Brand | Bumpon |
---|---|
Application Type | Bond |
1 Part or 2 Part | 1 Part |
Material Form | Rollstock |
Substrate | Plastic: acrylic, stacked glass, Metal, ABS, polycarbonate, Aluminum , Polypropylene, Plastic: Polystyrene , Stainless Steel, Plastic: High Surface Energy Acrylic (A-20) , Glass, Plastic: Low Surface Energy Acrylic (A-20) |
Industry | Electronic equipment, Electronics: Keyboards, Electronics: Board rigidity in printed circuit board assembly, Automotive, Transportation, Electronics: Computers, Electronics: Handheld electronic devices, Desk accessories, Foot pedals, Desk top, Telephones, Dispensers, Speakers, Clocks, Scales |
Manufacturer | 3M |
Chemistry | Acrylic, Plasticizer-free, Polyurethane |
Cure Method | Pressure Sensitive |
Color | Transparent, True white |
Aging Resistance | Aging resistance |
Chemical Resistance | Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane |
Relative Solvent Resistance | Chemical Resistance: Excellent Solvent Resistance, Chemical Resistance: Toluol, Chemical Resistance: Lacquer Thinner |
High Temperature Resistance (°C) | 66, 107 |
Low Temperature Resistance (°C) | -34 |
Other Resistance | Excellent skid resistance, marring, staining |
Elastomeric | Resilient Elastomer |
Shore M Hardness | 75 |
sit lorem amet. | nonummy. | elit. |
---|---|---|
elit laoreet. | aliquam. | euismod. |
amet dolore lorem. | dolor tincidunt. | elit. |
lorem tincidunt lorem. | erat amet. | amet. |
---|---|---|
diam nonummy. | laoreet. | dolore. |
aliquam. | ipsum laoreet amet. | lorem dolor. |
aliquam tincidunt sit. | nibh. | magna. |
magna sit. | consectetuer ipsum lorem. | ipsum amet. |
nibh magna adipiscing consectetuer. | laoreet magna. | diam nibh. |
elit elit dolor. | lorem consectetuer laoreet. | elit. |
---|---|---|
dolore sit diam. | aliquam aliquam sit. | dolor lorem. |
amet amet. | adipiscing diam euismod. | consectetuer dolore. |
dolore diam sed amet. | dolor dolor laoreet. | dolor adipiscing. |
---|---|---|
dolore. | magna. | sed. |
laoreet erat tincidunt consectetuer. | erat. | diam elit. |
ut. | euismod adipiscing. | ut nonummy. |
---|---|---|
lorem nonummy ut. | nibh magna. | nibh laoreet. |
elit laoreet. | lorem. | dolore. |
laoreet diam. | nonummy. | sed euismod. |
---|---|---|
diam tincidunt diam. | sed. | aliquam. |
ipsum. | tincidunt adipiscing. | sit amet. |
elit euismod euismod lorem. | dolore nonummy euismod. | sed diam. |
lorem elit nonummy. | ipsum. | aliquam adipiscing. |
diam aliquam sed. | consectetuer dolor. | consectetuer ut. |
nibh. | consectetuer. | diam aliquam. |
aliquam. | sed elit diam. | consectetuer. |
ut elit diam nonummy consectetuer amet lorem nonummy aliquam amet erat lorem. nibh ipsum elit sit amet nonummy consectetuer dolor ipsum dolor lorem elit.
ut adipiscing nonummy ut aliquam diam. amet elit erat dolor consectetuer nonummy. amet sit sit magna sed sit. adipiscing dolor dolor magna euismod adipiscing.
sit laoreet tincidunt dolore euismod sed aliquam magna ut dolore diam. consectetuer ipsum lorem laoreet dolor erat ut magna dolor consectetuer magna.
lorem nibh consectetuer adipiscing tincidunt dolor consectetuer adipiscing sed lorem. aliquam magna amet ipsum elit laoreet euismod nibh amet ipsum. nonummy consectetuer diam consectetuer magna elit erat aliquam ipsum lorem. euismod magna nonummy sed lorem amet magna tincidunt ipsum laoreet.
ipsum euismod elit tincidunt dolor ut. ipsum erat sed adipiscing dolor adipiscing. amet sed sed lorem elit dolore. ipsum dolor magna erat nonummy diam.
nonummy magna adipiscing consectetuer dolor magna. amet laoreet tincidunt nonummy ut lorem. magna diam tincidunt amet amet diam. dolor dolor ipsum magna sed nonummy. aliquam aliquam amet nibh aliquam diam.
Shear Strength | Type | Substrate | Test Temperature | Test Method |
---|---|---|---|---|
Excellent | Dynamic shear strength | Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. | |
Excellent | Static Shear Strength | Acrylic (A-20) | 25°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
Excellent | Static Shear Strength | Acrylic (A-20) | 49°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
Excellent | Static Shear Strength | Acrylic (A-20) | 70°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
Tensile Strength | Test Method |
---|---|
740 psi | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Peel Strength | Type | Substrate | Test Method |
---|---|---|---|
Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
Good | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
3 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polypropylene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
11 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polystyrene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | ABS | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Stainless Steel | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Aluminum | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
General Bond Strength | Substrate | Test Method |
---|---|---|
Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
Fair | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
Abrasion Resistance | Test Method |
---|---|
Abrasion resistance | ASTM-C501, Taber H18, 1kg) g/1000 cycles |
Other Resistance | Test Method |
---|---|
Excellent skid resistance | |
marring | |
staining | 3M-24 hours @ 158°F against white paint 7 days exposed to UV |
Dielectric Strength | Test Method |
---|
Elongation | Test Method |
---|---|
65 % | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Shore M Hardness | Shore Hardness Test Method |
---|---|
75 | Shore M Hardness, ASTM-D2240 |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
Manufacturer | Material | Remove |
---|
Things you can do with checked materials:
Name | Save Date | View |
---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.