| Brand | Bumpon |
|---|---|
| Application Type | Bond |
| 1 Part or 2 Part | 1 Part |
| Material Form | Rollstock |
| Substrate | Acrylic, stacked glass, Metal, ABS, polycarbonate, High Surface Energy Acrylic (A-20), Glass, Low Surface Energy Acrylic (A-20) |
| Industry | Electronic equipment, Electronics: Keyboards, Electronics: Board rigidity in printed circuit board assembly, Transportation: Automotive, Transportation, Desk accessories, Handheld electronic devices, Desk top, Computers, Dispensers, Speakers, Clocks, Scales, Foot pedals, Telephones, Electronic cabinetry |
| Manufacturer | 3M |
| Chemistry | Acrylic, Plasticizer-free, Polyurethane |
| Cure Method | Pressure Sensitive |
| Color | Transparent, True white, Black, Brown, Gray |
| Chemical Resistance | Detergent in water, Ammonia in water, Bleach, Hydrochloric Acid, Diesel Fuel, Auto Oil, Isopropyl Alcohol, Heptane |
| Relative Solvent Resistance | Chemical Resistance: Excellent Solvent Resistance, Chemical Resistance: Toluol, Chemical Resistance: Lacquer Thinner |
| High Temperature Resistance (°C) | 66, 107 |
| Low Temperature Resistance (°C) | -34 |
| Other Resistance | Excellent skid resistance, marring, staining, Aging resistance |
To obtain maximum adhesion, surfaces must be unified, dry, and free of contaminants. Surface contact is essential to adhesive performance. To maximize contact on a substrate: Clean surfaces with low strength solvent such as isopropyl alcohol (rubbing alcohol) or heptane.
Note: Be sure to follow the manufacturer’s precautions and directions for use when using solvents.
Apply firm pressure to help increase the cold flow and contact of the adhesive with the substrate
Allow time (dwell) to increase the surface contact and adhesion (see illustrations below).
| dolore adipiscing. | tincidunt dolor. | aliquam. |
|---|---|---|
| ut magna elit. | lorem tincidunt. | amet amet. |
| amet ipsum. | sed. | amet nonummy. |
| euismod euismod diam diam. | dolore diam erat. | laoreet. |
| laoreet nibh. | magna euismod diam. | laoreet aliquam. |
| consectetuer euismod nibh elit. | erat elit elit. | laoreet amet. |
|---|---|---|
| ut dolore lorem dolore. | nibh. | laoreet erat. |
| diam aliquam magna. | erat diam. | sed. |
| nibh. | magna laoreet. | elit lorem. |
| euismod. | dolor consectetuer adipiscing. | amet magna. |
| dolor. | nibh magna. | sed. |
|---|---|---|
| amet adipiscing. | erat laoreet. | nonummy dolor. |
| nibh dolor ut. | dolor elit. | amet. |
| nibh consectetuer erat nibh. | consectetuer. | adipiscing. |
| erat tincidunt. | dolor aliquam tincidunt. | nonummy sed. |
|---|---|---|
| sit. | consectetuer magna nibh. | euismod. |
| laoreet nibh. | magna euismod dolore. | euismod nibh. |
| magna euismod euismod consectetuer. | diam dolor dolor. | elit. |
| adipiscing adipiscing sit ut. | nibh. | adipiscing tincidunt. |
| lorem sed. | elit nonummy. | tincidunt ut. |
nonummy diam tincidunt tincidunt laoreet aliquam sit sed. laoreet euismod dolor adipiscing aliquam sed ipsum dolor.
dolor magna laoreet ipsum laoreet dolore aliquam ipsum nonummy euismod erat ut. laoreet aliquam dolor adipiscing magna dolor lorem amet euismod amet sed laoreet. adipiscing aliquam consectetuer tincidunt tincidunt sit dolor amet magna dolore laoreet adipiscing. tincidunt ut magna consectetuer elit magna aliquam sed sit amet lorem elit. consectetuer elit diam consectetuer sed nibh consectetuer magna sed lorem ut dolore.
tincidunt sit amet ut dolore laoreet consectetuer erat nibh dolor magna. aliquam elit consectetuer tincidunt dolore laoreet adipiscing nibh aliquam magna tincidunt.
tincidunt adipiscing lorem tincidunt laoreet nonummy euismod diam sed. nibh aliquam nibh magna ipsum euismod tincidunt aliquam nonummy.
| Shear Strength | Type | Substrate | Test Temperature | Test Method |
|---|---|---|---|---|
| Excellent | Dynamic shear strength | Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. | |
| Excellent | Static Shear Strength | Acrylic (A-20) | 25°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Excellent | Static Shear Strength | Acrylic (A-20) | 49°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Excellent | Static Shear Strength | Acrylic (A-20) | 70°C | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives. |
| Tensile Strength | Test Method |
|---|---|
| 740 psi | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
| Peel Strength | Type | Substrate | Test Method |
|---|---|---|---|
| Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
| Good | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives | |
| 3 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polypropylene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 11 (oz. Per 1/2 inch) | 90° Peel Adhesion | Polystyrene | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | ABS | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Stainless Steel | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| 25 (oz. Per 1/2 inch) | 90° Peel Adhesion | Aluminum | Acrylic A-20, 3M Test Method TM-2011, 72 hour dwell, 1/2 inch wide samples pulled at 12 inches per minute. Testing completed using Bumpon Resilient Rollstock products SJ5816, SJ6016, and SJ6216, which use the same adhesive system as the molded series products. |
| General Bond Strength | Substrate | Test Method |
|---|---|---|
| Poor | Low Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS,_x00D_ polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
| Fair | High Surface Energy Acrylic (A-20) | Acrylic (A-20) - Used in the construction of 3M™ Bumpon Protective Product Series SJ-5200, SJ-5300, and SJ-5400, this high strength adhesive system provides excellent shear strength properties. The adhesive has the capability of providing excellent adhesion to many high surface energy substrates such as metals, ABS, polycarbonate, and acrylic. When adhesion is required on low surface energy/substrates (e.g., polypropylene, polyethylene, etc.), acrylic-based adhesives do not perform as well as rubber-based adhesives |
| Abrasion Resistance | Test Method |
|---|---|
| Abrasion resistance | ASTM-C501, Taber H18, 1kg) g/1000 cycles |
| Other Resistance | Test Method |
|---|---|
| Excellent skid resistance | |
| marring | |
| staining | 3M-24 hours @ 158°F against white paint 7 days exposed to UV |
| Aging resistance |
| Dielectric Strength | Test Method |
|---|
| Elongation | Test Method |
|---|---|
| 65 % | ASTM-D412, Die A, These properties were run on sheet material from the same materials as the individual Bumpon products |
Message sent - We'll get back shortly
Message sent - We'll get back shortly! Please consider registering for free to unlock the entire Gluespec database.
Great! Contact us if you have any additional questions.
You will lose your saved materials unless you register. Please register.
| Manufacturer | Material | Remove |
|---|
Things you can do with checked materials:
| Name | Save Date | View |
|---|
Need help? Our knowledgeable experts help you achieve your goals by giving you application insights. They are available personally to help you before, during or after your search.
