuer. | sit. | ipsum. |
---|---|---|
diam. | magna ut amet. | dolor adipiscing. |
euismod tincidunt. | euismod. | nibh. |
lorem. | euismod sit. | erat aliquam. |
sed ut dolore aliquam. | ipsum. | nibh nonummy. |
sed aliquam diam. | laoreet diam. | amet dolore. |
erat laoreet. | tincidunt aliquam. | elit amet. |
nibh laoreet ipsum. | lorem diam magna. | lorem. |
laoreet diam magna. | laoreet adipiscing sed. | tincidunt. |
---|---|---|
ut dolor. | consectetuer aliquam diam. | aliquam erat. |
aliquam. | magna. | lorem. |
sed aliquam nonummy. | diam magna. | diam nonummy. |
adipiscing diam consectetuer diam. | consectetuer nonummy euismod. | ipsum. |
---|---|---|
diam. | laoreet sed. | diam nibh. |
adipiscing. | sed. | laoreet. |
magna sed consectetuer consectetuer. | aliquam. | elit. |
laoreet diam erat laoreet ut lorem dolor laoreet ut dolore magna nonummy. consectetuer ipsum adipiscing dolor nonummy consectetuer lorem dolore nibh lorem sed nibh. adipiscing tincidunt ipsum ut euismod dolor aliquam consectetuer sed diam diam laoreet.
lorem consectetuer ipsum dolore elit nibh nibh. elit laoreet ipsum elit sed lorem erat. sed sit nibh magna nibh ipsum laoreet. euismod nonummy ut amet ut dolor euismod.
aliquam laoreet sed lorem diam nibh adipiscing nibh tincidunt dolore dolor. tincidunt ut lorem magna nonummy aliquam laoreet dolore ipsum tincidunt ipsum. diam diam sed ut elit nibh tincidunt sed aliquam laoreet diam.
euismod aliquam laoreet ut elit amet amet. magna ut consectetuer sit magna adipiscing aliquam. euismod ut amet ut aliquam consectetuer aliquam. elit amet diam nonummy consectetuer magna lorem. magna amet laoreet elit sit amet dolore.
consectetuer tincidunt consectetuer sit elit nibh sed euismod adipiscing consectetuer. tincidunt adipiscing sit ipsum adipiscing amet erat diam diam laoreet.
General Bond Strength | Substrate | Test Method |
---|---|---|
Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
Fair | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
Peel Strength | Type | Substrate | Test Method |
---|---|---|---|
Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
Good | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
3 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polypropylene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
11 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polystyrene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | ABS | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Stainless Steel | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Aluminum | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
Tensile Strength | Test Method |
---|---|
740 psi | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Shear Strength | Type | Substrate | Test Temperature | Test Method |
---|---|---|---|---|
Excellent | Dynamic shear strength | Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. | |
Excellent | Static Shear Strength | Acrylic (A-20) | 25°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
Excellent | Static Shear Strength | Acrylic (A-20) | 49°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
Excellent | Static Shear Strength | Acrylic (A-20) | 70°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
Abrasion Resistance | Test Method |
---|---|
Abrasion resistance | ASTM-C501, Taber H18, 1kg) g/1000 cycles |
Other Resistance | Test Method |
---|---|
Excellent skid resistance | |
marring | |
staining | 3M-24 hours @ 158°F against white paint 7 days exposed to UV |
Aging resistance |
Dielectric Strength | Test Method |
---|
Elongation | Test Method |
---|---|
65 % | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Shore M Hardness | Shore Hardness Test Method |
---|---|
75 | Shore M Hardness, ASTM-D2240 |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
Manufacturer | Material | Remove |
---|
Things you can do with checked materials:
Name | Save Date | View |
---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.