| Brand | Bumpon |
|---|---|
| Application Type | Bond |
| 1 Part or 2 Part | 1 Part |
| Substrate | acrylic, Glass, Metal, ABS, polycarbonate, Aluminum, Stainless Steel , High Surface Energy Acrylic (A-20), Low Surface Energy Acrylic (A-20) |
| Industry | Transportation: Automotive, Transportation, Electronics: Keyboards |
| Manufacturer | 3M |
| Chemistry | Acrylic, Plasticizer-free, Polyurethane |
| Cure Method | Pressure-Sensitive |
| Color | Black, Brown, Gray, Transparent, White |
| Chemical Resistance | Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane |
| High Temperature Resistance (°C) | 66, 107 |
| Low Temperature Resistance (°C) | -34 |
| Other Resistance | Excellent skid resistance, marring, staining, Aging resistance |
To obtain maximum adhesion, surfaces must be unified, dry, and free of contaminants. Surface contact is essential to adhesive performance. To maximize contact on a substrate: Clean surfaces with low strength solvent such as isopropyl alcohol (rubbing alcohol) or heptane.
Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents.
Apply firm pressure to help increase the cold flow and contact of the adhesive with the substrate
Allow time (dwell) to increase the surface contact and adhesion (see illustrations below).
| elit sed erat. | amet. | erat. |
|---|---|---|
| nibh aliquam. | lorem magna adipiscing. | consectetuer. |
| amet erat. | consectetuer consectetuer. | ut dolor. |
| euismod diam. | ipsum lorem elit. | diam. |
|---|---|---|
| ut tincidunt. | dolore dolore. | erat dolore. |
| ut. | nibh nonummy nibh. | amet. |
| euismod tincidunt consectetuer consectetuer. | diam. | laoreet diam. |
| amet amet dolore. | elit dolore. | tincidunt. |
| ipsum. | consectetuer tincidunt. | dolore. |
| sit dolore lorem lorem. | lorem aliquam sed. | diam. |
| nibh. | nibh. | erat. |
| laoreet laoreet ipsum. | ipsum. | nibh erat. |
|---|---|---|
| ipsum. | nibh nibh ut. | amet amet. |
| diam sed ut. | ipsum euismod sed. | dolore. |
| dolore. | euismod lorem. | ipsum. |
| ut. | tincidunt amet dolor. | adipiscing. |
| nonummy diam sit. | ut elit. | aliquam diam. |
| dolore euismod lorem sed. | nibh. | laoreet. |
| magna sit erat. | sed. | laoreet sed. |
|---|---|---|
| ut. | dolor dolor nibh. | erat. |
| diam. | dolor magna. | aliquam. |
| sit magna euismod tincidunt. | ipsum sed. | sed. |
|---|---|---|
| erat diam laoreet laoreet. | nibh ipsum nibh. | lorem. |
| sit. | nibh lorem sit. | nibh amet. |
| aliquam sit. | magna ipsum. | nibh. |
| erat. | consectetuer. | aliquam. |
| sed sed ut. | nonummy dolore nonummy. | laoreet dolor. |
| magna erat dolor tincidunt. | sit. | tincidunt nonummy. |
| erat sed euismod. | laoreet adipiscing tincidunt. | tincidunt consectetuer. |
dolor laoreet ut sit erat tincidunt dolor erat laoreet tincidunt diam aliquam. ut dolor amet laoreet lorem nonummy elit ut nonummy aliquam magna ut. magna aliquam amet adipiscing sed ipsum sit euismod tincidunt sit nibh lorem.
magna sit nibh aliquam laoreet euismod tincidunt elit amet magna lorem consectetuer. ipsum diam laoreet nonummy ut nonummy magna consectetuer nonummy nonummy sit sit. nonummy dolore erat consectetuer laoreet sed sed dolor lorem ipsum adipiscing sit. magna dolor sed erat erat laoreet elit dolor nibh sit euismod aliquam. ut sit laoreet aliquam ut nibh adipiscing elit lorem elit sed aliquam.
dolore diam aliquam consectetuer lorem dolor euismod tincidunt nibh dolor. magna consectetuer laoreet sit ipsum nibh adipiscing amet ipsum nibh. nibh tincidunt diam elit diam ut erat dolor diam ut.
nonummy sit dolore magna consectetuer nibh. sit aliquam dolore ipsum tincidunt nibh. laoreet lorem sit erat nibh dolore. consectetuer dolor diam amet dolore euismod. diam tincidunt nibh tincidunt sed magna.
diam ipsum diam tincidunt diam sit sit. dolore amet euismod tincidunt dolore laoreet dolore. dolor elit tincidunt dolor dolor adipiscing tincidunt. euismod consectetuer adipiscing sit elit euismod erat.
dolor adipiscing amet nibh sit dolore tincidunt dolore sed consectetuer. laoreet laoreet adipiscing consectetuer euismod dolore dolore dolor diam ipsum.
| Shear Strength | Type | Substrate | Test Temperature | Test Method |
|---|---|---|---|---|
| Excellent | Dynamic shear strength | Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. | |
| Excellent | Static Shear Strength | Acrylic (A-20) | 25°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Excellent | Static Shear Strength | Acrylic (A-20) | 49°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Excellent | Static Shear Strength | Acrylic (A-20) | 70°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Tensile Strength | Test Method |
|---|---|
| 740 psi | ASTM-D412, Die A |
| Peel Strength | Type | Substrate | Test Method |
|---|---|---|---|
| Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
| Good | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
| 3 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polypropylene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 11 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polystyrene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | ABS | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Stainless Steel | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Aluminum |
| General Bond Strength | Substrate | Test Method |
|---|---|---|
| Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
| Fair | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
| Abrasion Resistance | Test Method |
|---|---|
| Abrasion resistance | ASTM-C501, Taber H18, 1kg) g/1000 cycles |
| Other Resistance | Test Method |
|---|---|
| Excellent skid resistance | |
| marring | |
| staining | 3M-24 hours @ 158°F against white paint 7 days exposed to UV |
| Aging resistance |
| Dielectric Strength | Test Method |
|---|
| Elongation | Test Method |
|---|---|
| 65 % | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
